From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Date: Wed, 7 Sep 2022 11:44:03 -0700 Subject: [PATCH net-next v3 2/2] ARM: dts: aspeed: elbert: Enable mac3 controller In-Reply-To: <20220907054453.20016-3-rentao.bupt@gmail.com> References: <20220907054453.20016-1-rentao.bupt@gmail.com> <20220907054453.20016-3-rentao.bupt@gmail.com> Message-ID: <7f3a2e42-6214-c41f-90f7-53ee637a720d@gmail.com> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit On 9/6/2022 10:44 PM, rentao.bupt at gmail.com wrote: > From: Tao Ren > > Enable mac3 controller in Elbert dts: Elbert MAC3 is connected to the > BCM53134P onboard switch's IMP_RGMII port directly (fixed link, no PHY > between BMC MAC and BCM53134P). > > Note: BMC's mdio0 controller is connected to BCM53134P's MDIO interface, > and the MDIO channel will be enabled later, when BCM53134 is added to > "bcm53xx" DSA driver. > > Signed-off-by: Tao Ren Reviewed-by: Florian Fainelli -- Florian