From: Zev Weiss <zweiss@equinix.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v3 07/16] ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
Date: Fri, 21 May 2021 07:18:43 +0000 [thread overview]
Message-ID: <YKde0k1UCZacJFc6@packtop> (raw)
In-Reply-To: <20210510054213.1610760-8-andrew@aj.id.au>
On Mon, May 10, 2021 at 12:42:04AM CDT, Andrew Jeffery wrote:
>Move all client-private data out of `struct kcs_bmc` into the KCS client
>implementation.
>
>With this change the KCS BMC core code now only concerns itself with
>abstract `struct kcs_bmc` and `struct kcs_bmc_client` types, achieving
>expected separation of concerns. Further, the change clears the path for
>implementation of alternative userspace interfaces.
>
>The chardev data-structures are rearranged in the same manner applied to
>the KCS device driver data-structures in an earlier patch - `struct
>kcs_bmc_client` is embedded in the client's private data and we exploit
>container_of() to translate as required.
>
>Finally, now that it is free of client data, `struct kcs_bmc` is renamed
>to `struct kcs_bmc_device` to contrast `struct kcs_bmc_client`.
>
>Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
next prev parent reply other threads:[~2021-05-21 7:18 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-10 5:41 [PATCH v3 00/16] ipmi: Allow raw access to KCS devices Andrew Jeffery
2021-05-10 5:41 ` [PATCH v3 01/16] ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties Andrew Jeffery
2021-05-21 7:17 ` Zev Weiss
2021-05-10 5:41 ` [PATCH v3 02/16] ipmi: kcs_bmc: Make status update atomic Andrew Jeffery
2021-05-10 5:42 ` [PATCH v3 03/16] ipmi: kcs_bmc: Rename {read, write}_{status, data}() functions Andrew Jeffery
2021-05-10 5:42 ` [PATCH v3 04/16] ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi Andrew Jeffery
2021-05-10 5:42 ` [PATCH v3 05/16] ipmi: kcs_bmc: Turn the driver data-structures inside-out Andrew Jeffery
2021-05-21 17:14 ` Corey Minyard
2021-05-24 0:53 ` Andrew Jeffery
2021-05-24 15:41 ` [Openipmi-developer] " Corey Minyard
2021-05-25 0:12 ` Andrew Jeffery
2021-05-10 5:42 ` [PATCH v3 06/16] ipmi: kcs_bmc: Split headers into device and client Andrew Jeffery
2021-05-21 7:18 ` Zev Weiss
2021-05-10 5:42 ` [PATCH v3 07/16] ipmi: kcs_bmc: Strip private client data from struct kcs_bmc Andrew Jeffery
2021-05-21 7:18 ` Zev Weiss [this message]
2021-05-10 5:42 ` [PATCH v3 08/16] ipmi: kcs_bmc: Decouple the IPMI chardev from the core Andrew Jeffery
2021-05-21 7:19 ` Zev Weiss
2021-05-10 5:42 ` [PATCH v3 09/16] ipmi: kcs_bmc: Allow clients to control KCS IRQ state Andrew Jeffery
2021-05-21 7:19 ` Zev Weiss
2021-05-10 5:42 ` [PATCH v3 10/16] ipmi: kcs_bmc: Don't enforce single-open policy in the kernel Andrew Jeffery
2021-05-21 17:30 ` Corey Minyard
2021-05-24 0:39 ` Andrew Jeffery
2021-05-10 5:42 ` [PATCH v3 11/16] ipmi: kcs_bmc: Add serio adaptor Andrew Jeffery
2021-05-21 7:20 ` Zev Weiss
2021-06-08 0:37 ` Andrew Jeffery
2021-05-10 5:42 ` [PATCH v3 12/16] dt-bindings: ipmi: Convert ASPEED KCS binding to schema Andrew Jeffery
2021-05-10 5:42 ` [PATCH v3 13/16] dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices Andrew Jeffery
2021-05-10 5:42 ` [PATCH v3 14/16] ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration Andrew Jeffery
2021-05-21 7:21 ` Zev Weiss
2021-06-08 0:41 ` Andrew Jeffery
2021-06-08 0:55 ` Andrew Jeffery
2021-05-10 5:42 ` [PATCH v3 15/16] ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet Andrew Jeffery
2021-05-10 5:42 ` [PATCH v3 16/16] ipmi: kcs_bmc_aspeed: Optionally apply status address Andrew Jeffery
2021-05-20 6:51 ` [PATCH v3 00/16] ipmi: Allow raw access to KCS devices Andrew Jeffery
2021-05-20 13:33 ` Corey Minyard
2021-05-21 17:36 ` Corey Minyard
2021-05-24 0:36 ` Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YKde0k1UCZacJFc6@packtop \
--to=zweiss@equinix.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).