* [PATCH dts/arm/aspeed-g5 v1] ARM: dts: aspeed-g5: Add IPMI KCS node
@ 2018-03-07 5:04 Haiyue Wang
2018-03-16 0:47 ` Wang, Haiyue
0 siblings, 1 reply; 4+ messages in thread
From: Haiyue Wang @ 2018-03-07 5:04 UTC (permalink / raw)
To: linux-aspeed
The IPMI KCS device part of the LPC interface and is used for
communication with the host processor.
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 43 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 8eac57c..f443169 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -267,8 +267,40 @@
ranges = <0x0 0x1e789000 0x1000>;
lpc_bmc: lpc-bmc at 0 {
- compatible = "aspeed,ast2500-lpc-bmc";
+ compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
reg = <0x0 0x80>;
+ reg-io-width = <4>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x80>;
+
+ kcs1: kcs1 at 0 {
+ compatible = "aspeed,ast2500-kcs-bmc";
+ reg = <0x0 0x80>;
+ interrupts = <8>;
+ kcs_chan = <1>;
+ kcs_addr = <0x0>;
+ status = "disabled";
+ };
+
+ kcs2: kcs2 at 0 {
+ compatible = "aspeed,ast2500-kcs-bmc";
+ reg = <0x0 0x80>;
+ interrupts = <8>;
+ kcs_chan = <2>;
+ kcs_addr = <0x0>;
+ status = "disabled";
+ };
+
+ kcs3: kcs3 at 0 {
+ compatible = "aspeed,ast2500-kcs-bmc";
+ reg = <0x0 0x80>;
+ interrupts = <8>;
+ kcs_chan = <3>;
+ kcs_addr = <0x0>;
+ status = "disabled";
+ };
};
lpc_host: lpc-host at 80 {
@@ -294,6 +326,15 @@
status = "disabled";
};
+ kcs4: kcs4 at 0 {
+ compatible = "aspeed,ast2500-kcs-bmc";
+ reg = <0x0 0xa0>;
+ interrupts = <8>;
+ kcs_chan = <4>;
+ kcs_addr = <0x0>;
+ status = "disabled";
+ };
+
lhc: lhc at 20 {
compatible = "aspeed,ast2500-lhc";
reg = <0x20 0x24 0x48 0x8>;
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH dts/arm/aspeed-g5 v1] ARM: dts: aspeed-g5: Add IPMI KCS node
2018-03-07 5:04 [PATCH dts/arm/aspeed-g5 v1] ARM: dts: aspeed-g5: Add IPMI KCS node Haiyue Wang
@ 2018-03-16 0:47 ` Wang, Haiyue
2018-05-25 4:34 ` Joel Stanley
0 siblings, 1 reply; 4+ messages in thread
From: Wang, Haiyue @ 2018-03-16 0:47 UTC (permalink / raw)
To: linux-aspeed
Hi Joel and Andrew,
Have time to review this patch ? Hope for your comments. :-)
BR,
Haiyue
On 2018-03-07 13:04, Haiyue Wang wrote:
> The IPMI KCS device part of the LPC interface and is used for
> communication with the host processor.
>
> Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
> ---
> arch/arm/boot/dts/aspeed-g5.dtsi | 43 +++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 42 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
> index 8eac57c..f443169 100644
> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
> @@ -267,8 +267,40 @@
> ranges = <0x0 0x1e789000 0x1000>;
>
> lpc_bmc: lpc-bmc at 0 {
> - compatible = "aspeed,ast2500-lpc-bmc";
> + compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
> reg = <0x0 0x80>;
> + reg-io-width = <4>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x80>;
> +
> + kcs1: kcs1 at 0 {
> + compatible = "aspeed,ast2500-kcs-bmc";
> + reg = <0x0 0x80>;
> + interrupts = <8>;
> + kcs_chan = <1>;
> + kcs_addr = <0x0>;
> + status = "disabled";
> + };
> +
> + kcs2: kcs2 at 0 {
> + compatible = "aspeed,ast2500-kcs-bmc";
> + reg = <0x0 0x80>;
> + interrupts = <8>;
> + kcs_chan = <2>;
> + kcs_addr = <0x0>;
> + status = "disabled";
> + };
> +
> + kcs3: kcs3 at 0 {
> + compatible = "aspeed,ast2500-kcs-bmc";
> + reg = <0x0 0x80>;
> + interrupts = <8>;
> + kcs_chan = <3>;
> + kcs_addr = <0x0>;
> + status = "disabled";
> + };
> };
>
> lpc_host: lpc-host at 80 {
> @@ -294,6 +326,15 @@
> status = "disabled";
> };
>
> + kcs4: kcs4 at 0 {
> + compatible = "aspeed,ast2500-kcs-bmc";
> + reg = <0x0 0xa0>;
> + interrupts = <8>;
> + kcs_chan = <4>;
> + kcs_addr = <0x0>;
> + status = "disabled";
> + };
> +
> lhc: lhc at 20 {
> compatible = "aspeed,ast2500-lhc";
> reg = <0x20 0x24 0x48 0x8>;
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH dts/arm/aspeed-g5 v1] ARM: dts: aspeed-g5: Add IPMI KCS node
2018-03-16 0:47 ` Wang, Haiyue
@ 2018-05-25 4:34 ` Joel Stanley
2018-05-25 11:33 ` Wang, Haiyue
0 siblings, 1 reply; 4+ messages in thread
From: Joel Stanley @ 2018-05-25 4:34 UTC (permalink / raw)
To: linux-aspeed
Hello Andrew,
On 16 March 2018 at 11:17, Wang, Haiyue <haiyue.wang@linux.intel.com> wrote:
> Hi Joel and Andrew,
>
> Have time to review this patch ? Hope for your comments. :-)
>
> BR,
> Haiyue
>
>
> On 2018-03-07 13:04, Haiyue Wang wrote:
>>
>> The IPMI KCS device part of the LPC interface and is used for
>> communication with the host processor.
>>
>> Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Do you have time to take a look at these? The device tree doesn't make
sense to me.
Cheers,
Joel
>> ---
>> arch/arm/boot/dts/aspeed-g5.dtsi | 43
>> +++++++++++++++++++++++++++++++++++++++-
>> 1 file changed, 42 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi
>> b/arch/arm/boot/dts/aspeed-g5.dtsi
>> index 8eac57c..f443169 100644
>> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
>> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
>> @@ -267,8 +267,40 @@
>> ranges = <0x0 0x1e789000 0x1000>;
>> lpc_bmc: lpc-bmc at 0 {
>> - compatible =
>> "aspeed,ast2500-lpc-bmc";
>> + compatible =
>> "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
>> reg = <0x0 0x80>;
>> + reg-io-width = <4>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x0 0x0 0x80>;
>> +
>> + kcs1: kcs1 at 0 {
>> + compatible =
>> "aspeed,ast2500-kcs-bmc";
>> + reg = <0x0 0x80>;
>> + interrupts = <8>;
>> + kcs_chan = <1>;
>> + kcs_addr = <0x0>;
>> + status = "disabled";
>> + };
>> +
>> + kcs2: kcs2 at 0 {
>> + compatible =
>> "aspeed,ast2500-kcs-bmc";
>> + reg = <0x0 0x80>;
>> + interrupts = <8>;
>> + kcs_chan = <2>;
>> + kcs_addr = <0x0>;
>> + status = "disabled";
>> + };
>> +
>> + kcs3: kcs3 at 0 {
>> + compatible =
>> "aspeed,ast2500-kcs-bmc";
>> + reg = <0x0 0x80>;
>> + interrupts = <8>;
>> + kcs_chan = <3>;
>> + kcs_addr = <0x0>;
>> + status = "disabled";
>> + };
>> };
>> lpc_host: lpc-host at 80 {
>> @@ -294,6 +326,15 @@
>> status = "disabled";
>> };
>> + kcs4: kcs4 at 0 {
>> + compatible =
>> "aspeed,ast2500-kcs-bmc";
>> + reg = <0x0 0xa0>;
>> + interrupts = <8>;
>> + kcs_chan = <4>;
>> + kcs_addr = <0x0>;
>> + status = "disabled";
>> + };
>> +
>> lhc: lhc at 20 {
>> compatible =
>> "aspeed,ast2500-lhc";
>> reg = <0x20 0x24 0x48
>> 0x8>;
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH dts/arm/aspeed-g5 v1] ARM: dts: aspeed-g5: Add IPMI KCS node
2018-05-25 4:34 ` Joel Stanley
@ 2018-05-25 11:33 ` Wang, Haiyue
0 siblings, 0 replies; 4+ messages in thread
From: Wang, Haiyue @ 2018-05-25 11:33 UTC (permalink / raw)
To: linux-aspeed
Hi Joel & Andrew
This patch is out of date. ;-)
New: https://patchwork.ozlabs.org/patch/893720/
On 2018-05-25 12:34, Joel Stanley wrote:
> Hello Andrew,
>
> On 16 March 2018 at 11:17, Wang, Haiyue <haiyue.wang@linux.intel.com> wrote:
>> Hi Joel and Andrew,
>>
>> Have time to review this patch ? Hope for your comments. :-)
>>
>> BR,
>> Haiyue
>>
>>
>> On 2018-03-07 13:04, Haiyue Wang wrote:
>>> The IPMI KCS device part of the LPC interface and is used for
>>> communication with the host processor.
>>>
>>> Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
> Do you have time to take a look at these? The device tree doesn't make
> sense to me.
>
> Cheers,
>
> Joel
>
>>> ---
>>> arch/arm/boot/dts/aspeed-g5.dtsi | 43
>>> +++++++++++++++++++++++++++++++++++++++-
>>> 1 file changed, 42 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi
>>> b/arch/arm/boot/dts/aspeed-g5.dtsi
>>> index 8eac57c..f443169 100644
>>> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
>>> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
>>> @@ -267,8 +267,40 @@
>>> ranges = <0x0 0x1e789000 0x1000>;
>>> lpc_bmc: lpc-bmc at 0 {
>>> - compatible =
>>> "aspeed,ast2500-lpc-bmc";
>>> + compatible =
>>> "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
>>> reg = <0x0 0x80>;
>>> + reg-io-width = <4>;
>>> +
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges = <0x0 0x0 0x80>;
>>> +
>>> + kcs1: kcs1 at 0 {
>>> + compatible =
>>> "aspeed,ast2500-kcs-bmc";
>>> + reg = <0x0 0x80>;
>>> + interrupts = <8>;
>>> + kcs_chan = <1>;
>>> + kcs_addr = <0x0>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + kcs2: kcs2 at 0 {
>>> + compatible =
>>> "aspeed,ast2500-kcs-bmc";
>>> + reg = <0x0 0x80>;
>>> + interrupts = <8>;
>>> + kcs_chan = <2>;
>>> + kcs_addr = <0x0>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + kcs3: kcs3 at 0 {
>>> + compatible =
>>> "aspeed,ast2500-kcs-bmc";
>>> + reg = <0x0 0x80>;
>>> + interrupts = <8>;
>>> + kcs_chan = <3>;
>>> + kcs_addr = <0x0>;
>>> + status = "disabled";
>>> + };
>>> };
>>> lpc_host: lpc-host at 80 {
>>> @@ -294,6 +326,15 @@
>>> status = "disabled";
>>> };
>>> + kcs4: kcs4 at 0 {
>>> + compatible =
>>> "aspeed,ast2500-kcs-bmc";
>>> + reg = <0x0 0xa0>;
>>> + interrupts = <8>;
>>> + kcs_chan = <4>;
>>> + kcs_addr = <0x0>;
>>> + status = "disabled";
>>> + };
>>> +
>>> lhc: lhc at 20 {
>>> compatible =
>>> "aspeed,ast2500-lhc";
>>> reg = <0x20 0x24 0x48
>>> 0x8>;
>>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-05-25 11:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-03-07 5:04 [PATCH dts/arm/aspeed-g5 v1] ARM: dts: aspeed-g5: Add IPMI KCS node Haiyue Wang
2018-03-16 0:47 ` Wang, Haiyue
2018-05-25 4:34 ` Joel Stanley
2018-05-25 11:33 ` Wang, Haiyue
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).