* [PATCH v3 2/2] ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC
2025-10-01 8:47 [PATCH v3 0/2] Add Meta (Facebook) Yosemite5 BMC (AST2600) Kevin Tung
2025-10-01 8:47 ` [PATCH v3 1/2] dt-bindings: arm: aspeed: add Meta Yosemite5 board Kevin Tung
@ 2025-10-01 8:47 ` Kevin Tung
2025-10-17 5:07 ` [PATCH v3 0/2] Add Meta (Facebook) Yosemite5 BMC (AST2600) Andrew Jeffery
2 siblings, 0 replies; 8+ messages in thread
From: Kevin Tung @ 2025-10-01 8:47 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, Geert Uytterhoeven, Magnus Damm
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
linux-renesas-soc, Amithash Prasasd, Kevin Tung, Ken Chen,
Leo Yang, Kevin Tung
Add device tree for the Meta (Facebook) Yosemite5 compute node,
based on the AST2600 BMC.
The Yosemite5 platform provides monitoring of voltages, power,
temperatures, and other critical parameters across the motherboard,
CXL board, E1.S expansion board, and NIC components. The BMC also
logs relevant events and performs appropriate system actions in
response to abnormal conditions.
Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-facebook-yosemite5.dts | 1067 ++++++++++++++++++++
2 files changed, 1068 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index aba7451ab749f4938aa56ffe332a94e04a55eb52..8842825acb5b509b51152af513671d038e369254 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
aspeed-bmc-facebook-yosemite4.dtb \
+ aspeed-bmc-facebook-yosemite5.dtb \
aspeed-bmc-ibm-blueridge.dtb \
aspeed-bmc-ibm-bonnell.dtb \
aspeed-bmc-ibm-everest.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
new file mode 100644
index 0000000000000000000000000000000000000000..2486981f3d6bd36f3fe780b21e834b85242f8aa9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts
@@ -0,0 +1,1067 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Yosemite 5 BMC";
+ compatible = "facebook,yosemite5-bmc", "aspeed,ast2600";
+
+ aliases {
+ i2c16 = &i2c5mux0ch0;
+ i2c17 = &i2c5mux0ch1;
+ i2c18 = &i2c5mux0ch2;
+ i2c19 = &i2c5mux0ch3;
+ i2c20 = &i2c5mux1ch0;
+ i2c21 = &i2c5mux1ch1;
+ i2c22 = &i2c5mux1ch2;
+ i2c23 = &i2c5mux1ch3;
+ i2c24 = &i2c6mux0ch0;
+ i2c25 = &i2c6mux0ch1;
+ i2c26 = &i2c6mux0ch2;
+ i2c27 = &i2c6mux0ch3;
+ i2c28 = &i2c8mux0ch0;
+ i2c29 = &i2c8mux0ch1;
+ i2c30 = &i2c8mux0ch2;
+ i2c31 = &i2c8mux0ch3;
+ i2c32 = &i2c30mux0ch0;
+ i2c33 = &i2c30mux0ch1;
+ i2c34 = &i2c30mux0ch2;
+ i2c35 = &i2c30mux0ch3;
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "power_blue";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ spi_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+ status = "okay";
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&adc0 {
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default>;
+ status = "okay";
+};
+
+&adc1 {
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","","BMC_I2C1_FPGA_ALERT","BMC_READY",
+ "IOEXP_INT_3V3","FM_ID_LED","","",
+ /*C0-C7*/ "","","","",
+ "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N","","BMC_I2C_SSIF_ALERT",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "FM_BMC_MUX1_SEL","","","",
+ "","","FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","FLASH_WP_STATUS","BMC_JTAG_MUX_SEL","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP","SCM_HPM_STBY_RST_N",
+ "SCM_HPM_STBY_EN","STBY_POWER_PG_3V3","TH500_SHDN_OK","","",
+ /*N0-N7*/ "led-postcode-0","led-postcode-1","led-postcode-2",
+ "led-postcode-3","led-postcode-4","led-postcode-5",
+ "led-postcode-6","led-postcode-7",
+ /*O0-O7*/ "RUN_POWER_PG","PWR_BRAKE","CHASSIS_AC_LOSS","BSM_PRSNT_N",
+ "PSU_SMB_ALERT","FM_TPM_PRSNT_0_N","PSU_FW_UPDATING_N","",
+ /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT","ID_RST_BTN_BMC_N",
+ "RST_BMC_RSTBTN_OUT_N","BMC_PWR_LED","RUN_POWER_EN","SHDN_FORCE","",
+ /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_LV3_N","USB_OC0_REAR_N","UART_MUX_SEL",
+ "I2C_MUX_RESET","RSVD_NV_PLT_DETECT","SPI_TPM_INT",
+ "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT",
+ /*R0-R7*/ "THERM_BB_WARN","SPI_BMC_FPGA_INT","CPU_BOOT_DONE","PMBUS_GNT",
+ "CHASSIS_PWR_BRK","PCIE_WAKE","PDB_THERM_OVERT","SHDN_REQ",
+ /*S0-S7*/ "","","SYS_BMC_PWRBTN_N","FM_TPM_PRSNT_1_N",
+ "FM_BMC_DEBUG_SW_N","UID_LED_N","SYS_FAULT_LED_N","RUN_POWER_FAULT",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "FM_DBP_BMC_PRDY_N","","","","","","","",
+ /*V0-V7*/ "L2_RST_REQ_OUT","L0L1_RST_REQ_OUT","BMC_ID_BEEP_SEL",
+ "BMC_I2C0_FPGA_ALERT","SMB_BMC_TMP_ALERT","PWR_LED_N",
+ "SYS_RST_OUT","IRQ_TPM_SPI_N",
+ /*W0-W7*/ "","","","","","","IRQ_ESPI_LPC_SERIRQ_ALERT0_N","",
+ /*X0-X7*/ "","FM_DBP_CPU_PREQ_GF_N","","","","","","",
+ /*Y0-Y7*/ "","","FM_FLASH_LATCH_N","BMC_EMMC_RST_N","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "","","","","","","","",
+ /*18B0-18B7*/ "","","","","FM_BOARD_BMC_REV_ID0",
+ "FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+ /*18C0-18C7*/ "","","SPI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_N","","";
+};
+
+/* MB CPLD I2C */
+&i2c0 {
+ status = "okay";
+};
+
+/* CPU I2C */
+&i2c1 {
+ status = "okay";
+};
+
+/* MCIO 2A I2C */
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* Socket 0 SBRMI */
+ sbrmi@3c {
+ compatible = "amd,sbrmi";
+ reg = <0x3c>;
+ };
+
+ /* Socket 0 SBTSI */
+ sbtsi@4c {
+ compatible = "amd,sbtsi";
+ reg = <0x4c>;
+ };
+};
+
+&i2c4 {
+ multi-master;
+ mctp-controller;
+ status = "okay";
+
+ mctp@10 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+
+ /* OCP NIC TEMP */
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ /* OCP NIC FRU EEPROM */
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ /* I2C MUX for MCIO 1A */
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ /* I2C MUX for MCIO 0A */
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux1ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux1ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux1ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c5mux1ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ /* I2C MUX for PWRPIC #13 ~ #16 */
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ /* PWRPIC #13 */
+ i2c6mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* PWRPIC #14 */
+ i2c6mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* PWRPIC #16 */
+ i2c6mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* PWRPIC #15 */
+ i2c6mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+/* SCM CPLD I2C */
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ power-monitor@14 {
+ compatible = "infineon,xdp710";
+ reg = <0x14>;
+ };
+
+ adc@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ power-sensor@40 {
+ compatible = "ti,ina238";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ /* PADDLE BD IOEXP */
+ gpio-expander@41 {
+ compatible = "nxp,pca9536";
+ reg = <0x41>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "HSC_OC_GPIO0", "HSC_OC_GPIO1",
+ "HSC_OC_GPIO2", "HSC_OC_GPIO3";
+ };
+
+ power-sensor@42 {
+ compatible = "ti,ina238";
+ reg = <0x42>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@43 {
+ compatible = "lltc,ltc4287";
+ reg = <0x43>;
+ shunt-resistor-micro-ohms = <250>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina238";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina238";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ power-monitor@47 {
+ compatible = "ti,tps25990";
+ reg = <0x47>;
+ ti,rimon-micro-ohms = <430000000>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ };
+
+ /* PDB FRU */
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+
+ /* Paddle BD FRU */
+ eeprom@57 {
+ compatible = "atmel,24c128";
+ reg = <0x57>;
+ };
+
+ power-monitor@58 {
+ compatible = "renesas,isl28022";
+ reg = <0x58>;
+ shunt-resistor-micro-ohms = <1000>;
+ };
+
+ power-monitor@59 {
+ compatible = "renesas,isl28022";
+ reg = <0x59>;
+ shunt-resistor-micro-ohms = <1000>;
+ };
+
+ power-monitor@5a {
+ compatible = "renesas,isl28022";
+ reg = <0x5a>;
+ shunt-resistor-micro-ohms = <1000>;
+ };
+
+ power-monitor@5b {
+ compatible = "renesas,isl28022";
+ reg = <0x5b>;
+ shunt-resistor-micro-ohms = <1000>;
+ };
+
+ psu@5c {
+ compatible = "renesas,raa228006";
+ reg = <0x5c>;
+ };
+
+ fan-controller@5e{
+ compatible = "maxim,max31790";
+ reg = <0x5e>;
+ };
+
+ /* I2C MUX for PWRPIC #1, #2, #11, #12 */
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ /* PWRPIC #1 */
+ i2c8mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* PWRPIC #2 */
+ i2c8mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* PWRPIC #12 (Connector to CXL BD) */
+ i2c8mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c30mux0ch0: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c30mux0ch1: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c30mux0ch2: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@1e {
+ compatible = "ti,adc128d818";
+ reg = <0x1e>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ adc@1f {
+ compatible = "ti,adc128d818";
+ reg = <0x1f>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ /* CXL BD IOEXP */
+ gpio-expander@27 {
+ compatible = "nxp,pca9535";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "IRQ_TEMP_0_ALERT_N","IRQ_TEMP_1_ALERT_N",
+ "ALERT_PMBUS_0_N","ALERT_PMBUS_1_N",
+ "ALERT_PMBUS_2_N","IRQ_INA230_12V_ALERT_N",
+ "RST_IOX_CXL_N","DEBUG_UART_SEL_0",
+ "DEBUG_UART_SEL_1","BMC_REMOTEJTAG_EN_N",
+ "JTAG_BMC_3V3_CTL_CLR_N","DDR_CH02_I2C_MUX_SEL",
+ "DDR_CH13_I2C_MUX_SEL","SYS_OK",
+ "CXL_VRHOT_ALERT_R1_N","";
+ };
+
+ temperature-sensor@4a {
+ compatible = "ti,tmp75";
+ reg = <0x4a>;
+ };
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp432";
+ reg = <0x4c>;
+ };
+
+ power-sensor@4d {
+ compatible = "ti,ina230";
+ reg = <0x4d>;
+ shunt-resistor = <2000>;
+ };
+
+ temperature-sensor@4e {
+ compatible = "ti,tmp75";
+ reg = <0x4e>;
+ };
+
+ /* CXL FRU */
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c30mux0ch3: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ /* PWRPIC #11 */
+ i2c8mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ /* SCM FRU */
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ /* BSM FRU */
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+/* MCIO 0A I2C */
+&i2c10 {
+ status = "okay";
+
+ /* E1S EB IOEXP0 */
+ gpio-expander@21 {
+ compatible = "nxp,pca9535";
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <172 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "RST_SMB_E1S_0","LED_ACTIVE_E1S_0",
+ "E1S_0_PRSNT_N","RST_PCIE_E1S_0_PERST",
+ "E1S_0_PWRDIS","ALERT_INA_0",
+ "","",
+ "RST_SMB_E1S_1","LED_ACTIVE_E1S_1",
+ "E1S_1_PRSNT_N","RST_PCIE_E1S_1_PERST",
+ "E1S_1_PWRDIS","ALERT_INA_1",
+ "","";
+ };
+
+ /* E1S EB IOEXP1 */
+ gpio-expander@22 {
+ compatible = "nxp,pca9535";
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <174 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "P12V_E1S_EN_0","PWRGD_P12V_E1S_0",
+ "P12V_E1S_FLTB_0","PWRGD_P3V3_E1S_0",
+ "FM_P3V3_E1S_0_FAULT","P12V_E1S_EN_1",
+ "PWRGD_P12V_E1S_1","P12V_E1S_FLTB_1",
+ "PWRGD_P3V3_E1S_1","FM_P3V3_E1S_1_FAULT",
+ "","",
+ "","",
+ "PWRGD_P3V3_AUX","ALERT_TEMP";
+ };
+
+ power-sensor@40 {
+ compatible = "ti,ina233";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ ti,maximum-expected-current-microamp = <32768000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina233";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ ti,maximum-expected-current-microamp = <32768000>;
+ };
+
+ adc@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ };
+
+ /* E1S EB FRU */
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ /* MB IOEXP */
+ gpio-expander@21 {
+ compatible = "nxp,pca9535";
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <170 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "ALERT_CLKMUX_0_LOSS_N","ALERT_CLKMUX_1_LOSS_N",
+ "ALERT_CLKMUX_2_LOSS_N","ALERT_CLKMUX_3_LOSS_N",
+ "FM_CLKMUX_0_SEL","FM_CLKMUX_1_SEL",
+ "FM_CLKMUX_2_SEL","FM_CLKMUX_3_SEL",
+ "RST_USB_HUB_0_N","FM_CLKGEN_GPIO2",
+ "","FM_BMC_RTC_RST",
+ "FM_P3V_BAT_SCALED_EN","",
+ "FM_CLKGEN_GPIO4","RST_USB_HUB_1_N";
+ };
+
+ power-sensor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@42 {
+ compatible = "ti,ina230";
+ reg = <0x42>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@43 {
+ compatible = "ti,ina230";
+ reg = <0x43>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
+
+ adc@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+
+ adc@49 {
+ compatible = "ti,ads7830";
+ reg = <0x49>;
+ };
+
+ adc@4b {
+ compatible = "ti,ads7830";
+ reg = <0x4b>;
+ };
+};
+
+/* MCIO 4A I2C */
+&i2c12 {
+ multi-master;
+ mctp-controller;
+ status = "okay";
+
+ mctp@10 {
+ compatible = "mctp-i2c-controller";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ power-sensor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-sensor@45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "national,lm75b";
+ reg = <0x48>;
+ };
+
+ temperature-sensor@49 {
+ compatible = "national,lm75b";
+ reg = <0x49>;
+ };
+
+ /* CLKGEN FRU */
+ eeprom@50 {
+ compatible = "atmel,24c16";
+ reg = <0x50>;
+ };
+
+ /* MB FRU */
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ /* CPU FRU */
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+/* PROT reserve */
+&i2c14 {
+ status = "okay";
+};
+
+/* MCIO 3A I2C */
+&i2c15 {
+ status = "okay";
+};
+
+&kcs2 {
+ aspeed,lpc-io-reg = <0xca8>;
+ status = "okay";
+};
+
+&kcs3 {
+ aspeed,lpc-io-reg = <0xca2>;
+ status = "okay";
+};
+
+&mac2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi3_default>;
+ use-ncsi;
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl_ncsi3_default: ncsi3_default {
+ function = "RMII3";
+ groups = "NCSI3";
+ };
+};
+
+&sgpiom0 {
+ ngpios = <128>;
+ bus-frequency = <2000000>;
+ gpio-line-names =
+ /*"input pin","output pin"*/
+ /*bit0-bit7*/
+ "PWRGD_CPU_PWROK","SGPIO_RSTBTN_OUT",
+ "PWRGD_CPU_PWROK_1","SGPIO_BMC_READY",
+ "PWRGD_CPU_PWROK_2","IBB_BMC_SRST",
+ "host0-ready","FM_I3C_SPD_AH_SEL_R",
+ "PCIe_HP_BOOT","FM_I3C_SPD_IP_SEL_R",
+ "PCIe_HP_DATA","FM_JTAG_BMC_MUX_S0_R",
+ "PCIe_HP_NIC","FM_JTAG_BMC_MUX_S1_R",
+ "","FM_JTAG_BMC_OE_1_R_N",
+ /*bit8-bit15*/
+ "PWRGD_PVDDCR_CPU0_P0","FM_JTAG_BMC_OE_R_N",
+ "PWRGD_PVDDCR_SOC_P0","FM_REMOTEJTAG_EN_R_N",
+ "PWRGD_PVDDCR_CPU1_P0","FM_CPU_FORCE_SELFREFRESH_R",
+ "PWRGD_P3V3_STBY","FM_CPU_NMI_SYNC_FLOOD_R_N",
+ "PWRGD_PVDD33_S5","FM_CPU_TRIGGERTSC_OE_R_N",
+ "PWRGD_PVDD18_S5_P0","FM_PASSWORD_CLEAR_R_N",
+ "PWRGD_PVDDIO_P0","FM_BIOS_USB_RECOVERY_N",
+ "PWRGD_PVDDIO_MEM_S3_P0","FM_USB_MUX_OE_R_N",
+ /*bit16-bit23*/
+ "PWRGD_P1V8_STBY","FM_USB_MUX_SEL_R",
+ "PWRGD_P1V0_STBY","RST_SMB_BOOT_R_N",
+ "PWRGD_P1V2_STBY","RST_SMB_MCIO0A_R_N",
+ "IBB_BMC_SRST","RST_SMB_NIC_R_N",
+ "PWRGD_P12V_E1S_0","FM_PPS_NIC_IN_BUF_OE_R_N",
+ "PWRGD_P12V_E1S_1","FM_PPS_NIC_IN_EN_R",
+ "RST_PCIE_BOOT_PERST_N","FM_PPS_NIC_IN_OE_R_N",
+ "PWRGD_P12V_NIC","FM_PPS_NIC_IN_S0_R",
+ /*bit24-bit31*/
+ "PWRGD_P12V_SCM","FM_PPS_NIC_IN_S1_R",
+ "PWRGD_P12V_DIMM","FM_PPS_NIC_OUT_BUF_OE_R_N",
+ "PWRGD_CPU_DIMM0_AH","FM_PPS_NIC_OUT_CPU_OE_R_N",
+ "PWRGD_CPU_DIMM1_IP","FM_PPS_NIC_OUT_EN_R",
+ "PWRGD_NIC_CPLD","JTAG_CPLD_DBREQ_R_N",
+ "ALERT_INA230_DIMM_0_N","HDT_HDR_RESET_R_N",
+ "ALERT_INA230_DIMM_1_N","FM_SMB_AUTH_MUX_OE_R_N",
+ "ALERT_INA230_E1S_0_N","FM_SCM_LED_R_N",
+ /*bit32-bit39*/
+ "ALERT_INA230_E1S_1_N","",
+ "ALERT_INA230_FAN0_N","",
+ "ALERT_INA230_FAN1_N","",
+ "ALERT_INA230_FAN2_N","",
+ "ALERT_INA230_FAN3_N","",
+ "ALERT_INA230_NIC_N","",
+ "ALERT_INA230_SCM_N","",
+ "ALERT_IRQ_PMBUS_PWR11_N","",
+ /*bit40-bit47*/
+ "ALERT_MCIO2A_LEAK_DETECT_N","",
+ "ALERT_MCIO3A_LEAK_DETECT_N","",
+ "ALERT_MCIO4A_LEAK_DETECT_N","",
+ "ALERT_OC_PADDLE2_N","",
+ "ALERT_OC_PWR2_N","",
+ "ALERT_OC_PWR11_N","",
+ "ALERT_PADDLE2_SMB_N","",
+ "ALERT_PWR14_SB2_LEAK_DETECT_N","",
+ /*bit48-bit55*/
+ "ALERT_PWR14_SB3_LEAK_DETECT_N","",
+ "ALERT_PWR15_SB2_LEAK_DETECT_N","",
+ "ALERT_PWR15_SB3_LEAK_DETECT_N","",
+ "ALERT_SMB_MCIO0A_N","",
+ "ALERT_SMB_MCIO1A_N","",
+ "ALERT_SMB_MCIO2A_N","",
+ "ALERT_SMB_MCIO2B_N","",
+ "ALERT_SMB_MCIO3A_N","",
+ /*bit56-bit63*/
+ "ALERT_SMB_MCIO3B_N","",
+ "ALERT_SMB_MCIO4A_N","",
+ "ALERT_SMB_MCIO4B_N","",
+ "ALERT_THERMALTRIP_MCIO1A_N","",
+ "ALERT_THERMALTRIP_MCIO2A_N","",
+ "ALERT_THERMALTRIP_MCIO3A_N","",
+ "ALERT_THERMALTRIP_MCIO4A_N","",
+ "ALERT_UV_PADDLE2_N","",
+ /*bit64-bit71*/
+ "ALERT_UV_PWR2_N","",
+ "ALERT_UV_PWR11_N","",
+ "ALERT_VR_SMB_N","",
+ "FAULT_FAN_0_N","",
+ "FAULT_FAN_1_N","",
+ "FAULT_FAN_2_N","",
+ "FAULT_FAN_3_N","",
+ "FAULT_P3V3_E1S_0_N","",
+ /*bit72-bit79*/
+ "FAULT_P3V3_E1S_1_N","",
+ "FAULT_P3V3_NIC_N","",
+ "FAULT_P12V_NIC_N","",
+ "FAULT_P12V_SCM_N","",
+ "P0_I3C_APML_ALERT_L","",
+ "ALERT_INLET_TEMP_N","",
+ "FM_CPU_PROCHOT_R_N","",
+ "FM_CPU_THERMTRIP_N","",
+ /*bit80-bit87*/
+ "ALERT_OUTLET_TEMP_N","",
+ "ALERT_RTC_N","",
+ "PVDDCR_CPU0_P0_OCP_N","",
+ "PVDDCR_CPU1_P0_OCP_N","",
+ "PVDDCR_SOC_P0_OCP_N","",
+ "MB_IOEXP_INT","",
+ "E1S_0_BD_IOEXP","",
+ "E1S_1_BD_IOEXP","",
+ /*bit88-bit95*/
+ "PADDLE_BD_IOEXP_INT","",
+ "FM_BOARD_REV_ID0","",
+ "FM_BOARD_REV_ID1","",
+ "FM_BOARD_REV_ID2","",
+ "FM_VR_TYPE_ID0","",
+ "FM_VR_TYPE_ID1","",
+ "PRSNT_BOOT_N_IOEXP","",
+ "PRSNT_DATA_N_IOEXP","",
+ /*bit96-bit103*/
+ "PRSNT_NIC_N_IOEXP","",
+ "PRSNT_BOOT_N_FF","",
+ "PRSNT_MCIO1A_N_FF","",
+ "NIC_PRSNT_N","",
+ "","",
+ "","",
+ "","",
+ "","",
+ /*bit104-bit111*/
+ "","","","","","","","","","","","","","","","",
+ /*bit112-bit119*/
+ "","","","","","","","","","","","","","","","",
+ /*bit120-bit127*/
+ "","","","","","","","","","","","","","","","";
+ status = "okay";
+};
+
+/* BIOS Flash */
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
+ status = "okay";
+
+ flash@0 {
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <12000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ status = "okay";
+ };
+};
+
+/* Host Console */
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+/* SOL */
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+/* BMC Console */
+&uart5 {
+ status = "okay";
+};
+
+&wdt1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+ status = "okay";
+};
--
2.51.0
^ permalink raw reply related [flat|nested] 8+ messages in thread