From mboxrd@z Thu Jan 1 00:00:00 1970 From: Oskar Senft Date: Wed, 5 Sep 2018 09:45:38 -0400 Subject: [PATCH 1/2] misc: aspeed: Add Aspeed UART routing control driver. In-Reply-To: References: <20180904202018.198707-1-osk@google.com> <20180904202018.198707-2-osk@google.com> <1536106554.3176480.1496936032.1C7BEEDC@webmail.messagingengine.com> Message-ID: List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit I just had a look at the upstream kernel - there's no drivers/soc/aspeed. I did find drivers/soc, but no subdirectory for aspeed. Should I create that with my commit? Oskar. On Tue, Sep 4, 2018 at 8:19 PM Oskar Senft wrote: > Thanks for the input! > > I had a look at get_maintainer.pl, but thought I'd send it to you and > Linus first to get initial input since we had already talked about it. > > I'll move it to drivers/soc/aspeed and will resend. > > For clarification: Should I send to ALL of the people and lists that > get_maintainer.pl spits out? > > Thanks > Oskar. > > On Tue, Sep 4, 2018 at 8:15 PM Andrew Jeffery wrote: > >> On Wed, 5 Sep 2018, at 07:25, Linus Walleij wrote: >> > On Tue, Sep 4, 2018 at 10:20 PM Oskar Senft wrote: >> > >> > > This driver adds sysfs files that allow the BMC userspace to configure >> > > how UARTs and physical serial I/O ports are routed. >> > > >> > > Tested: Checked correct behavior (both read & write) on TYAN S7106 >> > > board by manually changing routing settings and confirming that bits >> > > flow as expected. Tested for UART1 and UART3 as this board doesn't >> have >> > > the other UARTs wired up in a testable way. >> > > >> > > Signed-off-by: Oskar Senft >> > >> > After reading some other messages about this I realize it's not very >> > much you can do with the standard frameworks and you definately >> > need something like this. Not like I have any better idea. >> > >> > Arnd and Greg are misc maintainers so not you will need to >> > talk to them. >> >> Yes. I'm certainly not a person that can merge them. >> >> Oskar: Please add at least Greg and Arnd as Linus suggests, and in the >> future make use of ./scripts/get_maintainer.pl to identify people and >> lists who should receive the patches. >> >> > >> > I would opt to put it in drivers/soc/aspeed though. >> >> Yep, drivers/soc/aspeed seems like a better place. There are other >> drivers in misc likely should be moved there as well. >> >> Thanks for your feedback Linus. >> >> Andrew >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: