[PATCH v3 1/3] firmware: Add boot information to sysfs

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Fri, Feb 04, 2022 at 05:52:32PM +1030, Joel Stanley wrote:
> Machines often have firmware that perform some action before Linux is
> loaded. It's useful to know how this firmware is configured, so create a
> sysfs directory and some properties that a system can choose to expose
> to describe how the system was started.
> 
> Currently the intended use describes four files, relating to hardware
> root of trust configuration.
> 
> These properties are populated by platform code at startup. Using fixed
> values is suitable as the state that the system booted in will not
> change after firmware has handed over.
> 
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
> v2:
>  - Rewrite so properties are present in common code and are exposed based
>    on the is_visible callback.
>  - Use sysfs_emit
> v3:
>  - drop uart_boot
>  - Add kerneldoc to header
>  - Rename en -> present
>  - Rename val -> value
>  - Drop unncessary __init from header
>  - Wrap macro in do { } while(0)
> ---
>  .../ABI/testing/sysfs-firmware-bootinfo       | 37 +++++++++
>  drivers/base/firmware.c                       | 80 +++++++++++++++++++
>  include/linux/firmware_bootinfo.h             | 48 +++++++++++
>  3 files changed, 165 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-firmware-bootinfo
>  create mode 100644 include/linux/firmware_bootinfo.h
> 
> diff --git a/Documentation/ABI/testing/sysfs-firmware-bootinfo b/Documentation/ABI/testing/sysfs-firmware-bootinfo
> new file mode 100644
> index 000000000000..cd8eeaa49a00
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-firmware-bootinfo
> @@ -0,0 +1,37 @@
> +What:		/sys/firmware/bootinfo/*
> +Date:		Jan 2022

It isn't January anymore :)

> +Description:
> +		A system can expose information about how it was started in
> +		this directory.

I do not understand what you mean by "how it was started".

> +		This information is agnostic as to the firmware implementation.

How?  This should be very firmware specific.

> +
> +		A system may expose a subset of these properties as applicable.
> +
> +
> +What:		/sys/firmware/bootinfo/secure_boot
> +Date:		Jan 2022
> +Description:
> +		Indicates the system was started with secure boot enabled in
> +		the firmware.

What are the valid values of this file?

If this file is not present what does that mean?

> +
> +
> +What:		/sys/firmware/bootinfo/abr_image
> +Date:		Jan 2022
> +Description:
> +		Indicates the system was started from the alternate image
> +		loaded from an Alternate Boot Region. Often this is a result of
> +		the primary firmware image failing to start the system.

What are the valid values here?


> +
> +
> +What:		/sys/firmware/bootinfo/low_security_key
> +Date:		Jan 2022
> +Description:
> +		Indicates the system's secure boot was verified with a low
> +		security or development key.

What is a "low security" key?  What is a "development key"?  What are
the valid values here?

> +
> +What:		/sys/firmware/bootinfo/otp_protected
> +Date:		Jan 2022
> +Description:
> +		Indicates the system's boot configuration region is write
> +		protected and cannot be modified.

What are the valid values here?


> diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c
> index 8dff940e0db9..8d1a7a36784c 100644
> --- a/drivers/base/firmware.c
> +++ b/drivers/base/firmware.c
> @@ -11,6 +11,7 @@
>  #include <linux/module.h>
>  #include <linux/init.h>
>  #include <linux/device.h>
> +#include <linux/firmware_bootinfo.h>
>  
>  #include "base.h"
>  
> @@ -24,3 +25,82 @@ int __init firmware_init(void)
>  		return -ENOMEM;
>  	return 0;
>  }
> +
> +/*
> + * Exposes attributes documented in Documentation/ABI/testing/sysfs-firmware-bootinfo
> + */
> +static struct bootinfo bootinfo;
> +
> +static ssize_t abr_image_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> +	return sysfs_emit(buf, "%d\n", bootinfo.abr_image.value);
> +}
> +static DEVICE_ATTR_RO(abr_image);
> +
> +static ssize_t low_security_key_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> +	return sysfs_emit(buf, "%d\n", bootinfo.low_security_key.value);
> +}
> +static DEVICE_ATTR_RO(low_security_key);
> +
> +static ssize_t otp_protected_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> +	return sysfs_emit(buf, "%d\n", bootinfo.otp_protected.value);
> +}
> +static DEVICE_ATTR_RO(otp_protected);
> +
> +static ssize_t secure_boot_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> +	return sysfs_emit(buf, "%d\n", bootinfo.secure_boot.value);
> +}
> +static DEVICE_ATTR_RO(secure_boot);
> +
> +#define ATTR_ENABLED(a) ((attr == &dev_attr_##a.attr) && bootinfo.a.present)
> +
> +static umode_t bootinfo_attr_mode(struct kobject *kobj, struct attribute *attr, int index)
> +{
> +	if (ATTR_ENABLED(abr_image))
> +		return 0444;
> +
> +	if (ATTR_ENABLED(otp_protected))
> +		return 0444;
> +
> +	if (ATTR_ENABLED(low_security_key))
> +		return 0444;
> +
> +	if (ATTR_ENABLED(otp_protected))
> +		return 0444;
> +
> +	if (ATTR_ENABLED(low_security_key))
> +		return 0444;
> +
> +	if (ATTR_ENABLED(secure_boot))
> +		return 0444;
> +
> +	return 0;
> +}
> +
> +static struct attribute *bootinfo_attrs[] = {
> +	&dev_attr_abr_image.attr,
> +	&dev_attr_low_security_key.attr,
> +	&dev_attr_otp_protected.attr,
> +	&dev_attr_secure_boot.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group bootinfo_attr_group = {
> +	.attrs = bootinfo_attrs,
> +	.is_visible = bootinfo_attr_mode,
> +};
> +
> +int __init firmware_bootinfo_init(struct bootinfo *bootinfo_init)
> +{
> +	struct kobject *kobj = kobject_create_and_add("bootinfo", firmware_kobj);
> +	if (!kobj)
> +		return -ENOMEM;
> +
> +	memcpy(&bootinfo, bootinfo_init, sizeof(bootinfo));
> +
> +	return sysfs_create_group(kobj, &bootinfo_attr_group);

If creating the group fails, shouldn't you remove the kobject?

thanks,

greg k-h