From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joel Stanley Date: Fri, 20 May 2022 03:34:50 +0000 Subject: [GIT PULL] ARM: aspeed: devicetree changes for 5.19 Message-ID: List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi Soc maintainers, Here is the (second) device tree pull request for aspeed socs. The first ended up being the fixes I sent, which Arnd decided to put in -next. The following changes since commit 32e62d1beab70d485980013312e747a25c4e13f7: ARM: dts: aspeed: Add video engine to g6 (2022-04-13 11:53:53 +0930) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc.git tags/aspeed-5.19-devicetree for you to fetch changes up to 8dc7aa0a7246ad0f718d91d09b4d48460508627b: ARM: dts: aspeed: ast2600-evb: Enable GFX device (2022-05-19 17:18:56 +0930) ---------------------------------------------------------------- ASPEED device tree updates for 5.19 - New machine: * Nuvia's DC-SCM BMC - Enable AST2600 GFX, the BMC-driven graphics device - Add a bunch of devices for the AST2600 EVB - Updates to the AST2600 Bletchley machine - Backwards compatible changes to support the new spi-mem based SPI NOR driver ---------------------------------------------------------------- Brandon Wyman (1): ARM: dts: aspeed: everest, rainier: Add power-ffs-sync-history GPIO C?dric Le Goater (2): ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers ARM: dts: aspeed: Enable Dual SPI RX transfers Graeme Gregory (1): ARM: dts: aspeed: Add Nuvia DC-SCM BMC Howard Chiu (3): ARM: dts: aspeed: ast2600-evb: Enable RX delay for MAC0/MAC1 ARM: dts: aspeed: ast2600-evb: Enable video engine ARM: dts: aspeed: ast2600-evb: Enable virtual hub Joel Stanley (2): ARM: dts: aspeed: Add GFX node to AST2600 ARM: dts: aspeed: ast2600-evb: Enable GFX device Neal Liu (1): ARM: dts: aspeed: Add USB2.0 device controller node Potin Lai (7): ARM: dts: aspeed: bletchley: enable ehci0 device node ARM: dts: aspeed: bletchley: switch spi2 driver to aspeed-smc ARM: dts: aspeed: bletchley: Enable mdio0 bus ARM: dts: aspeed: bletchley: update gpio0 line names ARM: dts: aspeed: bletchley: add pca9536 node on each sled ARM: dts: aspeed: bletchley: add eeprom node on each sled ARM: dts: aspeed: bletchley: add sample averaging for ADM1278 Tao Ren (1): ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-ast2600-evb.dts | 39 ++++- .../arm/boot/dts/aspeed-bmc-facebook-bletchley.dts | 182 ++++++++++++++++---- arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 2 +- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 2 +- arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts | 190 +++++++++++++++++++++ arch/arm/boot/dts/aspeed-g4.dtsi | 16 +- arch/arm/boot/dts/aspeed-g5.dtsi | 16 +- arch/arm/boot/dts/aspeed-g6.dtsi | 38 ++++- 9 files changed, 431 insertions(+), 55 deletions(-) create mode 100644 arch/arm/boot/dts/aspeed-bmc-nuvia-dc-scm.dts