From mboxrd@z Thu Jan 1 00:00:00 1970 From: Krzysztof Kozlowski Date: Wed, 14 Aug 2024 16:06:00 +0200 Subject: [PATCH v2 2/2] irqchip/aspeed-intc: Add support for AST27XX INTC In-Reply-To: <20240814114106.2809876-4-kevin_chen@aspeedtech.com> References: <20240814114106.2809876-1-kevin_chen@aspeedtech.com> <20240814114106.2809876-4-kevin_chen@aspeedtech.com> Message-ID: <4817e23e-a726-4557-b756-e0cbc54eebaa@kernel.org> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit On 14/08/2024 13:41, Kevin Chen wrote: > Support for the Aspeed Interrupt Controller found on Aspeed Silicon SoCs, > such as the AST2700, which is arm64 architecture. > > To support ASPEED interrupt controller(INTC) maps the internal interrupt > sources of the AST27XX device to an parent interrupt controller. > --- > drivers/irqchip/Makefile | 1 + > drivers/irqchip/irq-aspeed-intc.c | 137 ++++++++++++++++++++++++++++++ > 2 files changed, 138 insertions(+) > create mode 100644 drivers/irqchip/irq-aspeed-intc.c > > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile > index 15635812b2d6..5da3f2f4eede 100644 > --- a/drivers/irqchip/Makefile > +++ b/drivers/irqchip/Makefile > @@ -84,6 +84,7 @@ obj-$(CONFIG_MVEBU_SEI) += irq-mvebu-sei.o > obj-$(CONFIG_LS_EXTIRQ) += irq-ls-extirq.o > obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o > obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o irq-aspeed-i2c-ic.o irq-aspeed-scu-ic.o > +obj-$(CONFIG_ASPEED_G7_INTC) += irq-aspeed-intc.o There is no such config symbol. You already got this exact comment. Replacing one broken code with other broken code is not the solution. Best regards, Krzysztof