[PATCH linux dev-5.2] ARM: dts: aspeed: swift: Fix FSI GPIOs

[Andrew Jeffery <andrew@aj.id.au>]

On Sat, 20 Jul 2019, at 06:01, Matt Spinler wrote:
> From: Matt Spinler <spinler@us.ibm.com>
> 
> Change the FSI clock and data GPIOs to match what the hardware turned
> out to use.
> 
> Signed-off-by: Matt Spinler <spinler@us.ibm.com>

Reviewed-by: Andrew Jeffery <andrew@aj.id.au>

And yeah, please make sure to include relevant lists in the future as Olof
mentioned.

Andrew

> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts 
> b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
> index caac895c60b4..f14f745b34ca 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
> @@ -207,8 +207,8 @@
>  		#size-cells = <0>;
>  		no-gpio-delays;
>  
> -		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
> -		data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
> +		clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
> +		data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
>  		mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
>  		enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
>  		trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
> -- 
> 2.22.0
> 
>