* [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC
[not found] <20250513031010.267994-1-LeoWang>
@ 2025-05-13 3:10 ` leo.jt.wang
2025-05-13 7:44 ` Krzysztof Kozlowski
` (4 more replies)
0 siblings, 5 replies; 11+ messages in thread
From: leo.jt.wang @ 2025-05-13 3:10 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
george.kw.lee, leo.jt.wang
From: Leo Wang <leo.jt.wang@fii-foxconn.com>
Add linux device tree entry for Meta Clemente compute-tray
BMC using AST2600 SoC.
Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-facebook-clemente.dts | 1269 +++++++++++++++++
2 files changed, 1270 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index b3170fdd3096..9d0a465cbb36 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
aspeed-bmc-facebook-catalina.dtb \
+ aspeed-bmc-facebook-clemente.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-elbert.dtb \
aspeed-bmc-facebook-fuji.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 000000000000..0313150841e1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1269 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Clemente BMC";
+ compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ i2c16 = &i2c1mux0ch0;
+ i2c17 = &i2c1mux0ch1;
+ i2c18 = &i2c1mux0ch2;
+ i2c19 = &i2c1mux0ch3;
+ i2c20 = &i2c1mux0ch4;
+ i2c21 = &i2c1mux0ch5;
+ i2c22 = &i2c1mux0ch6;
+ i2c23 = &i2c1mux0ch7;
+ i2c24 = &i2c0mux0ch0;
+ i2c25 = &i2c0mux0ch1;
+ i2c26 = &i2c0mux0ch2;
+ i2c27 = &i2c0mux0ch3;
+ i2c28 = &i2c0mux1ch0;
+ i2c29 = &i2c0mux1ch1;
+ i2c30 = &i2c0mux1ch2;
+ i2c31 = &i2c0mux1ch3;
+ i2c32 = &i2c0mux2ch0;
+ i2c33 = &i2c0mux2ch1;
+ i2c34 = &i2c0mux2ch2;
+ i2c35 = &i2c0mux2ch3;
+ i2c36 = &i2c0mux3ch0;
+ i2c37 = &i2c0mux3ch1;
+ i2c38 = &i2c0mux3ch2;
+ i2c39 = &i2c0mux3ch3;
+ i2c40 = &i2c0mux4ch0;
+ i2c41 = &i2c0mux4ch1;
+ i2c42 = &i2c0mux4ch2;
+ i2c43 = &i2c0mux4ch3;
+ i2c44 = &i2c0mux5ch0;
+ i2c45 = &i2c0mux5ch1;
+ i2c46 = &i2c0mux5ch2;
+ i2c47 = &i2c0mux5ch3;
+ i2c48 = &i2c5mux0ch0;
+ i2c49 = &i2c5mux0ch1;
+ i2c50 = &i2c5mux0ch2;
+ i2c51 = &i2c5mux0ch3;
+ i2c52 = &i2c5mux0ch4;
+ i2c53 = &i2c5mux0ch5;
+ i2c54 = &i2c5mux0ch6;
+ i2c55 = &i2c5mux0ch7;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ spi1_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "bmc_ready_noled";
+ gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+
+ led-3 {
+ label = "bmc_ready_cpld_noled";
+ gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+ };
+
+ p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p2v5_bmc_aux";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>;
+ };
+ };
+
+};
+
+&udma {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ compatible = "aspeed,ast2600-uart";
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mac0 {
+ status = "disabled";
+ /* phy-mode = "rgmii-rxid"; */
+ phy-handle = <ðphy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi3_default>;
+ use-ncsi;
+ ncsi-ctrl,start-redo-probe;
+ ncsi-package = <1>;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi4_default>;
+ use-ncsi;
+ ncsi-ctrl,start-redo-probe;
+ ncsi-package = <2>;
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // IOB0 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // IOB0 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux1ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux1ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 0 IOEXP
+ io_expander7: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux1ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux1ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@73 {
+ compatible = "nxp,pca9546";
+ reg = <0x73>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux2ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux2ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux2ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux2ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9546";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux3ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // IOB1 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux3ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux3ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // IOB1 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux3ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9546";
+ reg = <0x76>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux4ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux4ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 1 IOEXP
+ io_expander8: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux4ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux4ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux5ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux5ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux5ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux5ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ // HSC
+ power-monitor@12 {
+ compatible = "ti,lm5066i";
+ reg = <0x12>;
+ };
+
+ // HSC
+ power-monitor@14 {
+ compatible = "ti,lm5066i";
+ reg = <0x14>;
+ };
+
+ // HSC TEMP SENSOR
+ temperature-sensor@4a {
+ compatible = "ti,tmp461";
+ reg = <0x4a>;
+ };
+
+ // HSC FRU EEPROM
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+
+ // CPU0 Leak sensor MAX1363
+ Leak-sensor@34 {
+ compatible = "maxim,max1363";
+ reg = <0x34>;
+ };
+
+ // CPU1 Leak sensor MAX1363
+ Leak-sensor@35 {
+ compatible = "maxim,max1363";
+ reg = <0x35>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ power-sensor@22 {
+ compatible = "mps,mp5990";
+ reg = <0x22>;
+ };
+ };
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ i2c1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ fanctl0: fan-controller@21{
+ compatible = "maxim,max31790";
+ reg = <0x21>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@2 {
+ reg = <2>;
+ sensor-type = "TACH";
+ };
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
+ };
+ fanctl1: fan-controller@27{
+ compatible = "maxim,max31790";
+ reg = <0x27>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@2 {
+ reg = <2>;
+ sensor-type = "TACH";
+ };
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
+ };
+ };
+ i2c1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ };
+ i2c1mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ i2c1mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ // PDB FRU EEPROM
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
+ // PDB TEMP SENSOR
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+ };
+ i2c1mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+
+ // PDB IOEXP
+ io_expander5: gpio@27 {
+ compatible = "nxp,pca9554";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP IOEXP
+ io_expander6: gpio@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ i2c1mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+
+ // FIO FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ // FIO TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ // Module 0, Expander @0x20
+ io_expander0: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // Module 1, Expander @0x21
+ io_expander1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // HMC Expander @0x27
+ io_expander2: gpio@27 {
+ compatible = "nxp,pca9555";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // HMC Expander @0x74
+ io_expander3: gpio@74 {
+ compatible = "nxp,pca9555";
+ reg = <0x74>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // Module 0 Aux EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // Module 1 Aux EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ rtc@6f {
+ compatible = "nuvoton,nct3018y";
+ reg = <0x6f>;
+ };
+
+ // Interposer board EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ bus-frequency = <100000>;
+ multi-master;
+ aspeed,hw-timeout-ms = <1000>;
+
+ //USB Debug Connector
+ ipmb@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+
+ // SCM CPLD IOEXP
+ io_expander4: gpio@4f {
+ compatible = "nxp,pca9555";
+ reg = <0x4f>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // SCM TEMP SENSOR BOARD
+ temperature-sensor@4b {
+ compatible = "national,lm75b";
+ reg = <0x4b>;
+ };
+
+ // SCM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // BSM FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ // OCP NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ alert-gpios = <&gpio0 ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ timeout-ms = <5000>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ multi-master;
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c5mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c5mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c5mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ i2c5mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ i2c5mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ i2c5mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ // HDD FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+ };
+ i2c5mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ power-sensor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@49 {
+ compatible = "ti,ina230";
+ reg = <0x49>;
+ shunt-resistor = <2000>;
+ };
+ };
+ };
+};
+
+&i2c13 {
+ status = "okay";
+ multi-master;
+
+ // HPM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ // CBC 0 FRU
+ eeprom@54 {
+ compatible = "atmel,24c02";
+ reg = <0x54>;
+ };
+ // CBC 1 FRU
+ eeprom@55 {
+ compatible = "atmel,24c02";
+ reg = <0x55>;
+ };
+ // CBC 2 FRU
+ eeprom@56 {
+ compatible = "atmel,24c02";
+ reg = <0x56>;
+ };
+ // CBC 3 FRU
+ eeprom@58 {
+ compatible = "atmel,24c02";
+ reg = <0x58>;
+ };
+ // HMC FRU EEPROM
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ // PDB CPLD IOEXP 0x10
+ io_expander9: gpio@10 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x10>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x11
+ io_expander10: gpio@11 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x12
+ io_expander11: gpio@12 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x13
+ io_expander12: gpio@13 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x14
+ io_expander13: gpio@14 {
+ compatible = "nxp,pca9555";
+ reg = <0x14>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ // OCP NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC1 FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+};
+
+&adc0 {
+ vref-supply = <&p1v8_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref-supply = <&p2v5_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&pinctrl {
+ pinctrl_ncsi3_default: ncsi3_default {
+ function = "RMII3";
+ groups = "NCSI3";
+ };
+
+ pinctrl_ncsi4_default: ncsi4_default {
+ function = "RMII4";
+ groups = "NCSI4";
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+ "BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+ "IOEXP_INT_L","FM_ID_LED",
+ "","",
+ /*C0-C7*/ "BMC_GPIOC0","","","",
+ "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+ "","BMC_I2C_SSIF_ALERT_L",
+ /*D0-D7*/ "","","","","BMC_GPIOD4","","","",
+ /*E0-E7*/ "BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","",
+ "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+ /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN",
+ "SHDN_FORCE_L","SHDN_REQ_L",
+ "","","","",
+ /*I0-I7*/ "","","","",
+ "","FLASH_WP_STATUS",
+ "FM_PDB_HEALTH_N","RUN_POWER_PG",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP",
+ "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+ "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+ /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1",
+ "LED_POSTCODE_2","LED_POSTCODE_3",
+ "LED_POSTCODE_4","LED_POSTCODE_5",
+ "LED_POSTCODE_6","LED_POSTCODE_7",
+ /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+ "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+ "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+ "","USBDBG_IPMI_EN_L",
+ /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+ "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+ "host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+ /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+ "UART_MUX_SEL","I2C_MUX_RESET_L",
+ "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+ "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+ /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+ "CPU_BOOT_DONE","PMBUS_GNT_L",
+ "CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+ "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+ /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+ "FM_BMC_DEBUG_SW_N","UID_LED_N",
+ "SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+ "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+ "SMB_BMC_TMP_ALERT","PWR_LED_N",
+ "SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","RST_BMC_SELF_HW",
+ "FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+ "BMC_GPIOY4","BMC_GPIOY5","","",
+ /*Z0-Z7*/ "","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "","","","","","","","",
+ /*18B0-18B3*/ "","","","",
+ /*18B4-18B7*/ "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+ /*18C0-18C7*/ "","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&io_expander0 {
+ gpio-line-names =
+ "FPGA_THERM_OVERT_L-I",
+ "FPGA_READY_BMC-I",
+ "HMC_BMC_DETECT-O",
+ "HMC_PGOOD-O",
+ "",
+ "BMC_STBY_CYCLE-O",
+ "FPGA_EROT_FATAL_ERROR_L-I",
+ "WP_HW_EXT_CTRL_L-O",
+ "EROT_FPGA_RST_L-O",
+ "FPGA_EROT_RECOVERY_L-O",
+ "BMC_EROT_FPGA_SPI_MUX_SEL-O",
+ "USB2_HUB_RST_L-O",
+ "",
+ "SGPIO_EN_L-O",
+ "B2B_IOEXP_INT_L-I",
+ "I2C_BUS_MUX_RESET_L-O";
+};
+
+&io_expander1 {
+ gpio-line-names =
+ "USB_MUX_SEL_N-O",
+ "",
+ "MCIO_PCIE_DISABLE_L-O",
+ "USB_PCIE_DISABLE_L-O",
+ "PEX_SW_PCIE_DISABLE_L-O",
+ "HSC_CARD_PRSNT_N-I",
+ "TPM_MUX_3V3_SEL_OUT_N-O",
+ "USB2_HUB4_RST_L-O",
+ "PCI_MUX_SEL-O",
+ "TPM_MUX_SEL-O",
+ "IOEXP_BMC_PHY_RST_N-O",
+ "IOEXP_RTC_CLR_L-O",
+ "BMC_12V_CTRL-O",
+ "PS_RUN_IO0_PG-I",
+ "",
+ "";
+};
+
+&io_expander2 {
+ gpio-line-names =
+ "HMC_PRSNT_L-I",
+ "HMC_READY-I",
+ "HMC_EROT_FATAL_ERROR_L-I",
+ "I2C_MUX_SEL-O",
+ "HMC_EROT_SPI_MUX_SEL-O",
+ "HMC_EROT_RECOVERY_L-O",
+ "HMC_EROT_RST_L-O",
+ "GLOBAL_WP_HMC-O",
+ "FPGA_RST_L-O",
+ "USB2_HUB_RST-O",
+ "CPU_UART_MUX_SEL-O",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&io_expander3 {
+ gpio-line-names =
+ "IOB_PRSNT_L",
+ "IOB_DP_HPD",
+ "IOX_BMC_RESET",
+ "IOB_IOEXP_INT_L",
+ "IOB_UID_LED_L",
+ "IOB_UID_BTN_L",
+ "IOB_SYS_RST_BTN_L",
+ "IOB_PWR_LED_L",
+ "IOB_PWR_BTN_L",
+ "IOB_PHY_RST",
+ "CPLD_JTAG_MUX_SEL",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&io_expander4 {
+ gpio-line-names =
+ "stby_power_en_cpld","stby_power_gd_cpld","","",
+ "","","","",
+ "","","","",
+ "","","","";
+};
+
+&io_expander5 {
+ gpio-line-names =
+ "JTAG_MUX_SEL","IOX_BMC_RESET","RTC_CLR_L","RTC_U77_ALRT_N",
+ "","PSU_ALERT_N","","RST_P12V_STBY_N";
+};
+
+&io_expander6 {
+ gpio-line-names =
+ "OSFP_PHASE_ID0","OSFP_PHASE_ID1",
+ "OSFP_PHASE_ID2","OSFP_PHASE_ID3",
+ "","","","",
+ "OSFP_BOARD_ID0","OSFP_BOARD_ID1",
+ "OSFP_BOARD_ID2","PWRGD_P3V3_N1",
+ "PWRGD_P3V3_N2","","","";
+};
+
+&io_expander7 {
+ gpio-line-names =
+ "RST_CX7_0","RST_CX7_1",
+ "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+ "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+ "CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+ "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+ "FNP_L_CX0","FNP_L_CX1",
+ "","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
+};
+
+&io_expander8 {
+ gpio-line-names =
+ "SEC_RST_CX7_0","SEC_RST_CX7_1",
+ "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+ "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+ "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+ "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+ "SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+ "","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
+};
+
+&io_expander9 {
+ gpio-line-names =
+ "wSequence_Latch_State_N","wP12V_N1N2_RUNTIME_FLT_N",
+ "wP12V_FAN_RUNTIME_FLT_N","wP12V_AUX_RUNTIME_FLT_N",
+ "wHost_PERST_SEQPWR_FLT_N","wP12V_N1N2_SEQPWR_FLT_N",
+ "wP12V_FAN_SEQPWR_FLT_N","wP12V_AUX_SEQPWR_FLT_N",
+ "wP12V_RUNTIME_FLT_NIC1_N","wAUX_RUNTIME_FLT_NIC1_N",
+ "wP12V_SEQPWR_FLT_NIC1_N","wAUX_SEQPWR_FLT_NIC1_N",
+ "wP12V_RUNTIME_FLT_NIC0_N","wAUX_RUNTIME_FLT_NIC0_N",
+ "wP12V_SEQPWR_FLT_NIC0_N","wAUX_SEQPWR_FLT_NIC0_N";
+};
+
+&io_expander10 {
+ gpio-line-names =
+ "FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
+ "FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
+ "P48V_HS2_FAULT_N_PLD","P48V_HS1_FAULT_N_PLD",
+ "P12V_AUX_FAN_OC_PLD_N","P12V_AUX_FAN_FAULT_PLD_N",
+ "","",
+ "","",
+ "","FM_SYS_THROTTLE_N",
+ "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+ "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+};
+
+&io_expander11 {
+ gpio-line-names =
+ "P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+ "P12V_AUX_NIC1_SENSE_ALERT_R_N","P12V_AUX_NIC0_SENSE_ALERT_R_N",
+ "NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
+ "P12V_AUX_FAN_ALERT_PLD_N","P52V_SENSE_ALERT_PLD_N",
+ "PRSNT_RJ45_FIO_N_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+ "CHASSIS3_LEAK_Q_N_PLD","CHASSIS2_LEAK_Q_N_PLD",
+ "CHASSIS1_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+ "","SMB_RJ45_FIO_TMP_ALERT";
+};
+
+&io_expander12 {
+ gpio-line-names =
+ "FAN_7_PRESENT_N","FAN_6_PRESENT_N",
+ "FAN_5_PRESENT_N","FAN_4_PRESENT_N",
+ "FAN_3_PRESENT_N","FAN_2_PRESENT_N",
+ "FAN_1_PRESENT_N","FAN_0_PRESENT_N",
+ "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+ "PRSNT_HDDBD_POWER_CABLE_N","PRSNT_OSFP0_POWER_CABLE_N",
+ "PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+ "PRSNT_CHASSIS1_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+};
+
+&io_expander13 {
+ gpio-line-names =
+ "rmc_en_dc_pwr_on","",
+ "","",
+ "","",
+ "","",
+ "leak_config_0","leak_config_1",
+ "leak_config_2","leak_config_3",
+ "mfg_led_test_mode_l","small_leak_err_inj",
+ "large_leak_err_inj","";
+};
+
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC
2025-05-13 3:10 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC leo.jt.wang
@ 2025-05-13 7:44 ` Krzysztof Kozlowski
2025-05-13 12:38 ` Andrew Lunn
` (3 subsequent siblings)
4 siblings, 0 replies; 11+ messages in thread
From: Krzysztof Kozlowski @ 2025-05-13 7:44 UTC (permalink / raw)
To: leo.jt.wang, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Joel Stanley, Andrew Jeffery
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
george.kw.lee, leo.jt.wang
On 13/05/2025 05:10, leo.jt.wang@gmail.com wrote:
> From: Leo Wang <leo.jt.wang@fii-foxconn.com>
>
> Add linux device tree entry for Meta Clemente compute-tray
> BMC using AST2600 SoC.
>
> Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
Missing threading.
Missing versioning.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC
2025-05-13 3:10 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC leo.jt.wang
2025-05-13 7:44 ` Krzysztof Kozlowski
@ 2025-05-13 12:38 ` Andrew Lunn
2025-05-14 6:45 ` [PATCH V2 " leo.jt.wang
` (2 subsequent siblings)
4 siblings, 0 replies; 11+ messages in thread
From: Andrew Lunn @ 2025-05-13 12:38 UTC (permalink / raw)
To: leo.jt.wang
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, george.kw.lee, leo.jt.wang
> +&mac0 {
> + status = "disabled";
> + /* phy-mode = "rgmii-rxid"; */
Did i already say this is probably wrong?
Andrew
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH V2 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC
2025-05-13 3:10 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC leo.jt.wang
2025-05-13 7:44 ` Krzysztof Kozlowski
2025-05-13 12:38 ` Andrew Lunn
@ 2025-05-14 6:45 ` leo.jt.wang
2025-05-14 13:11 ` [PATCH " Rob Herring (Arm)
2025-05-26 10:01 ` [PATCH V3 " leo.jt.wang
4 siblings, 0 replies; 11+ messages in thread
From: leo.jt.wang @ 2025-05-14 6:45 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
george.kw.lee, leo.jt.wang
From: Leo Wang <leo.jt.wang@fii-foxconn.com>
Add linux device tree entry for Meta Clemente compute-tray
BMC using AST2600 SoC.
Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-facebook-clemente.dts | 1252 +++++++++++++++++
2 files changed, 1253 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index b3170fdd3096..9d0a465cbb36 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
aspeed-bmc-facebook-catalina.dtb \
+ aspeed-bmc-facebook-clemente.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-elbert.dtb \
aspeed-bmc-facebook-fuji.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 000000000000..543d6cac7de7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1252 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Clemente BMC";
+ compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ i2c16 = &i2c1mux0ch0;
+ i2c17 = &i2c1mux0ch1;
+ i2c18 = &i2c1mux0ch2;
+ i2c19 = &i2c1mux0ch3;
+ i2c20 = &i2c1mux0ch4;
+ i2c21 = &i2c1mux0ch5;
+ i2c22 = &i2c1mux0ch6;
+ i2c23 = &i2c1mux0ch7;
+ i2c24 = &i2c0mux0ch0;
+ i2c25 = &i2c0mux0ch1;
+ i2c26 = &i2c0mux0ch2;
+ i2c27 = &i2c0mux0ch3;
+ i2c28 = &i2c0mux1ch0;
+ i2c29 = &i2c0mux1ch1;
+ i2c30 = &i2c0mux1ch2;
+ i2c31 = &i2c0mux1ch3;
+ i2c32 = &i2c0mux2ch0;
+ i2c33 = &i2c0mux2ch1;
+ i2c34 = &i2c0mux2ch2;
+ i2c35 = &i2c0mux2ch3;
+ i2c36 = &i2c0mux3ch0;
+ i2c37 = &i2c0mux3ch1;
+ i2c38 = &i2c0mux3ch2;
+ i2c39 = &i2c0mux3ch3;
+ i2c40 = &i2c0mux4ch0;
+ i2c41 = &i2c0mux4ch1;
+ i2c42 = &i2c0mux4ch2;
+ i2c43 = &i2c0mux4ch3;
+ i2c44 = &i2c0mux5ch0;
+ i2c45 = &i2c0mux5ch1;
+ i2c46 = &i2c0mux5ch2;
+ i2c47 = &i2c0mux5ch3;
+ i2c48 = &i2c5mux0ch0;
+ i2c49 = &i2c5mux0ch1;
+ i2c50 = &i2c5mux0ch2;
+ i2c51 = &i2c5mux0ch3;
+ i2c52 = &i2c5mux0ch4;
+ i2c53 = &i2c5mux0ch5;
+ i2c54 = &i2c5mux0ch6;
+ i2c55 = &i2c5mux0ch7;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ spi1_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "bmc_ready_noled";
+ gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+
+ led-3 {
+ label = "bmc_ready_cpld_noled";
+ gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+ };
+
+ p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p2v5_bmc_aux";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>;
+ };
+ };
+
+};
+
+&udma {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ compatible = "aspeed,ast2600-uart";
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi3_default>;
+ use-ncsi;
+ ncsi-ctrl,start-redo-probe;
+ ncsi-package = <1>;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi4_default>;
+ use-ncsi;
+ ncsi-ctrl,start-redo-probe;
+ ncsi-package = <2>;
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // IOB0 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // IOB0 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux1ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux1ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 0 IOEXP
+ io_expander7: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux1ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux1ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@73 {
+ compatible = "nxp,pca9546";
+ reg = <0x73>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux2ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux2ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux2ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux2ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9546";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux3ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // IOB1 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux3ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux3ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // IOB1 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux3ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9546";
+ reg = <0x76>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux4ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux4ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 1 IOEXP
+ io_expander8: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux4ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux4ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux5ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux5ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux5ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux5ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ // HSC
+ power-monitor@12 {
+ compatible = "ti,lm5066i";
+ reg = <0x12>;
+ };
+
+ // HSC
+ power-monitor@14 {
+ compatible = "ti,lm5066i";
+ reg = <0x14>;
+ };
+
+ // HSC TEMP SENSOR
+ temperature-sensor@4a {
+ compatible = "ti,tmp461";
+ reg = <0x4a>;
+ };
+
+ // HSC FRU EEPROM
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+
+ // CPU0 Leak sensor MAX1363
+ Leak-sensor@34 {
+ compatible = "maxim,max1363";
+ reg = <0x34>;
+ };
+
+ // CPU1 Leak sensor MAX1363
+ Leak-sensor@35 {
+ compatible = "maxim,max1363";
+ reg = <0x35>;
+ };
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ power-sensor@22 {
+ compatible = "mps,mp5990";
+ reg = <0x22>;
+ };
+ };
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ i2c1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ fanctl0: fan-controller@21{
+ compatible = "maxim,max31790";
+ reg = <0x21>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@2 {
+ reg = <2>;
+ sensor-type = "TACH";
+ };
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
+ };
+ fanctl1: fan-controller@27{
+ compatible = "maxim,max31790";
+ reg = <0x27>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ channel@2 {
+ reg = <2>;
+ sensor-type = "TACH";
+ };
+ channel@5 {
+ reg = <5>;
+ sensor-type = "TACH";
+ };
+ };
+ };
+ i2c1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ i2c1mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ i2c1mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ // PDB FRU EEPROM
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
+ // PDB TEMP SENSOR
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+ };
+ i2c1mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+
+ // PDB IOEXP
+ io_expander5: gpio@27 {
+ compatible = "nxp,pca9554";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP IOEXP
+ io_expander6: gpio@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ i2c1mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+
+ // FIO FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ // FIO TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ // Module 0, Expander @0x20
+ io_expander0: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // Module 1, Expander @0x21
+ io_expander1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // HMC Expander @0x27
+ io_expander2: gpio@27 {
+ compatible = "nxp,pca9555";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // HMC Expander @0x74
+ io_expander3: gpio@74 {
+ compatible = "nxp,pca9555";
+ reg = <0x74>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // Module 0 Aux EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // Module 1 Aux EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ rtc@6f {
+ compatible = "nuvoton,nct3018y";
+ reg = <0x6f>;
+ };
+
+ // Interposer board EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ bus-frequency = <100000>;
+ multi-master;
+ aspeed,hw-timeout-ms = <1000>;
+
+ //USB Debug Connector
+ ipmb@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+
+ // SCM CPLD IOEXP
+ io_expander4: gpio@4f {
+ compatible = "nxp,pca9555";
+ reg = <0x4f>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // SCM TEMP SENSOR BOARD
+ temperature-sensor@4b {
+ compatible = "national,lm75b";
+ reg = <0x4b>;
+ };
+
+ // SCM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // BSM FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ // OCP NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ alert-gpios = <&gpio0 ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ timeout-ms = <5000>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ multi-master;
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c5mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c5mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c5mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ i2c5mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ i2c5mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ i2c5mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ // HDD FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+ };
+ i2c5mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ power-sensor@40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+ power-sensor@49 {
+ compatible = "ti,ina230";
+ reg = <0x49>;
+ shunt-resistor = <2000>;
+ };
+ };
+ };
+};
+
+&i2c13 {
+ status = "okay";
+ multi-master;
+
+ // HPM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ // CBC 0 FRU
+ eeprom@54 {
+ compatible = "atmel,24c02";
+ reg = <0x54>;
+ };
+ // CBC 1 FRU
+ eeprom@55 {
+ compatible = "atmel,24c02";
+ reg = <0x55>;
+ };
+ // CBC 2 FRU
+ eeprom@56 {
+ compatible = "atmel,24c02";
+ reg = <0x56>;
+ };
+ // CBC 3 FRU
+ eeprom@58 {
+ compatible = "atmel,24c02";
+ reg = <0x58>;
+ };
+ // HMC FRU EEPROM
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ // PDB CPLD IOEXP 0x10
+ io_expander9: gpio@10 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x10>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x11
+ io_expander10: gpio@11 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x12
+ io_expander11: gpio@12 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x13
+ io_expander12: gpio@13 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x14
+ io_expander13: gpio@14 {
+ compatible = "nxp,pca9555";
+ reg = <0x14>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ // OCP NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC1 FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+};
+
+&adc0 {
+ vref-supply = <&p1v8_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref-supply = <&p2v5_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&pinctrl {
+ pinctrl_ncsi3_default: ncsi3_default {
+ function = "RMII3";
+ groups = "NCSI3";
+ };
+
+ pinctrl_ncsi4_default: ncsi4_default {
+ function = "RMII4";
+ groups = "NCSI4";
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+ "BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+ "IOEXP_INT_L","FM_ID_LED",
+ "","",
+ /*C0-C7*/ "BMC_GPIOC0","","","",
+ "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+ "","BMC_I2C_SSIF_ALERT_L",
+ /*D0-D7*/ "","","","","BMC_GPIOD4","","","",
+ /*E0-E7*/ "BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","",
+ "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+ /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN",
+ "SHDN_FORCE_L","SHDN_REQ_L",
+ "","","","",
+ /*I0-I7*/ "","","","",
+ "","FLASH_WP_STATUS",
+ "FM_PDB_HEALTH_N","RUN_POWER_PG",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP",
+ "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+ "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+ /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1",
+ "LED_POSTCODE_2","LED_POSTCODE_3",
+ "LED_POSTCODE_4","LED_POSTCODE_5",
+ "LED_POSTCODE_6","LED_POSTCODE_7",
+ /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+ "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+ "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+ "","USBDBG_IPMI_EN_L",
+ /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+ "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+ "host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+ /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+ "UART_MUX_SEL","I2C_MUX_RESET_L",
+ "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+ "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+ /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+ "CPU_BOOT_DONE","PMBUS_GNT_L",
+ "CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+ "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+ /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+ "FM_BMC_DEBUG_SW_N","UID_LED_N",
+ "SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+ "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+ "SMB_BMC_TMP_ALERT","PWR_LED_N",
+ "SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","RST_BMC_SELF_HW",
+ "FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+ "BMC_GPIOY4","BMC_GPIOY5","","",
+ /*Z0-Z7*/ "","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "","","","","","","","",
+ /*18B0-18B3*/ "","","","",
+ /*18B4-18B7*/ "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+ /*18C0-18C7*/ "","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&io_expander0 {
+ gpio-line-names =
+ "FPGA_THERM_OVERT_L-I",
+ "FPGA_READY_BMC-I",
+ "HMC_BMC_DETECT-O",
+ "HMC_PGOOD-O",
+ "",
+ "BMC_STBY_CYCLE-O",
+ "FPGA_EROT_FATAL_ERROR_L-I",
+ "WP_HW_EXT_CTRL_L-O",
+ "EROT_FPGA_RST_L-O",
+ "FPGA_EROT_RECOVERY_L-O",
+ "BMC_EROT_FPGA_SPI_MUX_SEL-O",
+ "USB2_HUB_RST_L-O",
+ "",
+ "SGPIO_EN_L-O",
+ "B2B_IOEXP_INT_L-I",
+ "I2C_BUS_MUX_RESET_L-O";
+};
+
+&io_expander1 {
+ gpio-line-names =
+ "USB_MUX_SEL_N-O",
+ "",
+ "MCIO_PCIE_DISABLE_L-O",
+ "USB_PCIE_DISABLE_L-O",
+ "PEX_SW_PCIE_DISABLE_L-O",
+ "HSC_CARD_PRSNT_N-I",
+ "TPM_MUX_3V3_SEL_OUT_N-O",
+ "USB2_HUB4_RST_L-O",
+ "PCI_MUX_SEL-O",
+ "TPM_MUX_SEL-O",
+ "IOEXP_BMC_PHY_RST_N-O",
+ "IOEXP_RTC_CLR_L-O",
+ "BMC_12V_CTRL-O",
+ "PS_RUN_IO0_PG-I",
+ "",
+ "";
+};
+
+&io_expander2 {
+ gpio-line-names =
+ "HMC_PRSNT_L-I",
+ "HMC_READY-I",
+ "HMC_EROT_FATAL_ERROR_L-I",
+ "I2C_MUX_SEL-O",
+ "HMC_EROT_SPI_MUX_SEL-O",
+ "HMC_EROT_RECOVERY_L-O",
+ "HMC_EROT_RST_L-O",
+ "GLOBAL_WP_HMC-O",
+ "FPGA_RST_L-O",
+ "USB2_HUB_RST-O",
+ "CPU_UART_MUX_SEL-O",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&io_expander3 {
+ gpio-line-names =
+ "IOB_PRSNT_L",
+ "IOB_DP_HPD",
+ "IOX_BMC_RESET",
+ "IOB_IOEXP_INT_L",
+ "IOB_UID_LED_L",
+ "IOB_UID_BTN_L",
+ "IOB_SYS_RST_BTN_L",
+ "IOB_PWR_LED_L",
+ "IOB_PWR_BTN_L",
+ "IOB_PHY_RST",
+ "CPLD_JTAG_MUX_SEL",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&io_expander4 {
+ gpio-line-names =
+ "stby_power_en_cpld","stby_power_gd_cpld","","",
+ "","","","",
+ "","","","",
+ "","","","";
+};
+
+&io_expander5 {
+ gpio-line-names =
+ "JTAG_MUX_SEL","IOX_BMC_RESET","RTC_CLR_L","RTC_U77_ALRT_N",
+ "","PSU_ALERT_N","","RST_P12V_STBY_N";
+};
+
+&io_expander6 {
+ gpio-line-names =
+ "OSFP_PHASE_ID0","OSFP_PHASE_ID1",
+ "OSFP_PHASE_ID2","OSFP_PHASE_ID3",
+ "","","","",
+ "OSFP_BOARD_ID0","OSFP_BOARD_ID1",
+ "OSFP_BOARD_ID2","PWRGD_P3V3_N1",
+ "PWRGD_P3V3_N2","","","";
+};
+
+&io_expander7 {
+ gpio-line-names =
+ "RST_CX7_0","RST_CX7_1",
+ "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+ "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+ "CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+ "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+ "FNP_L_CX0","FNP_L_CX1",
+ "","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
+};
+
+&io_expander8 {
+ gpio-line-names =
+ "SEC_RST_CX7_0","SEC_RST_CX7_1",
+ "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+ "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+ "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+ "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+ "SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+ "","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
+};
+
+&io_expander9 {
+ gpio-line-names =
+ "wSequence_Latch_State_N","wP12V_N1N2_RUNTIME_FLT_N",
+ "wP12V_FAN_RUNTIME_FLT_N","wP12V_AUX_RUNTIME_FLT_N",
+ "wHost_PERST_SEQPWR_FLT_N","wP12V_N1N2_SEQPWR_FLT_N",
+ "wP12V_FAN_SEQPWR_FLT_N","wP12V_AUX_SEQPWR_FLT_N",
+ "wP12V_RUNTIME_FLT_NIC1_N","wAUX_RUNTIME_FLT_NIC1_N",
+ "wP12V_SEQPWR_FLT_NIC1_N","wAUX_SEQPWR_FLT_NIC1_N",
+ "wP12V_RUNTIME_FLT_NIC0_N","wAUX_RUNTIME_FLT_NIC0_N",
+ "wP12V_SEQPWR_FLT_NIC0_N","wAUX_SEQPWR_FLT_NIC0_N";
+};
+
+&io_expander10 {
+ gpio-line-names =
+ "FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
+ "FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
+ "P48V_HS2_FAULT_N_PLD","P48V_HS1_FAULT_N_PLD",
+ "P12V_AUX_FAN_OC_PLD_N","P12V_AUX_FAN_FAULT_PLD_N",
+ "","",
+ "","",
+ "","FM_SYS_THROTTLE_N",
+ "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+ "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+};
+
+&io_expander11 {
+ gpio-line-names =
+ "P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+ "P12V_AUX_NIC1_SENSE_ALERT_R_N","P12V_AUX_NIC0_SENSE_ALERT_R_N",
+ "NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
+ "P12V_AUX_FAN_ALERT_PLD_N","P52V_SENSE_ALERT_PLD_N",
+ "PRSNT_RJ45_FIO_N_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+ "CHASSIS3_LEAK_Q_N_PLD","CHASSIS2_LEAK_Q_N_PLD",
+ "CHASSIS1_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+ "","SMB_RJ45_FIO_TMP_ALERT";
+};
+
+&io_expander12 {
+ gpio-line-names =
+ "FAN_7_PRESENT_N","FAN_6_PRESENT_N",
+ "FAN_5_PRESENT_N","FAN_4_PRESENT_N",
+ "FAN_3_PRESENT_N","FAN_2_PRESENT_N",
+ "FAN_1_PRESENT_N","FAN_0_PRESENT_N",
+ "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+ "PRSNT_HDDBD_POWER_CABLE_N","PRSNT_OSFP0_POWER_CABLE_N",
+ "PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+ "PRSNT_CHASSIS1_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+};
+
+&io_expander13 {
+ gpio-line-names =
+ "rmc_en_dc_pwr_on","",
+ "","",
+ "","",
+ "","",
+ "leak_config_0","leak_config_1",
+ "leak_config_2","leak_config_3",
+ "mfg_led_test_mode_l","small_leak_err_inj",
+ "large_leak_err_inj","";
+};
+
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC
2025-05-13 3:10 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC leo.jt.wang
` (2 preceding siblings ...)
2025-05-14 6:45 ` [PATCH V2 " leo.jt.wang
@ 2025-05-14 13:11 ` Rob Herring (Arm)
2025-05-26 10:01 ` [PATCH V3 " leo.jt.wang
4 siblings, 0 replies; 11+ messages in thread
From: Rob Herring (Arm) @ 2025-05-14 13:11 UTC (permalink / raw)
To: leo.jt.wang
Cc: Andrew Jeffery, linux-arm-kernel, george.kw.lee, Conor Dooley,
leo.jt.wang, Joel Stanley, Krzysztof Kozlowski, linux-kernel,
linux-aspeed, devicetree
On Tue, 13 May 2025 11:10:10 +0800, leo.jt.wang@gmail.com wrote:
> From: Leo Wang <leo.jt.wang@fii-foxconn.com>
>
> Add linux device tree entry for Meta Clemente compute-tray
> BMC using AST2600 SoC.
>
> Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
> ---
> arch/arm/boot/dts/aspeed/Makefile | 1 +
> .../aspeed/aspeed-bmc-facebook-clemente.dts | 1269 +++++++++++++++++
> 2 files changed, 1270 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: tags/next-20250514 (exact match)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 6822b851.050a0220.27a24d.d071@mx.google.com:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: / (facebook,clemente-bmc): compatible: 'oneOf' conditional failed, one must be fixed:
'facebook,clemente-bmc' is not one of ['delta,ahe50dc-bmc', 'facebook,galaxy100-bmc', 'facebook,wedge100-bmc', 'facebook,wedge40-bmc', 'microsoft,olympus-bmc', 'quanta,q71l-bmc', 'tyan,palmetto-bmc', 'yadro,vesnin-bmc']
'facebook,clemente-bmc' is not one of ['amd,daytonax-bmc', 'amd,ethanolx-bmc', 'ampere,mtjade-bmc', 'aspeed,ast2500-evb', 'asrock,e3c246d4i-bmc', 'asrock,e3c256d4i-bmc', 'asrock,romed8hm3-bmc', 'asrock,spc621d8hm3-bmc', 'asrock,x570d4u-bmc', 'bytedance,g220a-bmc', 'facebook,cmm-bmc', 'facebook,minipack-bmc', 'facebook,tiogapass-bmc', 'facebook,yamp-bmc', 'facebook,yosemitev2-bmc', 'facebook,wedge400-bmc', 'hxt,stardragon4800-rep2-bmc', 'ibm,mihawk-bmc', 'ibm,mowgli-bmc', 'ibm,romulus-bmc', 'ibm,swift-bmc', 'ibm,witherspoon-bmc', 'ingrasys,zaius-bmc', 'inspur,fp5280g2-bmc', 'inspur,nf5280m6-bmc', 'inspur,on5263m5-bmc', 'intel,s2600wf-bmc', 'inventec,lanyang-bmc', 'lenovo,hr630-bmc', 'lenovo,hr855xg2-bmc', 'portwell,neptune-bmc', 'qcom,centriq2400-rep-bmc', 'supermicro,x11spi-bmc', 'tyan,s7106-bmc', 'tyan,s8036-bmc', 'yadro,nicole-bmc', 'yadro,vegman-n110-bmc', 'yadro,vegman-rx20-bmc', 'yadro,vegman-sx20-bmc']
'facebook,clemente-bmc' is not one of ['ampere,mtjefferson-bmc', 'ampere,mtmitchell-bmc', 'aspeed,ast2600-evb', 'aspeed,ast2600-evb-a1', 'asus,x4tf-bmc', 'facebook,bletchley-bmc', 'facebook,catalina-bmc', 'facebook,cloudripper-bmc', 'facebook,elbert-bmc', 'facebook,fuji-bmc', 'facebook,greatlakes-bmc', 'facebook,harma-bmc', 'facebook,minerva-cmc', 'facebook,yosemite4-bmc', 'ibm,blueridge-bmc', 'ibm,everest-bmc', 'ibm,fuji-bmc', 'ibm,rainier-bmc', 'ibm,sbp1-bmc', 'ibm,system1-bmc', 'ibm,tacoma-bmc', 'inventec,starscream-bmc', 'inventec,transformer-bmc', 'jabil,rbp-bmc', 'nvidia,gb200nvl-bmc', 'qcom,dc-scm-v1-bmc', 'quanta,s6q-bmc', 'ufispace,ncplite-bmc']
'aspeed,ast2400' was expected
'aspeed,ast2500' was expected
from schema $id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /: failed to match any schema with compatible: ['facebook,clemente-bmc', 'aspeed,ast2600']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: ethernet@1e670000 (aspeed,ast2600-mac): Unevaluated properties are not allowed ('ncsi-ctrl,start-redo-probe', 'ncsi-package' were unexpected)
from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: ethernet@1e670000 (aspeed,ast2600-mac): 'ncsi-ctrl,start-redo-probe' does not match any of the regexes: '^#.*', '^(at25|bm|devbus|dmacap|dsa|exynos|fsi[ab]|gpio-fan|gpio-key|gpio|gpmc|hdmi|i2c-gpio),.*', '^(keypad|m25p|max8952|max8997|max8998|mpmc),.*', '^(pciclass|pinctrl-single|#pinctrl-single|PowerPC),.*', '^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*', '^(simple-audio-card|st-plgpio|st-spics|ts),.*', '^100ask,.*', '^70mai,.*', '^8dev,.*', '^GEFanuc,.*', '^IBM,.*', '^ORCL,.*', '^SUNW,.*', '^[a-zA-Z0-9#_][a-zA-Z0-9+\-._@]{0,63}$', '^[a-zA-Z0-9+\-._]*@[0-9a-zA-Z,]*$', '^abb,.*', '^abilis,.*', '^abracon,.*', '^abt,.*', '^acbel,.*', '^acelink,.*', '^acer,.*', '^acme,.*', '^actions,.*', '^active-semi,.*', '^ad,.*', '^adafruit,.*', '^adapteva,.*', '^adaptrum,.*', '^adh,.*', '^adi,.*', '^adieng,.*', '^admatec,.*', '^advantech,.*', '^aeroflexgaisler,.*', '^aesop,.*', '^airoha,.*', '^al,.*', '^alcatel,.*', '^aldec,.*
', '^alfa-network,.*', '^allegro,.*', '^allegromicro,.*', '^alliedvision,.*', '^allo,.*', '^allwinner,.*', '^alphascale,.*', '^alps,.*', '^alt,.*', '^altr,.*', '^amarula,.*', '^amazon,.*', '^amcc,.*', '^amd,.*', '^amediatech,.*', '^amlogic,.*', '^ampere,.*', '^amphenol,.*', '^ampire,.*', '^ams,.*', '^amstaos,.*', '^analogix,.*', '^anbernic,.*', '^andestech,.*', '^anvo,.*', '^aoly,.*', '^aosong,.*', '^apm,.*', '^apple,.*', '^aptina,.*', '^arasan,.*', '^archermind,.*', '^arcom,.*', '^arctic,.*', '^arcx,.*', '^ariaboard,.*', '^aries,.*', '^arm,.*', '^armadeus,.*', '^armsom,.*', '^arrow,.*', '^artesyn,.*', '^asahi-kasei,.*', '^asc,.*', '^asix,.*', '^aspeed,.*', '^asrock,.*', '^asteralabs,.*', '^asus,.*', '^atheros,.*', '^atlas,.*', '^atmel,.*', '^auo,.*', '^auvidea,.*', '^avago,.*', '^avia,.*', '^avic,.*', '^avnet,.*', '^awinic,.*', '^axentia,.*', '^axis,.*', '^azoteq,.*', '^azw,.*', '^baikal,.*', '^bananapi,.*', '^beacon,.*', '^beagle,.*', '^belling,.*', '^bhf,.*', '^bigtreetech,.*', '
^bitmain,.*', '^blaize,.*', '^blutek,.*', '^boe,.*', '^bosch,.*', '^boundary,.*', '^brcm,.*', '^broadmobi,.*', '^bsh,.*', '^bticino,.*', '^buffalo,.*', '^bur,.*', '^bytedance,.*', '^calamp,.*', '^calao,.*', '^calaosystems,.*', '^calxeda,.*', '^cameo,.*', '^canaan,.*', '^caninos,.*', '^capella,.*', '^cascoda,.*', '^catalyst,.*', '^cavium,.*', '^cct,.*', '^cdns,.*', '^cdtech,.*', '^cellwise,.*', '^ceva,.*', '^chargebyte,.*', '^checkpoint,.*', '^chefree,.*', '^chipidea,.*', '^chipone,.*', '^chipspark,.*', '^chongzhou,.*', '^chrontel,.*', '^chrp,.*', '^chunghwa,.*', '^chuwi,.*', '^ciaa,.*', '^cirrus,.*', '^cisco,.*', '^clockwork,.*', '^cloos,.*', '^cloudengines,.*', '^cnm,.*', '^cnxt,.*', '^colorfly,.*', '^compulab,.*', '^comvetia,.*', '^congatec,.*', '^coolpi,.*', '^coreriver,.*', '^corpro,.*', '^cortina,.*', '^cosmic,.*', '^crane,.*', '^creative,.*', '^crystalfontz,.*', '^csky,.*', '^csot,.*', '^csq,.*', '^ctera,.*', '^ctu,.*', '^cubietech,.*', '^cudy,.*', '^cui,.*', '^cypress,.*', '^
cyx,.*', '^cznic,.*', '^dallas,.*', '^dataimage,.*', '^davicom,.*', '^deepcomputing,.*', '^dell,.*', '^delta,.*', '^densitron,.*', '^denx,.*', '^devantech,.*', '^dfi,.*', '^dfrobot,.*', '^dh,.*', '^difrnce,.*', '^digi,.*', '^digilent,.*', '^dimonoff,.*', '^diodes,.*', '^dioo,.*', '^dlc,.*', '^dlg,.*', '^dlink,.*', '^dmo,.*', '^domintech,.*', '^dongwoon,.*', '^dptechnics,.*', '^dragino,.*', '^dream,.*', '^ds,.*', '^dserve,.*', '^dynaimage,.*', '^ea,.*', '^ebang,.*', '^ebbg,.*', '^ebs-systart,.*', '^ebv,.*', '^eckelmann,.*', '^econet,.*', '^edgeble,.*', '^edimax,.*', '^edt,.*', '^ees,.*', '^eeti,.*', '^einfochips,.*', '^eink,.*', '^elan,.*', '^element14,.*', '^elgin,.*', '^elida,.*', '^elimo,.*', '^elpida,.*', '^embedfire,.*', '^embest,.*', '^emcraft,.*', '^emlid,.*', '^emmicro,.*', '^empire-electronix,.*', '^emtrion,.*', '^enclustra,.*', '^endless,.*', '^ene,.*', '^energymicro,.*', '^engicam,.*', '^engleder,.*', '^epcos,.*', '^epfl,.*', '^epson,.*', '^esp,.*', '^est,.*', '^ettus,.*',
'^eukrea,.*', '^everest,.*', '^everspin,.*', '^evervision,.*', '^exar,.*', '^excito,.*', '^exegin,.*', '^ezchip,.*', '^facebook,.*', '^fairchild,.*', '^fairphone,.*', '^faraday,.*', '^fascontek,.*', '^fastrax,.*', '^fcs,.*', '^feixin,.*', '^feiyang,.*', '^fii,.*', '^firefly,.*', '^focaltech,.*', '^forlinx,.*', '^freebox,.*', '^freecom,.*', '^frida,.*', '^friendlyarm,.*', '^fsl,.*', '^fujitsu,.*', '^fxtec,.*', '^galaxycore,.*', '^gameforce,.*', '^gardena,.*', '^gateway,.*', '^gateworks,.*', '^gcw,.*', '^ge,.*', '^geekbuying,.*', '^gef,.*', '^gehc,.*', '^gemei,.*', '^gemtek,.*', '^genesys,.*', '^genexis,.*', '^geniatech,.*', '^giantec,.*', '^giantplus,.*', '^glinet,.*', '^globalscale,.*', '^globaltop,.*', '^gmt,.*', '^gocontroll,.*', '^goldelico,.*', '^goodix,.*', '^google,.*', '^goramo,.*', '^gplus,.*', '^grinn,.*', '^grmn,.*', '^gumstix,.*', '^gw,.*', '^hannstar,.*', '^haochuangyi,.*', '^haoyu,.*', '^hardkernel,.*', '^hechuang,.*', '^hideep,.*', '^himax,.*', '^hirschmann,.*', '^his
i,.*', '^hisilicon,.*', '^hit,.*', '^hitex,.*', '^holt,.*', '^holtek,.*', '^honestar,.*', '^honeywell,.*', '^hoperf,.*', '^hoperun,.*', '^hp,.*', '^hpe,.*', '^hsg,.*', '^htc,.*', '^huawei,.*', '^hugsun,.*', '^hwacom,.*', '^hxt,.*', '^hycon,.*', '^hydis,.*', '^hynitron,.*', '^hynix,.*', '^hyundai,.*', '^i2se,.*', '^ibm,.*', '^icplus,.*', '^idt,.*', '^iei,.*', '^ifi,.*', '^ilitek,.*', '^imagis,.*', '^img,.*', '^imi,.*', '^inanbo,.*', '^incircuit,.*', '^indiedroid,.*', '^inet-tek,.*', '^infineon,.*', '^inforce,.*', '^ingenic,.*', '^ingrasys,.*', '^injoinic,.*', '^innocomm,.*', '^innolux,.*', '^inside-secure,.*', '^insignal,.*', '^inspur,.*', '^intel,.*', '^intercontrol,.*', '^invensense,.*', '^inventec,.*', '^inversepath,.*', '^iom,.*', '^irondevice,.*', '^isee,.*', '^isil,.*', '^issi,.*', '^ite,.*', '^itead,.*', '^itian,.*', '^ivo,.*', '^iwave,.*', '^jadard,.*', '^jasonic,.*', '^jdi,.*', '^jedec,.*', '^jenson,.*', '^jesurun,.*', '^jethome,.*', '^jianda,.*', '^jide,.*', '^joz,.*', '^ka
m,.*', '^karo,.*', '^keithkoep,.*', '^keymile,.*', '^khadas,.*', '^kiebackpeter,.*', '^kinetic,.*', '^kingdisplay,.*', '^kingnovel,.*', '^kionix,.*', '^kobo,.*', '^kobol,.*', '^koe,.*', '^kontron,.*', '^kosagi,.*', '^kvg,.*', '^kyo,.*', '^lacie,.*', '^laird,.*', '^lamobo,.*', '^lantiq,.*', '^lattice,.*', '^lckfb,.*', '^lctech,.*', '^leadtek,.*', '^leez,.*', '^lego,.*', '^lemaker,.*', '^lenovo,.*', '^lg,.*', '^lgphilips,.*', '^libretech,.*', '^licheepi,.*', '^linaro,.*', '^lincolntech,.*', '^lineartechnology,.*', '^linksprite,.*', '^linksys,.*', '^linutronix,.*', '^linux,.*', '^linx,.*', '^liontron,.*', '^liteon,.*', '^litex,.*', '^lltc,.*', '^logicpd,.*', '^logictechno,.*', '^longcheer,.*', '^lontium,.*', '^loongmasses,.*', '^loongson,.*', '^lsi,.*', '^lunzn,.*', '^luxul,.*', '^lwn,.*', '^lxa,.*', '^m5stack,.*', '^macnica,.*', '^mantix,.*', '^mapleboard,.*', '^marantec,.*', '^marvell,.*', '^maxbotix,.*', '^maxim,.*', '^maxlinear,.*', '^mbvl,.*', '^mcube,.*', '^meas,.*', '^mecer,.*',
'^mediatek,.*', '^megachips,.*', '^mele,.*', '^melexis,.*', '^melfas,.*', '^mellanox,.*', '^memsensing,.*', '^memsic,.*', '^menlo,.*', '^mentor,.*', '^meraki,.*', '^merrii,.*', '^methode,.*', '^micrel,.*', '^microchip,.*', '^microcrystal,.*', '^micron,.*', '^microsoft,.*', '^microsys,.*', '^microtips,.*', '^mikroe,.*', '^mikrotik,.*', '^milkv,.*', '^miniand,.*', '^minix,.*', '^mips,.*', '^miramems,.*', '^mitsubishi,.*', '^mitsumi,.*', '^mixel,.*', '^miyoo,.*', '^mntre,.*', '^mobileye,.*', '^modtronix,.*', '^moortec,.*', '^mosaixtech,.*', '^motorcomm,.*', '^motorola,.*', '^moxa,.*', '^mpl,.*', '^mps,.*', '^mqmaker,.*', '^mrvl,.*', '^mscc,.*', '^msi,.*', '^mstar,.*', '^mti,.*', '^multi-inno,.*', '^mundoreader,.*', '^murata,.*', '^mxic,.*', '^mxicy,.*', '^myir,.*', '^national,.*', '^neardi,.*', '^nec,.*', '^neofidelity,.*', '^neonode,.*', '^netcube,.*', '^netgear,.*', '^netlogic,.*', '^netron-dy,.*', '^netronix,.*', '^netxeon,.*', '^neweast,.*', '^newhaven,.*', '^newvision,.*', '^nexb
ox,.*', '^nextthing,.*', '^ni,.*', '^nintendo,.*', '^nlt,.*', '^nokia,.*', '^nordic,.*', '^nothing,.*', '^novatek,.*', '^novtech,.*', '^numonyx,.*', '^nutsboard,.*', '^nuvoton,.*', '^nvd,.*', '^nvidia,.*', '^nxp,.*', '^oceanic,.*', '^ocs,.*', '^oct,.*', '^okaya,.*', '^oki,.*', '^olimex,.*', '^olpc,.*', '^oneplus,.*', '^onie,.*', '^onion,.*', '^onnn,.*', '^ontat,.*', '^opalkelly,.*', '^openailab,.*', '^opencores,.*', '^openembed,.*', '^openpandora,.*', '^openrisc,.*', '^openwrt,.*', '^option,.*', '^oranth,.*', '^orisetech,.*', '^ortustech,.*', '^osddisplays,.*', '^osmc,.*', '^ouya,.*', '^overkiz,.*', '^ovti,.*', '^oxsemi,.*', '^ozzmaker,.*', '^panasonic,.*', '^parade,.*', '^parallax,.*', '^pda,.*', '^pegatron,.*', '^pericom,.*', '^pervasive,.*', '^phicomm,.*', '^phytec,.*', '^picochip,.*', '^pinctrl-[0-9]+$', '^pine64,.*', '^pineriver,.*', '^pixcir,.*', '^plantower,.*', '^plathome,.*', '^plda,.*', '^plx,.*', '^ply,.*', '^pni,.*', '^pocketbook,.*', '^polaroid,.*', '^polyhex,.*', '^por
twell,.*', '^poslab,.*', '^pov,.*', '^powertip,.*', '^powervr,.*', '^powkiddy,.*', '^pri,.*', '^primeview,.*', '^primux,.*', '^probox2,.*', '^prt,.*', '^pulsedlight,.*', '^purism,.*', '^puya,.*', '^qca,.*', '^qcom,.*', '^qemu,.*', '^qi,.*', '^qiaodian,.*', '^qihua,.*', '^qishenglong,.*', '^qnap,.*', '^quanta,.*', '^radxa,.*', '^raidsonic,.*', '^ralink,.*', '^ramtron,.*', '^raspberrypi,.*', '^raydium,.*', '^rda,.*', '^realtek,.*', '^relfor,.*', '^remarkable,.*', '^renesas,.*', '^rervision,.*', '^retronix,.*', '^revotics,.*', '^rex,.*', '^richtek,.*', '^ricoh,.*', '^rikomagic,.*', '^riot,.*', '^riscv,.*', '^rockchip,.*', '^rocktech,.*', '^rohm,.*', '^ronbo,.*', '^roofull,.*', '^roseapplepi,.*', '^rve,.*', '^saef,.*', '^samsung,.*', '^samtec,.*', '^sancloud,.*', '^sandisk,.*', '^satoz,.*', '^sbs,.*', '^schindler,.*', '^schneider,.*', '^sciosense,.*', '^seagate,.*', '^seeed,.*', '^seirobotics,.*', '^semtech,.*', '^senseair,.*', '^sensirion,.*', '^sensortek,.*', '^sercomm,.*', '^sff,.*',
'^sgd,.*', '^sgmicro,.*', '^sgx,.*', '^sharp,.*', '^shift,.*', '^shimafuji,.*', '^shineworld,.*', '^shiratech,.*', '^si-en,.*', '^si-linux,.*', '^siemens,.*', '^sifive,.*', '^siflower,.*', '^sigma,.*', '^sii,.*', '^sil,.*', '^silabs,.*', '^silan,.*', '^silead,.*', '^silergy,.*', '^silex-insight,.*', '^siliconfile,.*', '^siliconmitus,.*', '^silvaco,.*', '^simtek,.*', '^sinlinx,.*', '^sinovoip,.*', '^sinowealth,.*', '^sipeed,.*', '^sirf,.*', '^sis,.*', '^sitronix,.*', '^skov,.*', '^skyworks,.*', '^smartlabs,.*', '^smartrg,.*', '^smi,.*', '^smsc,.*', '^snps,.*', '^sochip,.*', '^socionext,.*', '^solidrun,.*', '^solomon,.*', '^sony,.*', '^sophgo,.*', '^sourceparts,.*', '^spacemit,.*', '^spansion,.*', '^sparkfun,.*', '^spinalhdl,.*', '^sprd,.*', '^square,.*', '^ssi,.*', '^sst,.*', '^sstar,.*', '^st,.*', '^st-ericsson,.*', '^starfive,.*', '^starry,.*', '^startek,.*', '^starterkit,.*', '^ste,.*', '^stericsson,.*', '^storlink,.*', '^storm,.*', '^storopack,.*', '^summit,.*', '^sunchip,.*', '
^sundance,.*', '^sunplus,.*', '^supermicro,.*', '^swir,.*', '^syna,.*', '^synology,.*', '^synopsys,.*', '^tbs,.*', '^tbs-biometrics,.*', '^tcg,.*', '^tcl,.*', '^tcs,.*', '^tcu,.*', '^tdo,.*', '^team-source-display,.*', '^technexion,.*', '^technologic,.*', '^techstar,.*', '^techwell,.*', '^teejet,.*', '^teltonika,.*', '^tempo,.*', '^terasic,.*', '^tesla,.*', '^test,.*', '^tfc,.*', '^thead,.*', '^thine,.*', '^thingyjp,.*', '^thundercomm,.*', '^thwc,.*', '^ti,.*', '^tianma,.*', '^tlm,.*', '^tmt,.*', '^topeet,.*', '^topic,.*', '^topland,.*', '^toppoly,.*', '^topwise,.*', '^toradex,.*', '^toshiba,.*', '^toumaz,.*', '^tpk,.*', '^tplink,.*', '^tpo,.*', '^tq,.*', '^transpeed,.*', '^traverse,.*', '^tronfy,.*', '^tronsmart,.*', '^truly,.*', '^tsd,.*', '^turing,.*', '^tyan,.*', '^tyhx,.*', '^u-blox,.*', '^u-boot,.*', '^ubnt,.*', '^ucrobotics,.*', '^udoo,.*', '^ufispace,.*', '^ugoos,.*', '^uni-t,.*', '^uniwest,.*', '^upisemi,.*', '^urt,.*', '^usi,.*', '^usr,.*', '^utoo,.*', '^v3,.*', '^vaisala,
.*', '^vamrs,.*', '^variscite,.*', '^vdl,.*', '^vertexcom,.*', '^via,.*', '^vialab,.*', '^vicor,.*', '^videostrong,.*', '^virtio,.*', '^virtual,.*', '^vishay,.*', '^visionox,.*', '^vitesse,.*', '^vivante,.*', '^vivax,.*', '^vocore,.*', '^voipac,.*', '^voltafield,.*', '^vot,.*', '^vscom,.*', '^vxt,.*', '^wacom,.*', '^wanchanglong,.*', '^wand,.*', '^waveshare,.*', '^wd,.*', '^we,.*', '^welltech,.*', '^wetek,.*', '^wexler,.*', '^whwave,.*', '^wi2wi,.*', '^widora,.*', '^wiligear,.*', '^willsemi,.*', '^winbond,.*', '^wingtech,.*', '^winlink,.*', '^winsen,.*', '^winstar,.*', '^wirelesstag,.*', '^wits,.*', '^wlf,.*', '^wm,.*', '^wobo,.*', '^wolfvision,.*', '^x-powers,.*', '^xen,.*', '^xes,.*', '^xiaomi,.*', '^xillybus,.*', '^xingbangda,.*', '^xinpeng,.*', '^xiphera,.*', '^xlnx,.*', '^xnano,.*', '^xunlong,.*', '^xylon,.*', '^yadro,.*', '^yamaha,.*', '^yes-optoelectronics,.*', '^yic,.*', '^yiming,.*', '^ylm,.*', '^yna,.*', '^yones-toptech,.*', '^ys,.*', '^ysoft,.*', '^yuridenki,.*', '^yuzuki
hd,.*', '^zarlink,.*', '^zealz,.*', '^zeitec,.*', '^zidoo,.*', '^zii,.*', '^zinitix,.*', '^zkmagic,.*', '^zte,.*', '^zyxel,.*'
from schema $id: http://devicetree.org/schemas/vendor-prefixes.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: ethernet@1e690000 (aspeed,ast2600-mac): Unevaluated properties are not allowed ('ncsi-ctrl,start-redo-probe', 'ncsi-package' were unexpected)
from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: ethernet@1e690000 (aspeed,ast2600-mac): 'ncsi-ctrl,start-redo-probe' does not match any of the regexes: '^#.*', '^(at25|bm|devbus|dmacap|dsa|exynos|fsi[ab]|gpio-fan|gpio-key|gpio|gpmc|hdmi|i2c-gpio),.*', '^(keypad|m25p|max8952|max8997|max8998|mpmc),.*', '^(pciclass|pinctrl-single|#pinctrl-single|PowerPC),.*', '^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*', '^(simple-audio-card|st-plgpio|st-spics|ts),.*', '^100ask,.*', '^70mai,.*', '^8dev,.*', '^GEFanuc,.*', '^IBM,.*', '^ORCL,.*', '^SUNW,.*', '^[a-zA-Z0-9#_][a-zA-Z0-9+\-._@]{0,63}$', '^[a-zA-Z0-9+\-._]*@[0-9a-zA-Z,]*$', '^abb,.*', '^abilis,.*', '^abracon,.*', '^abt,.*', '^acbel,.*', '^acelink,.*', '^acer,.*', '^acme,.*', '^actions,.*', '^active-semi,.*', '^ad,.*', '^adafruit,.*', '^adapteva,.*', '^adaptrum,.*', '^adh,.*', '^adi,.*', '^adieng,.*', '^admatec,.*', '^advantech,.*', '^aeroflexgaisler,.*', '^aesop,.*', '^airoha,.*', '^al,.*', '^alcatel,.*', '^aldec,.*
', '^alfa-network,.*', '^allegro,.*', '^allegromicro,.*', '^alliedvision,.*', '^allo,.*', '^allwinner,.*', '^alphascale,.*', '^alps,.*', '^alt,.*', '^altr,.*', '^amarula,.*', '^amazon,.*', '^amcc,.*', '^amd,.*', '^amediatech,.*', '^amlogic,.*', '^ampere,.*', '^amphenol,.*', '^ampire,.*', '^ams,.*', '^amstaos,.*', '^analogix,.*', '^anbernic,.*', '^andestech,.*', '^anvo,.*', '^aoly,.*', '^aosong,.*', '^apm,.*', '^apple,.*', '^aptina,.*', '^arasan,.*', '^archermind,.*', '^arcom,.*', '^arctic,.*', '^arcx,.*', '^ariaboard,.*', '^aries,.*', '^arm,.*', '^armadeus,.*', '^armsom,.*', '^arrow,.*', '^artesyn,.*', '^asahi-kasei,.*', '^asc,.*', '^asix,.*', '^aspeed,.*', '^asrock,.*', '^asteralabs,.*', '^asus,.*', '^atheros,.*', '^atlas,.*', '^atmel,.*', '^auo,.*', '^auvidea,.*', '^avago,.*', '^avia,.*', '^avic,.*', '^avnet,.*', '^awinic,.*', '^axentia,.*', '^axis,.*', '^azoteq,.*', '^azw,.*', '^baikal,.*', '^bananapi,.*', '^beacon,.*', '^beagle,.*', '^belling,.*', '^bhf,.*', '^bigtreetech,.*', '
^bitmain,.*', '^blaize,.*', '^blutek,.*', '^boe,.*', '^bosch,.*', '^boundary,.*', '^brcm,.*', '^broadmobi,.*', '^bsh,.*', '^bticino,.*', '^buffalo,.*', '^bur,.*', '^bytedance,.*', '^calamp,.*', '^calao,.*', '^calaosystems,.*', '^calxeda,.*', '^cameo,.*', '^canaan,.*', '^caninos,.*', '^capella,.*', '^cascoda,.*', '^catalyst,.*', '^cavium,.*', '^cct,.*', '^cdns,.*', '^cdtech,.*', '^cellwise,.*', '^ceva,.*', '^chargebyte,.*', '^checkpoint,.*', '^chefree,.*', '^chipidea,.*', '^chipone,.*', '^chipspark,.*', '^chongzhou,.*', '^chrontel,.*', '^chrp,.*', '^chunghwa,.*', '^chuwi,.*', '^ciaa,.*', '^cirrus,.*', '^cisco,.*', '^clockwork,.*', '^cloos,.*', '^cloudengines,.*', '^cnm,.*', '^cnxt,.*', '^colorfly,.*', '^compulab,.*', '^comvetia,.*', '^congatec,.*', '^coolpi,.*', '^coreriver,.*', '^corpro,.*', '^cortina,.*', '^cosmic,.*', '^crane,.*', '^creative,.*', '^crystalfontz,.*', '^csky,.*', '^csot,.*', '^csq,.*', '^ctera,.*', '^ctu,.*', '^cubietech,.*', '^cudy,.*', '^cui,.*', '^cypress,.*', '^
cyx,.*', '^cznic,.*', '^dallas,.*', '^dataimage,.*', '^davicom,.*', '^deepcomputing,.*', '^dell,.*', '^delta,.*', '^densitron,.*', '^denx,.*', '^devantech,.*', '^dfi,.*', '^dfrobot,.*', '^dh,.*', '^difrnce,.*', '^digi,.*', '^digilent,.*', '^dimonoff,.*', '^diodes,.*', '^dioo,.*', '^dlc,.*', '^dlg,.*', '^dlink,.*', '^dmo,.*', '^domintech,.*', '^dongwoon,.*', '^dptechnics,.*', '^dragino,.*', '^dream,.*', '^ds,.*', '^dserve,.*', '^dynaimage,.*', '^ea,.*', '^ebang,.*', '^ebbg,.*', '^ebs-systart,.*', '^ebv,.*', '^eckelmann,.*', '^econet,.*', '^edgeble,.*', '^edimax,.*', '^edt,.*', '^ees,.*', '^eeti,.*', '^einfochips,.*', '^eink,.*', '^elan,.*', '^element14,.*', '^elgin,.*', '^elida,.*', '^elimo,.*', '^elpida,.*', '^embedfire,.*', '^embest,.*', '^emcraft,.*', '^emlid,.*', '^emmicro,.*', '^empire-electronix,.*', '^emtrion,.*', '^enclustra,.*', '^endless,.*', '^ene,.*', '^energymicro,.*', '^engicam,.*', '^engleder,.*', '^epcos,.*', '^epfl,.*', '^epson,.*', '^esp,.*', '^est,.*', '^ettus,.*',
'^eukrea,.*', '^everest,.*', '^everspin,.*', '^evervision,.*', '^exar,.*', '^excito,.*', '^exegin,.*', '^ezchip,.*', '^facebook,.*', '^fairchild,.*', '^fairphone,.*', '^faraday,.*', '^fascontek,.*', '^fastrax,.*', '^fcs,.*', '^feixin,.*', '^feiyang,.*', '^fii,.*', '^firefly,.*', '^focaltech,.*', '^forlinx,.*', '^freebox,.*', '^freecom,.*', '^frida,.*', '^friendlyarm,.*', '^fsl,.*', '^fujitsu,.*', '^fxtec,.*', '^galaxycore,.*', '^gameforce,.*', '^gardena,.*', '^gateway,.*', '^gateworks,.*', '^gcw,.*', '^ge,.*', '^geekbuying,.*', '^gef,.*', '^gehc,.*', '^gemei,.*', '^gemtek,.*', '^genesys,.*', '^genexis,.*', '^geniatech,.*', '^giantec,.*', '^giantplus,.*', '^glinet,.*', '^globalscale,.*', '^globaltop,.*', '^gmt,.*', '^gocontroll,.*', '^goldelico,.*', '^goodix,.*', '^google,.*', '^goramo,.*', '^gplus,.*', '^grinn,.*', '^grmn,.*', '^gumstix,.*', '^gw,.*', '^hannstar,.*', '^haochuangyi,.*', '^haoyu,.*', '^hardkernel,.*', '^hechuang,.*', '^hideep,.*', '^himax,.*', '^hirschmann,.*', '^his
i,.*', '^hisilicon,.*', '^hit,.*', '^hitex,.*', '^holt,.*', '^holtek,.*', '^honestar,.*', '^honeywell,.*', '^hoperf,.*', '^hoperun,.*', '^hp,.*', '^hpe,.*', '^hsg,.*', '^htc,.*', '^huawei,.*', '^hugsun,.*', '^hwacom,.*', '^hxt,.*', '^hycon,.*', '^hydis,.*', '^hynitron,.*', '^hynix,.*', '^hyundai,.*', '^i2se,.*', '^ibm,.*', '^icplus,.*', '^idt,.*', '^iei,.*', '^ifi,.*', '^ilitek,.*', '^imagis,.*', '^img,.*', '^imi,.*', '^inanbo,.*', '^incircuit,.*', '^indiedroid,.*', '^inet-tek,.*', '^infineon,.*', '^inforce,.*', '^ingenic,.*', '^ingrasys,.*', '^injoinic,.*', '^innocomm,.*', '^innolux,.*', '^inside-secure,.*', '^insignal,.*', '^inspur,.*', '^intel,.*', '^intercontrol,.*', '^invensense,.*', '^inventec,.*', '^inversepath,.*', '^iom,.*', '^irondevice,.*', '^isee,.*', '^isil,.*', '^issi,.*', '^ite,.*', '^itead,.*', '^itian,.*', '^ivo,.*', '^iwave,.*', '^jadard,.*', '^jasonic,.*', '^jdi,.*', '^jedec,.*', '^jenson,.*', '^jesurun,.*', '^jethome,.*', '^jianda,.*', '^jide,.*', '^joz,.*', '^ka
m,.*', '^karo,.*', '^keithkoep,.*', '^keymile,.*', '^khadas,.*', '^kiebackpeter,.*', '^kinetic,.*', '^kingdisplay,.*', '^kingnovel,.*', '^kionix,.*', '^kobo,.*', '^kobol,.*', '^koe,.*', '^kontron,.*', '^kosagi,.*', '^kvg,.*', '^kyo,.*', '^lacie,.*', '^laird,.*', '^lamobo,.*', '^lantiq,.*', '^lattice,.*', '^lckfb,.*', '^lctech,.*', '^leadtek,.*', '^leez,.*', '^lego,.*', '^lemaker,.*', '^lenovo,.*', '^lg,.*', '^lgphilips,.*', '^libretech,.*', '^licheepi,.*', '^linaro,.*', '^lincolntech,.*', '^lineartechnology,.*', '^linksprite,.*', '^linksys,.*', '^linutronix,.*', '^linux,.*', '^linx,.*', '^liontron,.*', '^liteon,.*', '^litex,.*', '^lltc,.*', '^logicpd,.*', '^logictechno,.*', '^longcheer,.*', '^lontium,.*', '^loongmasses,.*', '^loongson,.*', '^lsi,.*', '^lunzn,.*', '^luxul,.*', '^lwn,.*', '^lxa,.*', '^m5stack,.*', '^macnica,.*', '^mantix,.*', '^mapleboard,.*', '^marantec,.*', '^marvell,.*', '^maxbotix,.*', '^maxim,.*', '^maxlinear,.*', '^mbvl,.*', '^mcube,.*', '^meas,.*', '^mecer,.*',
'^mediatek,.*', '^megachips,.*', '^mele,.*', '^melexis,.*', '^melfas,.*', '^mellanox,.*', '^memsensing,.*', '^memsic,.*', '^menlo,.*', '^mentor,.*', '^meraki,.*', '^merrii,.*', '^methode,.*', '^micrel,.*', '^microchip,.*', '^microcrystal,.*', '^micron,.*', '^microsoft,.*', '^microsys,.*', '^microtips,.*', '^mikroe,.*', '^mikrotik,.*', '^milkv,.*', '^miniand,.*', '^minix,.*', '^mips,.*', '^miramems,.*', '^mitsubishi,.*', '^mitsumi,.*', '^mixel,.*', '^miyoo,.*', '^mntre,.*', '^mobileye,.*', '^modtronix,.*', '^moortec,.*', '^mosaixtech,.*', '^motorcomm,.*', '^motorola,.*', '^moxa,.*', '^mpl,.*', '^mps,.*', '^mqmaker,.*', '^mrvl,.*', '^mscc,.*', '^msi,.*', '^mstar,.*', '^mti,.*', '^multi-inno,.*', '^mundoreader,.*', '^murata,.*', '^mxic,.*', '^mxicy,.*', '^myir,.*', '^national,.*', '^neardi,.*', '^nec,.*', '^neofidelity,.*', '^neonode,.*', '^netcube,.*', '^netgear,.*', '^netlogic,.*', '^netron-dy,.*', '^netronix,.*', '^netxeon,.*', '^neweast,.*', '^newhaven,.*', '^newvision,.*', '^nexb
ox,.*', '^nextthing,.*', '^ni,.*', '^nintendo,.*', '^nlt,.*', '^nokia,.*', '^nordic,.*', '^nothing,.*', '^novatek,.*', '^novtech,.*', '^numonyx,.*', '^nutsboard,.*', '^nuvoton,.*', '^nvd,.*', '^nvidia,.*', '^nxp,.*', '^oceanic,.*', '^ocs,.*', '^oct,.*', '^okaya,.*', '^oki,.*', '^olimex,.*', '^olpc,.*', '^oneplus,.*', '^onie,.*', '^onion,.*', '^onnn,.*', '^ontat,.*', '^opalkelly,.*', '^openailab,.*', '^opencores,.*', '^openembed,.*', '^openpandora,.*', '^openrisc,.*', '^openwrt,.*', '^option,.*', '^oranth,.*', '^orisetech,.*', '^ortustech,.*', '^osddisplays,.*', '^osmc,.*', '^ouya,.*', '^overkiz,.*', '^ovti,.*', '^oxsemi,.*', '^ozzmaker,.*', '^panasonic,.*', '^parade,.*', '^parallax,.*', '^pda,.*', '^pegatron,.*', '^pericom,.*', '^pervasive,.*', '^phicomm,.*', '^phytec,.*', '^picochip,.*', '^pinctrl-[0-9]+$', '^pine64,.*', '^pineriver,.*', '^pixcir,.*', '^plantower,.*', '^plathome,.*', '^plda,.*', '^plx,.*', '^ply,.*', '^pni,.*', '^pocketbook,.*', '^polaroid,.*', '^polyhex,.*', '^por
twell,.*', '^poslab,.*', '^pov,.*', '^powertip,.*', '^powervr,.*', '^powkiddy,.*', '^pri,.*', '^primeview,.*', '^primux,.*', '^probox2,.*', '^prt,.*', '^pulsedlight,.*', '^purism,.*', '^puya,.*', '^qca,.*', '^qcom,.*', '^qemu,.*', '^qi,.*', '^qiaodian,.*', '^qihua,.*', '^qishenglong,.*', '^qnap,.*', '^quanta,.*', '^radxa,.*', '^raidsonic,.*', '^ralink,.*', '^ramtron,.*', '^raspberrypi,.*', '^raydium,.*', '^rda,.*', '^realtek,.*', '^relfor,.*', '^remarkable,.*', '^renesas,.*', '^rervision,.*', '^retronix,.*', '^revotics,.*', '^rex,.*', '^richtek,.*', '^ricoh,.*', '^rikomagic,.*', '^riot,.*', '^riscv,.*', '^rockchip,.*', '^rocktech,.*', '^rohm,.*', '^ronbo,.*', '^roofull,.*', '^roseapplepi,.*', '^rve,.*', '^saef,.*', '^samsung,.*', '^samtec,.*', '^sancloud,.*', '^sandisk,.*', '^satoz,.*', '^sbs,.*', '^schindler,.*', '^schneider,.*', '^sciosense,.*', '^seagate,.*', '^seeed,.*', '^seirobotics,.*', '^semtech,.*', '^senseair,.*', '^sensirion,.*', '^sensortek,.*', '^sercomm,.*', '^sff,.*',
'^sgd,.*', '^sgmicro,.*', '^sgx,.*', '^sharp,.*', '^shift,.*', '^shimafuji,.*', '^shineworld,.*', '^shiratech,.*', '^si-en,.*', '^si-linux,.*', '^siemens,.*', '^sifive,.*', '^siflower,.*', '^sigma,.*', '^sii,.*', '^sil,.*', '^silabs,.*', '^silan,.*', '^silead,.*', '^silergy,.*', '^silex-insight,.*', '^siliconfile,.*', '^siliconmitus,.*', '^silvaco,.*', '^simtek,.*', '^sinlinx,.*', '^sinovoip,.*', '^sinowealth,.*', '^sipeed,.*', '^sirf,.*', '^sis,.*', '^sitronix,.*', '^skov,.*', '^skyworks,.*', '^smartlabs,.*', '^smartrg,.*', '^smi,.*', '^smsc,.*', '^snps,.*', '^sochip,.*', '^socionext,.*', '^solidrun,.*', '^solomon,.*', '^sony,.*', '^sophgo,.*', '^sourceparts,.*', '^spacemit,.*', '^spansion,.*', '^sparkfun,.*', '^spinalhdl,.*', '^sprd,.*', '^square,.*', '^ssi,.*', '^sst,.*', '^sstar,.*', '^st,.*', '^st-ericsson,.*', '^starfive,.*', '^starry,.*', '^startek,.*', '^starterkit,.*', '^ste,.*', '^stericsson,.*', '^storlink,.*', '^storm,.*', '^storopack,.*', '^summit,.*', '^sunchip,.*', '
^sundance,.*', '^sunplus,.*', '^supermicro,.*', '^swir,.*', '^syna,.*', '^synology,.*', '^synopsys,.*', '^tbs,.*', '^tbs-biometrics,.*', '^tcg,.*', '^tcl,.*', '^tcs,.*', '^tcu,.*', '^tdo,.*', '^team-source-display,.*', '^technexion,.*', '^technologic,.*', '^techstar,.*', '^techwell,.*', '^teejet,.*', '^teltonika,.*', '^tempo,.*', '^terasic,.*', '^tesla,.*', '^test,.*', '^tfc,.*', '^thead,.*', '^thine,.*', '^thingyjp,.*', '^thundercomm,.*', '^thwc,.*', '^ti,.*', '^tianma,.*', '^tlm,.*', '^tmt,.*', '^topeet,.*', '^topic,.*', '^topland,.*', '^toppoly,.*', '^topwise,.*', '^toradex,.*', '^toshiba,.*', '^toumaz,.*', '^tpk,.*', '^tplink,.*', '^tpo,.*', '^tq,.*', '^transpeed,.*', '^traverse,.*', '^tronfy,.*', '^tronsmart,.*', '^truly,.*', '^tsd,.*', '^turing,.*', '^tyan,.*', '^tyhx,.*', '^u-blox,.*', '^u-boot,.*', '^ubnt,.*', '^ucrobotics,.*', '^udoo,.*', '^ufispace,.*', '^ugoos,.*', '^uni-t,.*', '^uniwest,.*', '^upisemi,.*', '^urt,.*', '^usi,.*', '^usr,.*', '^utoo,.*', '^v3,.*', '^vaisala,
.*', '^vamrs,.*', '^variscite,.*', '^vdl,.*', '^vertexcom,.*', '^via,.*', '^vialab,.*', '^vicor,.*', '^videostrong,.*', '^virtio,.*', '^virtual,.*', '^vishay,.*', '^visionox,.*', '^vitesse,.*', '^vivante,.*', '^vivax,.*', '^vocore,.*', '^voipac,.*', '^voltafield,.*', '^vot,.*', '^vscom,.*', '^vxt,.*', '^wacom,.*', '^wanchanglong,.*', '^wand,.*', '^waveshare,.*', '^wd,.*', '^we,.*', '^welltech,.*', '^wetek,.*', '^wexler,.*', '^whwave,.*', '^wi2wi,.*', '^widora,.*', '^wiligear,.*', '^willsemi,.*', '^winbond,.*', '^wingtech,.*', '^winlink,.*', '^winsen,.*', '^winstar,.*', '^wirelesstag,.*', '^wits,.*', '^wlf,.*', '^wm,.*', '^wobo,.*', '^wolfvision,.*', '^x-powers,.*', '^xen,.*', '^xes,.*', '^xiaomi,.*', '^xillybus,.*', '^xingbangda,.*', '^xinpeng,.*', '^xiphera,.*', '^xlnx,.*', '^xnano,.*', '^xunlong,.*', '^xylon,.*', '^yadro,.*', '^yamaha,.*', '^yes-optoelectronics,.*', '^yic,.*', '^yiming,.*', '^ylm,.*', '^yna,.*', '^yones-toptech,.*', '^ys,.*', '^ysoft,.*', '^yuridenki,.*', '^yuzuki
hd,.*', '^zarlink,.*', '^zealz,.*', '^zeitec,.*', '^zidoo,.*', '^zii,.*', '^zinitix,.*', '^zkmagic,.*', '^zte,.*', '^zyxel,.*'
from schema $id: http://devicetree.org/schemas/vendor-prefixes.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e6e0000/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e780000/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop@80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@24 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@2c (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e780000/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e780000/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fan-controller@21 (maxim,max31790): '#address-cells', '#size-cells', 'channel@2', 'channel@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fan-controller@27 (maxim,max31790): '#address-cells', '#size-cells', 'channel@2', 'channel@5' do not match any of the regexes: '^fan-[0-9]+$', '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: i2c@400 (aspeed,ast2600-i2c-bus): Unevaluated properties are not allowed ('aspeed,hw-timeout-ms' was unexpected)
from schema $id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: ssif-bmc@10 (ssif-bmc): 'alert-gpios', 'timeout-ms' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/ssif-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e780000/serial@1e78e000: failed to match any schema with compatible: ['aspeed,ast2600-uart']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e790000/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fsi@1e79b100 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e790000/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e790000/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH V3 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC
2025-05-13 3:10 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC leo.jt.wang
` (3 preceding siblings ...)
2025-05-14 13:11 ` [PATCH " Rob Herring (Arm)
@ 2025-05-26 10:01 ` leo.jt.wang
2025-05-26 12:50 ` Krzysztof Kozlowski
4 siblings, 1 reply; 11+ messages in thread
From: leo.jt.wang @ 2025-05-26 10:01 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
george.kw.lee, leo.jt.wang
From: Leo Wang <leo.jt.wang@fii-foxconn.com>
Add linux device tree entry for Meta Clemente compute-tray
BMC using AST2600 SoC.
Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-facebook-clemente.dts | 1195 +++++++++++++++++
2 files changed, 1196 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index b3170fdd3096..9d0a465cbb36 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
aspeed-bmc-facebook-catalina.dtb \
+ aspeed-bmc-facebook-clemente.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-elbert.dtb \
aspeed-bmc-facebook-fuji.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 000000000000..63b5a13214f1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1195 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Clemente BMC";
+ compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ i2c16 = &i2c1mux0ch0;
+ i2c17 = &i2c1mux0ch1;
+ i2c18 = &i2c1mux0ch2;
+ i2c19 = &i2c1mux0ch3;
+ i2c20 = &i2c1mux0ch4;
+ i2c21 = &i2c1mux0ch5;
+ i2c22 = &i2c1mux0ch6;
+ i2c23 = &i2c1mux0ch7;
+ i2c24 = &i2c0mux0ch0;
+ i2c25 = &i2c0mux0ch1;
+ i2c26 = &i2c0mux0ch2;
+ i2c27 = &i2c0mux0ch3;
+ i2c28 = &i2c0mux1ch0;
+ i2c29 = &i2c0mux1ch1;
+ i2c30 = &i2c0mux1ch2;
+ i2c31 = &i2c0mux1ch3;
+ i2c32 = &i2c0mux2ch0;
+ i2c33 = &i2c0mux2ch1;
+ i2c34 = &i2c0mux2ch2;
+ i2c35 = &i2c0mux2ch3;
+ i2c36 = &i2c0mux3ch0;
+ i2c37 = &i2c0mux3ch1;
+ i2c38 = &i2c0mux3ch2;
+ i2c39 = &i2c0mux3ch3;
+ i2c40 = &i2c0mux4ch0;
+ i2c41 = &i2c0mux4ch1;
+ i2c42 = &i2c0mux4ch2;
+ i2c43 = &i2c0mux4ch3;
+ i2c44 = &i2c0mux5ch0;
+ i2c45 = &i2c0mux5ch1;
+ i2c46 = &i2c0mux5ch2;
+ i2c47 = &i2c0mux5ch3;
+ i2c48 = &i2c12mux0ch0;
+ i2c49 = &i2c12mux0ch1;
+ i2c50 = &i2c12mux0ch2;
+ i2c51 = &i2c12mux0ch3;
+ i2c52 = &i2c12mux0ch4;
+ i2c53 = &i2c12mux0ch5;
+ i2c54 = &i2c12mux0ch6;
+ i2c55 = &i2c12mux0ch7;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ spi1_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "bmc_ready_noled";
+ gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+
+ led-3 {
+ label = "bmc_ready_cpld_noled";
+ gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+ };
+
+ p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p2v5_bmc_aux";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>;
+ };
+ };
+
+};
+
+&udma {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi3_default>;
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi4_default>;
+ use-ncsi;
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // IOB0 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // IOB0 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux1ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux1ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 0 IOEXP
+ io_expander7: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux1ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux1ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@73 {
+ compatible = "nxp,pca9546";
+ reg = <0x73>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux2ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux2ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux2ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux2ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9546";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux3ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // IOB1 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux3ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux3ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // IOB1 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux3ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9546";
+ reg = <0x76>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux4ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux4ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 1 IOEXP
+ io_expander8: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux4ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux4ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux5ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux5ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux5ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux5ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ // HSC
+ power-monitor@12 {
+ compatible = "ti,lm5066i";
+ reg = <0x12>;
+ };
+
+ // HSC
+ power-monitor@14 {
+ compatible = "ti,lm5066i";
+ reg = <0x14>;
+ };
+
+ // HSC TEMP SENSOR
+ temperature-sensor@4a {
+ compatible = "ti,tmp461";
+ reg = <0x4a>;
+ };
+
+ // HSC FRU EEPROM
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+
+ // CPU0 Leak sensor MAX1363
+ Leak-sensor@34 {
+ compatible = "maxim,max1363";
+ reg = <0x34>;
+ };
+
+ // CPU1 Leak sensor MAX1363
+ Leak-sensor@35 {
+ compatible = "maxim,max1363";
+ reg = <0x35>;
+ };
+
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ power-sensor@22 {
+ compatible = "mps,mp5990";
+ reg = <0x22>;
+ };
+ };
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ i2c1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ fanctl0: fan-controller@21{
+ compatible = "maxim,max31790";
+ reg = <0x21>;
+ };
+ fanctl1: fan-controller@27{
+ compatible = "maxim,max31790";
+ reg = <0x27>;
+ };
+ };
+ i2c1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ i2c1mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ i2c1mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ // PDB FRU EEPROM
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
+ // PDB TEMP SENSOR
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+ };
+ i2c1mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+
+ // PDB IOEXP
+ io_expander5: gpio@27 {
+ compatible = "nxp,pca9554";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP IOEXP
+ io_expander6: gpio@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ i2c1mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+
+ // FIO FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ // FIO TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ // Module 0, Expander @0x20
+ io_expander0: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // Module 1, Expander @0x21
+ io_expander1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // HMC Expander @0x27
+ io_expander2: gpio@27 {
+ compatible = "nxp,pca9555";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // HMC Expander @0x74
+ io_expander3: gpio@74 {
+ compatible = "nxp,pca9555";
+ reg = <0x74>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // Module 0 Aux EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // Module 1 Aux EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ rtc@6f {
+ compatible = "nuvoton,nct3018y";
+ reg = <0x6f>;
+ };
+
+ // Interposer board EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+
+ // SCM CPLD IOEXP
+ io_expander4: gpio@4f {
+ compatible = "nxp,pca9555";
+ reg = <0x4f>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // SCM TEMP SENSOR BOARD
+ temperature-sensor@4b {
+ compatible = "national,lm75b";
+ reg = <0x4b>;
+ };
+
+ // SCM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // BSM FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ // OCP NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ multi-master;
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c12mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c12mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c12mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c12mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ i2c12mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ i2c12mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ i2c12mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ // HDD FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+ };
+ i2c12mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c13 {
+ status = "okay";
+ multi-master;
+
+ // HPM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ // CBC 0 FRU
+ eeprom@54 {
+ compatible = "atmel,24c02";
+ reg = <0x54>;
+ };
+ // CBC 1 FRU
+ eeprom@55 {
+ compatible = "atmel,24c02";
+ reg = <0x55>;
+ };
+ // CBC 2 FRU
+ eeprom@56 {
+ compatible = "atmel,24c02";
+ reg = <0x56>;
+ };
+ // CBC 3 FRU
+ eeprom@58 {
+ compatible = "atmel,24c02";
+ reg = <0x58>;
+ };
+ // HMC FRU EEPROM
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ // PDB CPLD IOEXP 0x10
+ io_expander9: gpio@10 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x10>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x11
+ io_expander10: gpio@11 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x12
+ io_expander11: gpio@12 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x13
+ io_expander12: gpio@13 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x14
+ io_expander13: gpio@14 {
+ compatible = "nxp,pca9555";
+ reg = <0x14>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ // OCP NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC1 FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+};
+
+&adc0 {
+ vref-supply = <&p1v8_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref-supply = <&p2v5_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&pinctrl {
+ pinctrl_ncsi3_default: ncsi3_default {
+ function = "RMII3";
+ groups = "NCSI3";
+ };
+
+ pinctrl_ncsi4_default: ncsi4_default {
+ function = "RMII4";
+ groups = "NCSI4";
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+ "BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+ "IOEXP_INT_L","FM_ID_LED",
+ "","",
+ /*C0-C7*/ "BMC_GPIOC0","","","",
+ "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+ "","BMC_I2C_SSIF_ALERT_L",
+ /*D0-D7*/ "","","","","BMC_GPIOD4","","","",
+ /*E0-E7*/ "BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","",
+ "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+ /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN",
+ "SHDN_FORCE_L","SHDN_REQ_L",
+ "","","","",
+ /*I0-I7*/ "","","","",
+ "","FLASH_WP_STATUS",
+ "FM_PDB_HEALTH_N","RUN_POWER_PG",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP",
+ "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+ "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+ /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1",
+ "LED_POSTCODE_2","LED_POSTCODE_3",
+ "LED_POSTCODE_4","LED_POSTCODE_5",
+ "LED_POSTCODE_6","LED_POSTCODE_7",
+ /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+ "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+ "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+ "","USBDBG_IPMI_EN_L",
+ /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+ "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+ "host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+ /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+ "UART_MUX_SEL","I2C_MUX_RESET_L",
+ "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+ "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+ /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+ "CPU_BOOT_DONE","PMBUS_GNT_L",
+ "CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+ "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+ /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+ "FM_BMC_DEBUG_SW_N","UID_LED_N",
+ "SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+ "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+ "SMB_BMC_TMP_ALERT","PWR_LED_N",
+ "SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","RST_BMC_SELF_HW",
+ "FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+ "BMC_GPIOY4","BMC_GPIOY5","","",
+ /*Z0-Z7*/ "","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "","","","","","","","",
+ /*18B0-18B3*/ "","","","",
+ /*18B4-18B7*/ "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+ /*18C0-18C7*/ "","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&io_expander0 {
+ gpio-line-names =
+ "FPGA_THERM_OVERT_L-I",
+ "FPGA_READY_BMC-I",
+ "HMC_BMC_DETECT-O",
+ "HMC_PGOOD-O",
+ "",
+ "BMC_STBY_CYCLE-O",
+ "FPGA_EROT_FATAL_ERROR_L-I",
+ "WP_HW_EXT_CTRL_L-O",
+ "EROT_FPGA_RST_L-O",
+ "FPGA_EROT_RECOVERY_L-O",
+ "BMC_EROT_FPGA_SPI_MUX_SEL-O",
+ "USB2_HUB_RST_L-O",
+ "",
+ "SGPIO_EN_L-O",
+ "B2B_IOEXP_INT_L-I",
+ "I2C_BUS_MUX_RESET_L-O";
+};
+
+&io_expander1 {
+ gpio-line-names =
+ "USB_MUX_SEL_N-O",
+ "",
+ "MCIO_PCIE_DISABLE_L-O",
+ "USB_PCIE_DISABLE_L-O",
+ "PEX_SW_PCIE_DISABLE_L-O",
+ "HSC_CARD_PRSNT_N-I",
+ "TPM_MUX_3V3_SEL_OUT_N-O",
+ "USB2_HUB4_RST_L-O",
+ "PCI_MUX_SEL-O",
+ "TPM_MUX_SEL-O",
+ "IOEXP_BMC_PHY_RST_N-O",
+ "IOEXP_RTC_CLR_L-O",
+ "BMC_12V_CTRL-O",
+ "PS_RUN_IO0_PG-I",
+ "",
+ "";
+};
+
+&io_expander2 {
+ gpio-line-names =
+ "HMC_PRSNT_L-I",
+ "HMC_READY-I",
+ "HMC_EROT_FATAL_ERROR_L-I",
+ "I2C_MUX_SEL-O",
+ "HMC_EROT_SPI_MUX_SEL-O",
+ "HMC_EROT_RECOVERY_L-O",
+ "HMC_EROT_RST_L-O",
+ "GLOBAL_WP_HMC-O",
+ "FPGA_RST_L-O",
+ "USB2_HUB_RST-O",
+ "CPU_UART_MUX_SEL-O",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&io_expander3 {
+ gpio-line-names =
+ "IOB_PRSNT_L",
+ "IOB_DP_HPD",
+ "IOX_BMC_RESET",
+ "IOB_IOEXP_INT_L",
+ "IOB_UID_LED_L",
+ "IOB_UID_BTN_L",
+ "IOB_SYS_RST_BTN_L",
+ "IOB_PWR_LED_L",
+ "IOB_PWR_BTN_L",
+ "IOB_PHY_RST",
+ "CPLD_JTAG_MUX_SEL",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&io_expander4 {
+ gpio-line-names =
+ "stby_power_en_cpld","stby_power_gd_cpld","","",
+ "","","","",
+ "","","","",
+ "","","","";
+};
+
+&io_expander5 {
+ gpio-line-names =
+ "JTAG_MUX_SEL","IOX_BMC_RESET","RTC_CLR_L","RTC_U77_ALRT_N",
+ "","PSU_ALERT_N","","RST_P12V_STBY_N";
+};
+
+&io_expander6 {
+ gpio-line-names =
+ "OSFP_PHASE_ID0","OSFP_PHASE_ID1",
+ "OSFP_PHASE_ID2","OSFP_PHASE_ID3",
+ "","","","",
+ "OSFP_BOARD_ID0","OSFP_BOARD_ID1",
+ "OSFP_BOARD_ID2","PWRGD_P3V3_N1",
+ "PWRGD_P3V3_N2","","","";
+};
+
+&io_expander7 {
+ gpio-line-names =
+ "RST_CX7_0","RST_CX7_1",
+ "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+ "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+ "CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+ "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+ "FNP_L_CX0","FNP_L_CX1",
+ "","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
+};
+
+&io_expander8 {
+ gpio-line-names =
+ "SEC_RST_CX7_0","SEC_RST_CX7_1",
+ "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+ "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+ "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+ "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+ "SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+ "","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
+};
+
+&io_expander9 {
+ gpio-line-names =
+ "wSequence_Latch_State_N","wP12V_N1N2_RUNTIME_FLT_N",
+ "wP12V_FAN_RUNTIME_FLT_N","wP12V_AUX_RUNTIME_FLT_N",
+ "wHost_PERST_SEQPWR_FLT_N","wP12V_N1N2_SEQPWR_FLT_N",
+ "wP12V_FAN_SEQPWR_FLT_N","wP12V_AUX_SEQPWR_FLT_N",
+ "wP12V_RUNTIME_FLT_NIC1_N","wAUX_RUNTIME_FLT_NIC1_N",
+ "wP12V_SEQPWR_FLT_NIC1_N","wAUX_SEQPWR_FLT_NIC1_N",
+ "wP12V_RUNTIME_FLT_NIC0_N","wAUX_RUNTIME_FLT_NIC0_N",
+ "wP12V_SEQPWR_FLT_NIC0_N","wAUX_SEQPWR_FLT_NIC0_N";
+};
+
+&io_expander10 {
+ gpio-line-names =
+ "FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
+ "FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
+ "P48V_HS2_FAULT_N_PLD","P48V_HS1_FAULT_N_PLD",
+ "P12V_AUX_FAN_OC_PLD_N","P12V_AUX_FAN_FAULT_PLD_N",
+ "","",
+ "","",
+ "","FM_SYS_THROTTLE_N",
+ "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+ "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+};
+
+&io_expander11 {
+ gpio-line-names =
+ "P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+ "P12V_AUX_NIC1_SENSE_ALERT_R_N","P12V_AUX_NIC0_SENSE_ALERT_R_N",
+ "NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
+ "P12V_AUX_FAN_ALERT_PLD_N","P52V_SENSE_ALERT_PLD_N",
+ "PRSNT_RJ45_FIO_N_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+ "CHASSIS3_LEAK_Q_N_PLD","CHASSIS2_LEAK_Q_N_PLD",
+ "CHASSIS1_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+ "","SMB_RJ45_FIO_TMP_ALERT";
+};
+
+&io_expander12 {
+ gpio-line-names =
+ "FAN_7_PRESENT_N","FAN_6_PRESENT_N",
+ "FAN_5_PRESENT_N","FAN_4_PRESENT_N",
+ "FAN_3_PRESENT_N","FAN_2_PRESENT_N",
+ "FAN_1_PRESENT_N","FAN_0_PRESENT_N",
+ "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+ "PRSNT_HDDBD_POWER_CABLE_N","PRSNT_OSFP0_POWER_CABLE_N",
+ "PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+ "PRSNT_CHASSIS1_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+};
+
+&io_expander13 {
+ gpio-line-names =
+ "rmc_en_dc_pwr_on","",
+ "","",
+ "","",
+ "","",
+ "leak_config_0","leak_config_1",
+ "leak_config_2","leak_config_3",
+ "mfg_led_test_mode_l","small_leak_err_inj",
+ "large_leak_err_inj","";
+};
+
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH V3 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC
2025-05-26 10:01 ` [PATCH V3 " leo.jt.wang
@ 2025-05-26 12:50 ` Krzysztof Kozlowski
2025-05-27 15:11 ` [PATCH v4 " leo.jt.wang
2025-05-27 17:56 ` [PATCH V3 " Rob Herring (Arm)
0 siblings, 2 replies; 11+ messages in thread
From: Krzysztof Kozlowski @ 2025-05-26 12:50 UTC (permalink / raw)
To: leo.jt.wang, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Joel Stanley, Andrew Jeffery
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
george.kw.lee, leo.jt.wang
On 26/05/2025 12:01, leo.jt.wang@gmail.com wrote:
> From: Leo Wang <leo.jt.wang@fii-foxconn.com>
>
> Add linux device tree entry for Meta Clemente compute-tray
> BMC using AST2600 SoC.
>
> Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
> ---
> arch/arm/boot/dts/aspeed/Makefile | 1 +
> .../aspeed/aspeed-bmc-facebook-clemente.dts | 1195 +++++++++++++++++
> 2 files changed, 1196 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
>
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index b3170fdd3096..9d0a465cbb36 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-delta-ahe50dc.dtb \
> aspeed-bmc-facebook-bletchley.dtb \
> aspeed-bmc-facebook-catalina.dtb \
> + aspeed-bmc-facebook-clemente.dtb \
> aspeed-bmc-facebook-cmm.dtb \
> aspeed-bmc-facebook-elbert.dtb \
> aspeed-bmc-facebook-fuji.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
> new file mode 100644
> index 000000000000..63b5a13214f1
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
> @@ -0,0 +1,1195 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2021 Facebook Inc.
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/usb/pd.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/ {
> + model = "Facebook Clemente BMC";
> + compatible = "facebook,clemente-bmc", "aspeed,ast2600";
Missing bindings.
Or your threading is broken because I did not receive 1/2.
Just in case:
Please version your patches (entire patchset!) correctly, e.g. use b4 or
git format-patch -vX, and add changelog in cover letter or under '---'
of individual patches describing changes from previous version.
Do not attach (thread) your patchsets to some other threads (unrelated
or older versions). This buries them deep in the mailbox and might
interfere with applying entire sets.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v4 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC
2025-05-26 12:50 ` Krzysztof Kozlowski
@ 2025-05-27 15:11 ` leo.jt.wang
2025-05-27 17:56 ` [PATCH V3 " Rob Herring (Arm)
1 sibling, 0 replies; 11+ messages in thread
From: leo.jt.wang @ 2025-05-27 15:11 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
george.kw.lee, leo.jt.wang
From: Leo Wang <leo.jt.wang@fii-foxconn.com>
Add linux device tree entry for Meta Clemente compute-tray
BMC using AST2600 SoC.
Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-facebook-clemente.dts | 1195 +++++++++++++++++
2 files changed, 1196 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index b3170fdd3096..9d0a465cbb36 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
aspeed-bmc-facebook-catalina.dtb \
+ aspeed-bmc-facebook-clemente.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-elbert.dtb \
aspeed-bmc-facebook-fuji.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 000000000000..63b5a13214f1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1195 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Clemente BMC";
+ compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ i2c16 = &i2c1mux0ch0;
+ i2c17 = &i2c1mux0ch1;
+ i2c18 = &i2c1mux0ch2;
+ i2c19 = &i2c1mux0ch3;
+ i2c20 = &i2c1mux0ch4;
+ i2c21 = &i2c1mux0ch5;
+ i2c22 = &i2c1mux0ch6;
+ i2c23 = &i2c1mux0ch7;
+ i2c24 = &i2c0mux0ch0;
+ i2c25 = &i2c0mux0ch1;
+ i2c26 = &i2c0mux0ch2;
+ i2c27 = &i2c0mux0ch3;
+ i2c28 = &i2c0mux1ch0;
+ i2c29 = &i2c0mux1ch1;
+ i2c30 = &i2c0mux1ch2;
+ i2c31 = &i2c0mux1ch3;
+ i2c32 = &i2c0mux2ch0;
+ i2c33 = &i2c0mux2ch1;
+ i2c34 = &i2c0mux2ch2;
+ i2c35 = &i2c0mux2ch3;
+ i2c36 = &i2c0mux3ch0;
+ i2c37 = &i2c0mux3ch1;
+ i2c38 = &i2c0mux3ch2;
+ i2c39 = &i2c0mux3ch3;
+ i2c40 = &i2c0mux4ch0;
+ i2c41 = &i2c0mux4ch1;
+ i2c42 = &i2c0mux4ch2;
+ i2c43 = &i2c0mux4ch3;
+ i2c44 = &i2c0mux5ch0;
+ i2c45 = &i2c0mux5ch1;
+ i2c46 = &i2c0mux5ch2;
+ i2c47 = &i2c0mux5ch3;
+ i2c48 = &i2c12mux0ch0;
+ i2c49 = &i2c12mux0ch1;
+ i2c50 = &i2c12mux0ch2;
+ i2c51 = &i2c12mux0ch3;
+ i2c52 = &i2c12mux0ch4;
+ i2c53 = &i2c12mux0ch5;
+ i2c54 = &i2c12mux0ch6;
+ i2c55 = &i2c12mux0ch7;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ spi1_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "bmc_ready_noled";
+ gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+
+ led-3 {
+ label = "bmc_ready_cpld_noled";
+ gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+ };
+
+ p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p2v5_bmc_aux";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>;
+ };
+ };
+
+};
+
+&udma {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi3_default>;
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi4_default>;
+ use-ncsi;
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // IOB0 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // IOB0 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux1ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux1ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 0 IOEXP
+ io_expander7: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux1ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux1ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@73 {
+ compatible = "nxp,pca9546";
+ reg = <0x73>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux2ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux2ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux2ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux2ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9546";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux3ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // IOB1 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux3ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux3ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // IOB1 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux3ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9546";
+ reg = <0x76>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux4ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux4ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 1 IOEXP
+ io_expander8: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ i2c0mux4ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux4ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux5ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux5ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux5ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux5ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ // HSC
+ power-monitor@12 {
+ compatible = "ti,lm5066i";
+ reg = <0x12>;
+ };
+
+ // HSC
+ power-monitor@14 {
+ compatible = "ti,lm5066i";
+ reg = <0x14>;
+ };
+
+ // HSC TEMP SENSOR
+ temperature-sensor@4a {
+ compatible = "ti,tmp461";
+ reg = <0x4a>;
+ };
+
+ // HSC FRU EEPROM
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ };
+
+ // CPU0 Leak sensor MAX1363
+ Leak-sensor@34 {
+ compatible = "maxim,max1363";
+ reg = <0x34>;
+ };
+
+ // CPU1 Leak sensor MAX1363
+ Leak-sensor@35 {
+ compatible = "maxim,max1363";
+ reg = <0x35>;
+ };
+
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ power-sensor@22 {
+ compatible = "mps,mp5990";
+ reg = <0x22>;
+ };
+ };
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ i2c1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ fanctl0: fan-controller@21{
+ compatible = "maxim,max31790";
+ reg = <0x21>;
+ };
+ fanctl1: fan-controller@27{
+ compatible = "maxim,max31790";
+ reg = <0x27>;
+ };
+ };
+ i2c1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ i2c1mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ i2c1mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ // PDB FRU EEPROM
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+
+ // PDB TEMP SENSOR
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+ };
+ i2c1mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+
+ // PDB IOEXP
+ io_expander5: gpio@27 {
+ compatible = "nxp,pca9554";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP IOEXP
+ io_expander6: gpio@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // OSFP FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ i2c1mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+
+ // FIO FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ // FIO TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ // Module 0, Expander @0x20
+ io_expander0: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // Module 1, Expander @0x21
+ io_expander1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // HMC Expander @0x27
+ io_expander2: gpio@27 {
+ compatible = "nxp,pca9555";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // HMC Expander @0x74
+ io_expander3: gpio@74 {
+ compatible = "nxp,pca9555";
+ reg = <0x74>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // Module 0 Aux EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // Module 1 Aux EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ rtc@6f {
+ compatible = "nuvoton,nct3018y";
+ reg = <0x6f>;
+ };
+
+ // Interposer board EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+
+ // SCM CPLD IOEXP
+ io_expander4: gpio@4f {
+ compatible = "nxp,pca9555";
+ reg = <0x4f>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // SCM TEMP SENSOR BOARD
+ temperature-sensor@4b {
+ compatible = "national,lm75b";
+ reg = <0x4b>;
+ };
+
+ // SCM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // BSM FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ // OCP NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ multi-master;
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c12mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c12mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c12mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c12mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ i2c12mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ i2c12mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ i2c12mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ // HDD FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+ };
+ i2c12mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c13 {
+ status = "okay";
+ multi-master;
+
+ // HPM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ // CBC 0 FRU
+ eeprom@54 {
+ compatible = "atmel,24c02";
+ reg = <0x54>;
+ };
+ // CBC 1 FRU
+ eeprom@55 {
+ compatible = "atmel,24c02";
+ reg = <0x55>;
+ };
+ // CBC 2 FRU
+ eeprom@56 {
+ compatible = "atmel,24c02";
+ reg = <0x56>;
+ };
+ // CBC 3 FRU
+ eeprom@58 {
+ compatible = "atmel,24c02";
+ reg = <0x58>;
+ };
+ // HMC FRU EEPROM
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ // PDB CPLD IOEXP 0x10
+ io_expander9: gpio@10 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x10>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x11
+ io_expander10: gpio@11 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x12
+ io_expander11: gpio@12 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x13
+ io_expander12: gpio@13 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x14
+ io_expander13: gpio@14 {
+ compatible = "nxp,pca9555";
+ reg = <0x14>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ // OCP NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC1 FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+};
+
+&adc0 {
+ vref-supply = <&p1v8_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref-supply = <&p2v5_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&pinctrl {
+ pinctrl_ncsi3_default: ncsi3_default {
+ function = "RMII3";
+ groups = "NCSI3";
+ };
+
+ pinctrl_ncsi4_default: ncsi4_default {
+ function = "RMII4";
+ groups = "NCSI4";
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+ "BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+ "IOEXP_INT_L","FM_ID_LED",
+ "","",
+ /*C0-C7*/ "BMC_GPIOC0","","","",
+ "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+ "","BMC_I2C_SSIF_ALERT_L",
+ /*D0-D7*/ "","","","","BMC_GPIOD4","","","",
+ /*E0-E7*/ "BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","",
+ "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+ /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN",
+ "SHDN_FORCE_L","SHDN_REQ_L",
+ "","","","",
+ /*I0-I7*/ "","","","",
+ "","FLASH_WP_STATUS",
+ "FM_PDB_HEALTH_N","RUN_POWER_PG",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP",
+ "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+ "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+ /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1",
+ "LED_POSTCODE_2","LED_POSTCODE_3",
+ "LED_POSTCODE_4","LED_POSTCODE_5",
+ "LED_POSTCODE_6","LED_POSTCODE_7",
+ /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+ "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+ "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+ "","USBDBG_IPMI_EN_L",
+ /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+ "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+ "host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+ /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+ "UART_MUX_SEL","I2C_MUX_RESET_L",
+ "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+ "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+ /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+ "CPU_BOOT_DONE","PMBUS_GNT_L",
+ "CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+ "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+ /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+ "FM_BMC_DEBUG_SW_N","UID_LED_N",
+ "SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+ "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+ "SMB_BMC_TMP_ALERT","PWR_LED_N",
+ "SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","RST_BMC_SELF_HW",
+ "FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+ "BMC_GPIOY4","BMC_GPIOY5","","",
+ /*Z0-Z7*/ "","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "","","","","","","","",
+ /*18B0-18B3*/ "","","","",
+ /*18B4-18B7*/ "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+ /*18C0-18C7*/ "","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&io_expander0 {
+ gpio-line-names =
+ "FPGA_THERM_OVERT_L-I",
+ "FPGA_READY_BMC-I",
+ "HMC_BMC_DETECT-O",
+ "HMC_PGOOD-O",
+ "",
+ "BMC_STBY_CYCLE-O",
+ "FPGA_EROT_FATAL_ERROR_L-I",
+ "WP_HW_EXT_CTRL_L-O",
+ "EROT_FPGA_RST_L-O",
+ "FPGA_EROT_RECOVERY_L-O",
+ "BMC_EROT_FPGA_SPI_MUX_SEL-O",
+ "USB2_HUB_RST_L-O",
+ "",
+ "SGPIO_EN_L-O",
+ "B2B_IOEXP_INT_L-I",
+ "I2C_BUS_MUX_RESET_L-O";
+};
+
+&io_expander1 {
+ gpio-line-names =
+ "USB_MUX_SEL_N-O",
+ "",
+ "MCIO_PCIE_DISABLE_L-O",
+ "USB_PCIE_DISABLE_L-O",
+ "PEX_SW_PCIE_DISABLE_L-O",
+ "HSC_CARD_PRSNT_N-I",
+ "TPM_MUX_3V3_SEL_OUT_N-O",
+ "USB2_HUB4_RST_L-O",
+ "PCI_MUX_SEL-O",
+ "TPM_MUX_SEL-O",
+ "IOEXP_BMC_PHY_RST_N-O",
+ "IOEXP_RTC_CLR_L-O",
+ "BMC_12V_CTRL-O",
+ "PS_RUN_IO0_PG-I",
+ "",
+ "";
+};
+
+&io_expander2 {
+ gpio-line-names =
+ "HMC_PRSNT_L-I",
+ "HMC_READY-I",
+ "HMC_EROT_FATAL_ERROR_L-I",
+ "I2C_MUX_SEL-O",
+ "HMC_EROT_SPI_MUX_SEL-O",
+ "HMC_EROT_RECOVERY_L-O",
+ "HMC_EROT_RST_L-O",
+ "GLOBAL_WP_HMC-O",
+ "FPGA_RST_L-O",
+ "USB2_HUB_RST-O",
+ "CPU_UART_MUX_SEL-O",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&io_expander3 {
+ gpio-line-names =
+ "IOB_PRSNT_L",
+ "IOB_DP_HPD",
+ "IOX_BMC_RESET",
+ "IOB_IOEXP_INT_L",
+ "IOB_UID_LED_L",
+ "IOB_UID_BTN_L",
+ "IOB_SYS_RST_BTN_L",
+ "IOB_PWR_LED_L",
+ "IOB_PWR_BTN_L",
+ "IOB_PHY_RST",
+ "CPLD_JTAG_MUX_SEL",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&io_expander4 {
+ gpio-line-names =
+ "stby_power_en_cpld","stby_power_gd_cpld","","",
+ "","","","",
+ "","","","",
+ "","","","";
+};
+
+&io_expander5 {
+ gpio-line-names =
+ "JTAG_MUX_SEL","IOX_BMC_RESET","RTC_CLR_L","RTC_U77_ALRT_N",
+ "","PSU_ALERT_N","","RST_P12V_STBY_N";
+};
+
+&io_expander6 {
+ gpio-line-names =
+ "OSFP_PHASE_ID0","OSFP_PHASE_ID1",
+ "OSFP_PHASE_ID2","OSFP_PHASE_ID3",
+ "","","","",
+ "OSFP_BOARD_ID0","OSFP_BOARD_ID1",
+ "OSFP_BOARD_ID2","PWRGD_P3V3_N1",
+ "PWRGD_P3V3_N2","","","";
+};
+
+&io_expander7 {
+ gpio-line-names =
+ "RST_CX7_0","RST_CX7_1",
+ "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+ "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+ "CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+ "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+ "FNP_L_CX0","FNP_L_CX1",
+ "","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
+};
+
+&io_expander8 {
+ gpio-line-names =
+ "SEC_RST_CX7_0","SEC_RST_CX7_1",
+ "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+ "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+ "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+ "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+ "SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+ "","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
+};
+
+&io_expander9 {
+ gpio-line-names =
+ "wSequence_Latch_State_N","wP12V_N1N2_RUNTIME_FLT_N",
+ "wP12V_FAN_RUNTIME_FLT_N","wP12V_AUX_RUNTIME_FLT_N",
+ "wHost_PERST_SEQPWR_FLT_N","wP12V_N1N2_SEQPWR_FLT_N",
+ "wP12V_FAN_SEQPWR_FLT_N","wP12V_AUX_SEQPWR_FLT_N",
+ "wP12V_RUNTIME_FLT_NIC1_N","wAUX_RUNTIME_FLT_NIC1_N",
+ "wP12V_SEQPWR_FLT_NIC1_N","wAUX_SEQPWR_FLT_NIC1_N",
+ "wP12V_RUNTIME_FLT_NIC0_N","wAUX_RUNTIME_FLT_NIC0_N",
+ "wP12V_SEQPWR_FLT_NIC0_N","wAUX_SEQPWR_FLT_NIC0_N";
+};
+
+&io_expander10 {
+ gpio-line-names =
+ "FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
+ "FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
+ "P48V_HS2_FAULT_N_PLD","P48V_HS1_FAULT_N_PLD",
+ "P12V_AUX_FAN_OC_PLD_N","P12V_AUX_FAN_FAULT_PLD_N",
+ "","",
+ "","",
+ "","FM_SYS_THROTTLE_N",
+ "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+ "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+};
+
+&io_expander11 {
+ gpio-line-names =
+ "P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+ "P12V_AUX_NIC1_SENSE_ALERT_R_N","P12V_AUX_NIC0_SENSE_ALERT_R_N",
+ "NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
+ "P12V_AUX_FAN_ALERT_PLD_N","P52V_SENSE_ALERT_PLD_N",
+ "PRSNT_RJ45_FIO_N_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+ "CHASSIS3_LEAK_Q_N_PLD","CHASSIS2_LEAK_Q_N_PLD",
+ "CHASSIS1_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+ "","SMB_RJ45_FIO_TMP_ALERT";
+};
+
+&io_expander12 {
+ gpio-line-names =
+ "FAN_7_PRESENT_N","FAN_6_PRESENT_N",
+ "FAN_5_PRESENT_N","FAN_4_PRESENT_N",
+ "FAN_3_PRESENT_N","FAN_2_PRESENT_N",
+ "FAN_1_PRESENT_N","FAN_0_PRESENT_N",
+ "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+ "PRSNT_HDDBD_POWER_CABLE_N","PRSNT_OSFP0_POWER_CABLE_N",
+ "PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+ "PRSNT_CHASSIS1_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+};
+
+&io_expander13 {
+ gpio-line-names =
+ "rmc_en_dc_pwr_on","",
+ "","",
+ "","",
+ "","",
+ "leak_config_0","leak_config_1",
+ "leak_config_2","leak_config_3",
+ "mfg_led_test_mode_l","small_leak_err_inj",
+ "large_leak_err_inj","";
+};
+
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH V3 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC
2025-05-26 12:50 ` Krzysztof Kozlowski
2025-05-27 15:11 ` [PATCH v4 " leo.jt.wang
@ 2025-05-27 17:56 ` Rob Herring (Arm)
1 sibling, 0 replies; 11+ messages in thread
From: Rob Herring (Arm) @ 2025-05-27 17:56 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Krzysztof Kozlowski, george.kw.lee, leo.jt.wang, Andrew Jeffery,
linux-arm-kernel, linux-aspeed, linux-kernel, leo.jt.wang,
Joel Stanley, Conor Dooley, devicetree
On Mon, 26 May 2025 14:50:24 +0200, Krzysztof Kozlowski wrote:
> On 26/05/2025 12:01, leo.jt.wang@gmail.com wrote:
> > From: Leo Wang <leo.jt.wang@fii-foxconn.com>
> >
> > Add linux device tree entry for Meta Clemente compute-tray
> > BMC using AST2600 SoC.
> >
> > Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
> > ---
> > arch/arm/boot/dts/aspeed/Makefile | 1 +
> > .../aspeed/aspeed-bmc-facebook-clemente.dts | 1195 +++++++++++++++++
> > 2 files changed, 1196 insertions(+)
> > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
> >
> > diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> > index b3170fdd3096..9d0a465cbb36 100644
> > --- a/arch/arm/boot/dts/aspeed/Makefile
> > +++ b/arch/arm/boot/dts/aspeed/Makefile
> > @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> > aspeed-bmc-delta-ahe50dc.dtb \
> > aspeed-bmc-facebook-bletchley.dtb \
> > aspeed-bmc-facebook-catalina.dtb \
> > + aspeed-bmc-facebook-clemente.dtb \
> > aspeed-bmc-facebook-cmm.dtb \
> > aspeed-bmc-facebook-elbert.dtb \
> > aspeed-bmc-facebook-fuji.dtb \
> > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
> > new file mode 100644
> > index 000000000000..63b5a13214f1
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
> > @@ -0,0 +1,1195 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +// Copyright (c) 2021 Facebook Inc.
> > +/dts-v1/;
> > +
> > +#include "aspeed-g6.dtsi"
> > +#include <dt-bindings/gpio/aspeed-gpio.h>
> > +#include <dt-bindings/usb/pd.h>
> > +#include <dt-bindings/leds/leds-pca955x.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/i2c/i2c.h>
> > +
> > +/ {
> > + model = "Facebook Clemente BMC";
> > + compatible = "facebook,clemente-bmc", "aspeed,ast2600";
> Missing bindings.
>
> Or your threading is broken because I did not receive 1/2.
>
> Just in case:
>
> Please version your patches (entire patchset!) correctly, e.g. use b4 or
> git format-patch -vX, and add changelog in cover letter or under '---'
> of individual patches describing changes from previous version.
>
> Do not attach (thread) your patchsets to some other threads (unrelated
> or older versions). This buries them deep in the mailbox and might
> interfere with applying entire sets.
>
> Best regards,
> Krzysztof
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: tags/next-20250527 (exact match)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for c5e16072-e6de-4256-b0e2-3b45e420f0c4@kernel.org:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: / (facebook,clemente-bmc): compatible: 'oneOf' conditional failed, one must be fixed:
'facebook,clemente-bmc' is not one of ['delta,ahe50dc-bmc', 'facebook,galaxy100-bmc', 'facebook,wedge100-bmc', 'facebook,wedge40-bmc', 'microsoft,olympus-bmc', 'quanta,q71l-bmc', 'tyan,palmetto-bmc', 'yadro,vesnin-bmc']
'facebook,clemente-bmc' is not one of ['amd,daytonax-bmc', 'amd,ethanolx-bmc', 'ampere,mtjade-bmc', 'aspeed,ast2500-evb', 'asrock,e3c246d4i-bmc', 'asrock,e3c256d4i-bmc', 'asrock,romed8hm3-bmc', 'asrock,spc621d8hm3-bmc', 'asrock,x570d4u-bmc', 'bytedance,g220a-bmc', 'facebook,cmm-bmc', 'facebook,minipack-bmc', 'facebook,tiogapass-bmc', 'facebook,yamp-bmc', 'facebook,yosemitev2-bmc', 'facebook,wedge400-bmc', 'hxt,stardragon4800-rep2-bmc', 'ibm,mihawk-bmc', 'ibm,mowgli-bmc', 'ibm,romulus-bmc', 'ibm,swift-bmc', 'ibm,witherspoon-bmc', 'ingrasys,zaius-bmc', 'inspur,fp5280g2-bmc', 'inspur,nf5280m6-bmc', 'inspur,on5263m5-bmc', 'intel,s2600wf-bmc', 'inventec,lanyang-bmc', 'lenovo,hr630-bmc', 'lenovo,hr855xg2-bmc', 'portwell,neptune-bmc', 'qcom,centriq2400-rep-bmc', 'supermicro,x11spi-bmc', 'tyan,s7106-bmc', 'tyan,s8036-bmc', 'yadro,nicole-bmc', 'yadro,vegman-n110-bmc', 'yadro,vegman-rx20-bmc', 'yadro,vegman-sx20-bmc']
'facebook,clemente-bmc' is not one of ['ampere,mtjefferson-bmc', 'ampere,mtmitchell-bmc', 'aspeed,ast2600-evb', 'aspeed,ast2600-evb-a1', 'asus,x4tf-bmc', 'facebook,bletchley-bmc', 'facebook,catalina-bmc', 'facebook,cloudripper-bmc', 'facebook,elbert-bmc', 'facebook,fuji-bmc', 'facebook,greatlakes-bmc', 'facebook,harma-bmc', 'facebook,minerva-cmc', 'facebook,yosemite4-bmc', 'ibm,blueridge-bmc', 'ibm,everest-bmc', 'ibm,fuji-bmc', 'ibm,rainier-bmc', 'ibm,sbp1-bmc', 'ibm,system1-bmc', 'ibm,tacoma-bmc', 'inventec,starscream-bmc', 'inventec,transformer-bmc', 'jabil,rbp-bmc', 'nvidia,gb200nvl-bmc', 'qcom,dc-scm-v1-bmc', 'quanta,s6q-bmc', 'ufispace,ncplite-bmc']
'aspeed,ast2400' was expected
'aspeed,ast2500' was expected
from schema $id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /: failed to match any schema with compatible: ['facebook,clemente-bmc', 'aspeed,ast2600']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e6e0000/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e780000/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop@80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@24 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@2c (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: kcs@114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e780000/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e780000/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e790000/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: fsi@1e79b100 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e790000/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: /ahb/apb@1e790000/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v3 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC
2025-06-23 10:29 [PATCH v3 0/2] ARM: dts: Add support for " Leo Wang
@ 2025-06-23 10:29 ` Leo Wang
2025-06-24 23:48 ` Andrew Jeffery
0 siblings, 1 reply; 11+ messages in thread
From: Leo Wang @ 2025-06-23 10:29 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, Kees Cook, Tony Luck, Guilherme G. Piccoli,
Geert Uytterhoeven, Magnus Damm
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
linux-hardening, linux-renesas-soc, bruce.jy.hung, george.kw.lee,
Leo Wang, Leo Wang
From: Leo Wang <leo.jt.wang@gmail.com>
Add linux device tree entry for Meta Clemente compute-tray
BMC using AST2600 SoC.
Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-facebook-clemente.dts | 1254 ++++++++++++++++++++
2 files changed, 1255 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 2e5f4833a073b6c25190fd4b6e89a11f9636fc84..904503f78f960d7bc14cad7cb455bb8bb3138ccd 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
aspeed-bmc-facebook-catalina.dtb \
+ aspeed-bmc-facebook-clemente.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-elbert.dtb \
aspeed-bmc-facebook-fuji.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 0000000000000000000000000000000000000000..10b49f0261bf847258a00c56b3be0a65ae4677f2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1254 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Clemente BMC";
+ compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ i2c16 = &i2c1mux0ch0;
+ i2c17 = &i2c1mux0ch1;
+ i2c18 = &i2c1mux0ch2;
+ i2c19 = &i2c1mux0ch3;
+ i2c20 = &i2c1mux0ch4;
+ i2c21 = &i2c1mux0ch5;
+ i2c22 = &i2c1mux0ch6;
+ i2c23 = &i2c1mux0ch7;
+ i2c24 = &i2c0mux0ch0;
+ i2c25 = &i2c0mux0ch1;
+ i2c26 = &i2c0mux0ch2;
+ i2c27 = &i2c0mux0ch3;
+ i2c28 = &i2c0mux1ch0;
+ i2c29 = &i2c0mux1ch1;
+ i2c30 = &i2c0mux1ch2;
+ i2c31 = &i2c0mux1ch3;
+ i2c32 = &i2c0mux2ch0;
+ i2c33 = &i2c0mux2ch1;
+ i2c34 = &i2c0mux2ch2;
+ i2c35 = &i2c0mux2ch3;
+ i2c36 = &i2c0mux3ch0;
+ i2c37 = &i2c0mux3ch1;
+ i2c38 = &i2c0mux3ch2;
+ i2c39 = &i2c0mux3ch3;
+ i2c40 = &i2c0mux4ch0;
+ i2c41 = &i2c0mux4ch1;
+ i2c42 = &i2c0mux4ch2;
+ i2c43 = &i2c0mux4ch3;
+ i2c44 = &i2c0mux5ch0;
+ i2c45 = &i2c0mux5ch1;
+ i2c46 = &i2c0mux5ch2;
+ i2c47 = &i2c0mux5ch3;
+ i2c48 = &i2c0mux0ch1mux0ch0;
+ i2c49 = &i2c0mux0ch1mux0ch1;
+ i2c50 = &i2c0mux0ch1mux0ch2;
+ i2c51 = &i2c0mux0ch1mux0ch3;
+ i2c52 = &i2c0mux3ch1mux0ch0;
+ i2c53 = &i2c0mux3ch1mux0ch1;
+ i2c54 = &i2c0mux3ch1mux0ch2;
+ i2c55 = &i2c0mux3ch1mux0ch3;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ spi1_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "bmc_ready_noled";
+ gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+
+ led-3 {
+ label = "bmc_ready_cpld_noled";
+ gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+ };
+
+ p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p2v5_bmc_aux";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ramoops@b3e00000 {
+ compatible = "ramoops";
+ reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>;
+ };
+ };
+
+};
+
+&adc0 {
+ vref-supply = <&p1v8_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ vref-supply = <&p2v5_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+ "BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+ "IOEXP_INT_L","FM_ID_LED",
+ "","",
+ /*C0-C7*/ "BMC_GPIOC0","","","",
+ "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+ "","BMC_I2C_SSIF_ALERT_L",
+ /*D0-D7*/ "","","","","BMC_GPIOD4","","","",
+ /*E0-E7*/ "BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","",
+ "FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+ /*H0-H7*/ "PWR_BRAKE_L","RUN_POWER_EN",
+ "SHDN_FORCE_L","SHDN_REQ_L",
+ "","","","",
+ /*I0-I7*/ "","","","",
+ "","FLASH_WP_STATUS",
+ "FM_PDB_HEALTH_N","RUN_POWER_PG",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP",
+ "SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+ "STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+ /*N0-N7*/ "LED_POSTCODE_0","LED_POSTCODE_1",
+ "LED_POSTCODE_2","LED_POSTCODE_3",
+ "LED_POSTCODE_4","LED_POSTCODE_5",
+ "LED_POSTCODE_6","LED_POSTCODE_7",
+ /*O0-O7*/ "HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+ "CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+ "PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+ "","USBDBG_IPMI_EN_L",
+ /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+ "ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+ "host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+ /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+ "UART_MUX_SEL","I2C_MUX_RESET_L",
+ "RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+ "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+ /*R0-R7*/ "THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+ "CPU_BOOT_DONE","PMBUS_GNT_L",
+ "CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+ "PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+ /*S0-S7*/ "","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+ "FM_BMC_DEBUG_SW_N","UID_LED_N",
+ "SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+ "BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+ "SMB_BMC_TMP_ALERT","PWR_LED_N",
+ "SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","RST_BMC_SELF_HW",
+ "FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+ "BMC_GPIOY4","BMC_GPIOY5","","",
+ /*Z0-Z7*/ "","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "","","","","","","","",
+ /*18B0-18B3*/ "","","","",
+ /*18B4-18B7*/ "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+ /*18C0-18C7*/ "","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // IOB0 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // HDD FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+
+ // E1.S Backplane
+ i2c0mux0ch1mux0: i2c-mux@74 {
+ compatible = "nxp,pca9546";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux0ch1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux0ch1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux0ch1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux0ch1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+ i2c0mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // IOB0 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux1ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux1ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 0 IOEXP
+ io_expander7: gpio@20 {
+ compatible = "nxp,pca9535";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // OSFP 0 FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+ };
+ i2c0mux1ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux1ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@73 {
+ compatible = "nxp,pca9546";
+ reg = <0x73>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux2ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux2ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux2ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux2ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@75 {
+ compatible = "nxp,pca9546";
+ reg = <0x75>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux3ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // IOB1 NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux3ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // E1.S Backplane HDD FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+
+ // E1.S Backplane MUX
+ i2c0mux3ch1mux0: i2c-mux@74 {
+ compatible = "nxp,pca9546";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux3ch1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux3ch1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux3ch1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux3ch1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+ i2c0mux3ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ // IOB1 NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ i2c0mux3ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9546";
+ reg = <0x76>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux4ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux4ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ // IO Mezz 1 IOEXP
+ io_expander8: gpio@21 {
+ compatible = "nxp,pca9535";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // IO Mezz 1 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // OSFP 1 FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+ };
+ i2c0mux4ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux4ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9546";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c0mux5ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c0mux5ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c0mux5ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c0mux5ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ // PDB
+ power-monitor@12 {
+ compatible = "ti,lm5066i";
+ reg = <0x12>;
+ };
+
+ // PDB
+ power-monitor@14 {
+ compatible = "ti,lm5066i";
+ reg = <0x14>;
+ };
+
+ // Module 0
+ fanctl0: fan-controller@20{
+ compatible = "maxim,max31790";
+ reg = <0x20>;
+ };
+
+ // Module 0
+ fanctl1: fan-controller@23{
+ compatible = "maxim,max31790";
+ reg = <0x23>;
+ };
+
+ // Module 1
+ fanctl2: fan-controller@2c{
+ compatible = "maxim,max31790";
+ reg = <0x2c>;
+ };
+
+ // Module 1
+ fanctl3: fan-controller@2f{
+ compatible = "maxim,max31790";
+ reg = <0x2f>;
+ };
+
+ // Module 0 Leak Sensor
+ adc@34 {
+ compatible = "maxim,max1363";
+ reg = <0x34>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ ti,gain = <2>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ ti,gain = <2>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ ti,gain = <2>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ ti,gain = <2>;
+ };
+ };
+
+ // Module 1 Leak Sensor
+ adc@35 {
+ compatible = "maxim,max1363";
+ reg = <0x35>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ ti,gain = <2>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ ti,gain = <2>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ ti,gain = <2>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ ti,gain = <2>;
+ };
+ };
+
+// PDB TEMP SENSOR
+ temperature-sensor@4e {
+ compatible = "ti,tmp1075";
+ reg = <0x4e>;
+ };
+
+ // PDB FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+
+ // PDB
+ vrm@60 {
+ compatible = "renesas,raa228004";
+ reg = <0x60>;
+ };
+
+ // PDB
+ vrm@61 {
+ compatible = "renesas,raa228004";
+ reg = <0x61>;
+ };
+
+ // Interposer
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ };
+ i2c1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ };
+ i2c1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+ };
+ i2c1mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>;
+ };
+ i2c1mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x5>;
+
+ // Interposer TEMP SENSOR
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+
+ // Interposer FRU EEPROM
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ };
+ };
+ i2c1mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x6>;
+
+ // Interposer IOEXP
+ io_expander5: gpio@27 {
+ compatible = "nxp,pca9554";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ i2c1mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7>;
+
+ // FIO TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ // FIO FRU EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ // Module 0, Expander @0x20
+ io_expander0: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // Module 1, Expander @0x21
+ io_expander1: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // HMC Expander @0x27
+ io_expander2: gpio@27 {
+ compatible = "nxp,pca9555";
+ reg = <0x27>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // Module 0 Aux EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // Module 1 Aux EEPROM
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+ io_expander3: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc@6f {
+ compatible = "nuvoton,nct3018y";
+ reg = <0x6f>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+ // SCM TEMP SENSOR BOARD
+ temperature-sensor@4b {
+ compatible = "national,lm75b";
+ reg = <0x4b>;
+ };
+
+ // SCM CPLD IOEXP
+ io_expander4: gpio@4f {
+ compatible = "nxp,pca9555";
+ reg = <0x4f>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // SCM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ // BSM FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+ // OCP NIC0 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC0 FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ multi-master;
+};
+
+&i2c13 {
+ status = "okay";
+ multi-master;
+
+ // HPM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ // CBC 0 FRU
+ eeprom@54 {
+ compatible = "atmel,24c02";
+ reg = <0x54>;
+ };
+ // CBC 1 FRU
+ eeprom@55 {
+ compatible = "atmel,24c02";
+ reg = <0x55>;
+ };
+ // CBC 2 FRU
+ eeprom@56 {
+ compatible = "atmel,24c02";
+ reg = <0x56>;
+ };
+ // HMC FRU EEPROM
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ };
+ // CBC 3 FRU
+ eeprom@58 {
+ compatible = "atmel,24c02";
+ reg = <0x58>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ // PDB CPLD IOEXP 0x10
+ io_expander9: gpio@10 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x10>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x11
+ io_expander10: gpio@11 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x12
+ io_expander11: gpio@12 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x12>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x13
+ io_expander12: gpio@13 {
+ compatible = "nxp,pca9555";
+ interrupt-parent = <&gpio0>;
+ interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x13>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ // PDB CPLD IOEXP 0x14
+ io_expander13: gpio@14 {
+ compatible = "nxp,pca9555";
+ reg = <0x14>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&i2c15 {
+ status = "okay";
+
+ // OCP NIC1 TEMP
+ temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC1 FRU EEPROM
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+};
+
+
+&io_expander0 {
+ gpio-line-names =
+ "FPGA_THERM_OVERT_L-I",
+ "FPGA_READY_BMC-I",
+ "HMC_BMC_DETECT-O",
+ "HMC_PGOOD-O",
+ "",
+ "BMC_STBY_CYCLE-O",
+ "FPGA_EROT_FATAL_ERROR_L-I",
+ "WP_HW_EXT_CTRL_L-O",
+ "EROT_FPGA_RST_L-O",
+ "FPGA_EROT_RECOVERY_L-O",
+ "BMC_EROT_FPGA_SPI_MUX_SEL-O",
+ "USB2_HUB_RST_L-O",
+ "",
+ "SGPIO_EN_L-O",
+ "B2B_IOEXP_INT_L-I",
+ "I2C_BUS_MUX_RESET_L-O";
+};
+
+&io_expander1 {
+ gpio-line-names =
+ "SEC_FPGA_THERM_OVERT_L",
+ "SEC_FPGA_READY_BMC",
+ "SEC_HMC_BMC_DETECT",
+ "SEC_HMC_PGOOD",
+ "",
+ "SEC_BMC_SELF_POWER_CYCLE",
+ "SEC_SEC_FPGA_EROT_FATAL_ERROR_L",
+ "SEC_WP_HW_EXT_CTRL_L",
+ "SEC_EROT_FPGA_RST_L",
+ "SEC_FPGA_EROT_RECOVERY_L",
+ "SEC_BMC_EROT_FPGA_SPI_MUX_SEL",
+ "SEC_USB2_HUB_RST_L",
+ "",
+ "SEC_SGPIO_EN_L",
+ "SEC_IOB_IOEXP_INT_L",
+ "SEC_I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander2 {
+ gpio-line-names =
+ "HMC_PRSNT_L-I",
+ "HMC_READY-I",
+ "HMC_EROT_FATAL_ERROR_L-I",
+ "I2C_MUX_SEL-O",
+ "HMC_EROT_SPI_MUX_SEL-O",
+ "HMC_EROT_RECOVERY_L-O",
+ "HMC_EROT_RST_L-O",
+ "GLOBAL_WP_HMC-O",
+ "FPGA_RST_L-O",
+ "USB2_HUB_RST-O",
+ "CPU_UART_MUX_SEL-O",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&io_expander3 {
+ gpio-line-names =
+ "RTC_MUX_SEL",
+ "PCI_MUX_SEL",
+ "TPM_MUX_SEL",
+ "FAN_MUX-SEL",
+ "SGMII_MUX_SEL",
+ "DP_MUX_SEL",
+ "UPHY3_USB_SEL",
+ "NCSI_MUX_SEL",
+ "BMC_PHY_RST",
+ "RTC_CLR_L",
+ "BMC_12V_CTRL",
+ "PS_RUN_IO0_PG",
+ "",
+ "",
+ "",
+ "";
+};
+
+&io_expander4 {
+ gpio-line-names =
+ "stby_power_en_cpld","stby_power_gd_cpld","","",
+ "","","","",
+ "","","","",
+ "","","","";
+};
+
+&io_expander5 {
+ gpio-line-names =
+ "JTAG_MUX_SEL","IOX_BMC_RESET","RTC_CLR_L","RTC_U77_ALRT_N",
+ "","PSU_ALERT_N","","RST_P12V_STBY_N";
+};
+
+&io_expander7 {
+ gpio-line-names =
+ "RST_CX7_0","RST_CX7_1",
+ "CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+ "CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+ "CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+ "CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+ "FNP_L_CX0","FNP_L_CX1",
+ "","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
+};
+
+&io_expander8 {
+ gpio-line-names =
+ "SEC_RST_CX7_0","SEC_RST_CX7_1",
+ "SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+ "SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+ "SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+ "SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+ "SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+ "","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
+};
+
+&io_expander9 {
+ gpio-line-names =
+ "wSequence_Latch_State_N","wP12V_N1N2_RUNTIME_FLT_N",
+ "wP12V_FAN_RUNTIME_FLT_N","wP12V_AUX_RUNTIME_FLT_N",
+ "wHost_PERST_SEQPWR_FLT_N","wP12V_N1N2_SEQPWR_FLT_N",
+ "wP12V_FAN_SEQPWR_FLT_N","wP12V_AUX_SEQPWR_FLT_N",
+ "wP12V_RUNTIME_FLT_NIC1_N","wAUX_RUNTIME_FLT_NIC1_N",
+ "wP12V_SEQPWR_FLT_NIC1_N","wAUX_SEQPWR_FLT_NIC1_N",
+ "wP12V_RUNTIME_FLT_NIC0_N","wAUX_RUNTIME_FLT_NIC0_N",
+ "wP12V_SEQPWR_FLT_NIC0_N","wAUX_SEQPWR_FLT_NIC0_N";
+};
+
+&io_expander10 {
+ gpio-line-names =
+ "FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
+ "FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
+ "P48V_HS2_FAULT_N_PLD","P48V_HS1_FAULT_N_PLD",
+ "P12V_AUX_FAN_OC_PLD_N","P12V_AUX_FAN_FAULT_PLD_N",
+ "","",
+ "","",
+ "","FM_SYS_THROTTLE_N",
+ "OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+ "OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+};
+
+&io_expander11 {
+ gpio-line-names =
+ "P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+ "P12V_AUX_NIC1_SENSE_ALERT_R_N","P12V_AUX_NIC0_SENSE_ALERT_R_N",
+ "NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
+ "P12V_AUX_FAN_ALERT_PLD_N","P52V_SENSE_ALERT_PLD_N",
+ "PRSNT_RJ45_FIO_N_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+ "CHASSIS3_LEAK_Q_N_PLD","CHASSIS2_LEAK_Q_N_PLD",
+ "CHASSIS1_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+ "","SMB_RJ45_FIO_TMP_ALERT";
+};
+
+&io_expander12 {
+ gpio-line-names =
+ "FAN_7_PRESENT_N","FAN_6_PRESENT_N",
+ "FAN_5_PRESENT_N","FAN_4_PRESENT_N",
+ "FAN_3_PRESENT_N","FAN_2_PRESENT_N",
+ "FAN_1_PRESENT_N","FAN_0_PRESENT_N",
+ "HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+ "PRSNT_HDDBD_POWER_CABLE_N","PRSNT_OSFP0_POWER_CABLE_N",
+ "PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+ "PRSNT_CHASSIS1_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+};
+
+&io_expander13 {
+ gpio-line-names =
+ "rmc_en_dc_pwr_on","",
+ "","",
+ "","",
+ "","",
+ "leak_config_0","leak_config_1",
+ "leak_config_2","leak_config_3",
+ "mfg_led_test_mode_l","small_leak_err_inj",
+ "large_leak_err_inj","";
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi3_default>;
+ use-ncsi;
+};
+
+&mac3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ncsi4_default>;
+ use-ncsi;
+};
+
+&pinctrl {
+ pinctrl_ncsi3_default: ncsi3_default {
+ function = "RMII3";
+ groups = "NCSI3";
+ };
+
+ pinctrl_ncsi4_default: ncsi4_default {
+ function = "RMII4";
+ groups = "NCSI4";
+ };
+};
+
+&udma {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v3 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC
2025-06-23 10:29 ` [PATCH v3 2/2] ARM: dts: aspeed: clemente: add " Leo Wang
@ 2025-06-24 23:48 ` Andrew Jeffery
0 siblings, 0 replies; 11+ messages in thread
From: Andrew Jeffery @ 2025-06-24 23:48 UTC (permalink / raw)
To: Leo Wang, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Joel Stanley, Kees Cook, Tony Luck, Guilherme G. Piccoli,
Geert Uytterhoeven, Magnus Damm
Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
linux-hardening, linux-renesas-soc, bruce.jy.hung, george.kw.lee,
Leo Wang
On Mon, 2025-06-23 at 18:29 +0800, Leo Wang wrote:
> From: Leo Wang <leo.jt.wang@gmail.com>
>
> Add linux device tree entry for Meta Clemente compute-tray
> BMC using AST2600 SoC.
>
> Signed-off-by: Leo Wang <leo.jt.wang@fii-foxconn.com>
Sorry, I missed that there was a v3. I left some comments on v2 that
are still applicable on brief inspection:
https://lore.kernel.org/all/0f495eec39fd25d71a59a56876f6142e6fe786f3.camel@codeconstruct.com.au/
Andrew
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2025-06-24 23:48 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20250513031010.267994-1-LeoWang>
2025-05-13 3:10 ` [PATCH 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC leo.jt.wang
2025-05-13 7:44 ` Krzysztof Kozlowski
2025-05-13 12:38 ` Andrew Lunn
2025-05-14 6:45 ` [PATCH V2 " leo.jt.wang
2025-05-14 13:11 ` [PATCH " Rob Herring (Arm)
2025-05-26 10:01 ` [PATCH V3 " leo.jt.wang
2025-05-26 12:50 ` Krzysztof Kozlowski
2025-05-27 15:11 ` [PATCH v4 " leo.jt.wang
2025-05-27 17:56 ` [PATCH V3 " Rob Herring (Arm)
2025-06-23 10:29 [PATCH v3 0/2] ARM: dts: Add support for " Leo Wang
2025-06-23 10:29 ` [PATCH v3 2/2] ARM: dts: aspeed: clemente: add " Leo Wang
2025-06-24 23:48 ` Andrew Jeffery
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).