* [PATCH v8 0/2] Add Meta(Facebook) Ventura BMC(AST2600)
@ 2025-06-11 11:26 Jason Hsu
2025-06-11 11:26 ` [PATCH v8 1/2] dt-bindings: arm: aspeed: add Meta Ventura board Jason Hsu
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Jason Hsu @ 2025-06-11 11:26 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, joel, andrew, patrick, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel
Cc: yang.chen, jerry.lin, Jason Hsu
Add Linux device tree entry related to Meta(Facebook) Ventura specific
devices connected to BMC(AST2600) SoC.
---
v1:
1. Create ventura dts file.
2. Add commit msg.
3. Use format-patch to generate patch.
4. Add subject prefixes matching the subsystem.
---
v2:
1. Modify email content.
---
v3:
1. Add mail list.
---
v4:
1. Apply git send-email --thread option.
2. Sort nodes in the dts alphanumerically.
---
v5:
1. Run scripts/checkpatch.pl and fix reported warnings.
2. Remove unnecessary 88E6393X CONFIG FRU.
---
v6:
1. Add a new stage for the DTS change.
2. Run scripts/checkpatch.pl and fix reported error.
3. Fix the issue in a separate patch.
---
v7:
1. Fix broken indentation in the device tree file.
2. Sort nodes alphabetically, then by address if equal.
3. Rename fan sensor nodes from 'hwmon' to 'fan-controller'.
---
v8:
1. This patch series has significant changes compared to
previous versions, and quite some time has passed since the last
submission.Therefore, previously received Acked-by/Reviewed-by/Tested-by
tags are not included in this version.
If needed, tags can be added again after review of thisnew version.
---
Signed-off-by: Jason Hsu <jasonhell19@gmail.com>
Jason Hsu (2):
dt-bindings: arm: aspeed: add Meta Ventura board
ARM: dts: aspeed: ventura: add Meta Ventura BMC
.../bindings/arm/aspeed/aspeed.yaml | 1 +
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-facebook-ventura.dts | 1481 +++++++++++++++++
3 files changed, 1483 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
--
2.34.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v8 1/2] dt-bindings: arm: aspeed: add Meta Ventura board
2025-06-11 11:26 [PATCH v8 0/2] Add Meta(Facebook) Ventura BMC(AST2600) Jason Hsu
@ 2025-06-11 11:26 ` Jason Hsu
2025-06-11 11:26 ` [PATCH v8 2/2] ARM: dts: aspeed: ventura: add Meta Ventura BMC Jason Hsu
2025-06-11 13:11 ` [PATCH v8 0/2] Add Meta(Facebook) Ventura BMC(AST2600) Rob Herring (Arm)
2 siblings, 0 replies; 5+ messages in thread
From: Jason Hsu @ 2025-06-11 11:26 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, joel, andrew, patrick, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel
Cc: yang.chen, jerry.lin, Jason Hsu
Document the new compatibles used on Meta Ventura.
Signed-off-by: Jason Hsu <jasonhell19@gmail.com>
---
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 01333ac111fb..a86b411df9a5 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -87,6 +87,7 @@ properties:
- facebook,greatlakes-bmc
- facebook,harma-bmc
- facebook,minerva-cmc
+ - facebook,ventura-rmc
- facebook,yosemite4-bmc
- ibm,blueridge-bmc
- ibm,everest-bmc
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v8 2/2] ARM: dts: aspeed: ventura: add Meta Ventura BMC
2025-06-11 11:26 [PATCH v8 0/2] Add Meta(Facebook) Ventura BMC(AST2600) Jason Hsu
2025-06-11 11:26 ` [PATCH v8 1/2] dt-bindings: arm: aspeed: add Meta Ventura board Jason Hsu
@ 2025-06-11 11:26 ` Jason Hsu
2025-06-13 0:52 ` Andrew Jeffery
2025-06-11 13:11 ` [PATCH v8 0/2] Add Meta(Facebook) Ventura BMC(AST2600) Rob Herring (Arm)
2 siblings, 1 reply; 5+ messages in thread
From: Jason Hsu @ 2025-06-11 11:26 UTC (permalink / raw)
To: robh, krzk+dt, conor+dt, joel, andrew, patrick, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel
Cc: yang.chen, jerry.lin, Jason Hsu
Add Linux device tree related to Meta(Facebook) Ventura specific
devices connected to BMC(AST2600) SoC.
Signed-off-by: Jason Hsu <jasonhell19@gmail.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-facebook-ventura.dts | 1481 +++++++++++++++++
2 files changed, 1482 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 2e5f4833a073..e07666d902fb 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-minerva.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
+ aspeed-bmc-facebook-ventura.dtb \
aspeed-bmc-facebook-wedge40.dtb \
aspeed-bmc-facebook-wedge100.dtb \
aspeed-bmc-facebook-wedge400.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
new file mode 100644
index 000000000000..34a3ef3a0efe
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
@@ -0,0 +1,1481 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2023 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Facebook ventura RMC";
+ compatible = "facebook,ventura-rmc", "aspeed,ast2600";
+
+ aliases {
+ serial4 = &uart5;
+ i2c16 = &i2c3mux0ch3;
+ i2c17 = &i2c3mux0ch4;
+ i2c18 = &i2c3mux0ch5;
+ i2c19 = &i2c3mux0ch6;
+ i2c20 = &i2c3mux0ch0;
+ i2c21 = &i2c3mux0ch1;
+ i2c22 = &i2c3mux0ch2;
+ i2c23 = &i2c3mux0ch7;
+ i2c24 = &i2c0mux0ch0;
+ i2c25 = &i2c0mux0ch1;
+ i2c26 = &i2c0mux0ch2;
+ i2c27 = &i2c0mux0ch3;
+ i2c28 = &i2c0mux0ch4;
+ i2c29 = &i2c0mux0ch5;
+ i2c30 = &i2c0mux0ch6;
+ i2c31 = &i2c0mux0ch7;
+ i2c32 = &i2c1mux0ch0;
+ i2c33 = &i2c1mux0ch1;
+ i2c34 = &i2c1mux0ch2;
+ i2c35 = &i2c1mux0ch3;
+ i2c36 = &i2c1mux0ch4;
+ i2c37 = &i2c1mux0ch5;
+ i2c38 = &i2c1mux0ch6;
+ i2c39 = &i2c1mux0ch7;
+ i2c40 = &i2c2mux0ch0;
+ i2c41 = &i2c2mux0ch1;
+ i2c42 = &i2c2mux0ch2;
+ i2c43 = &i2c2mux0ch3;
+ i2c44 = &i2c2mux0ch4;
+ i2c45 = &i2c2mux0ch5;
+ i2c46 = &i2c2mux0ch6;
+ i2c47 = &i2c2mux0ch7;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "bmc_ready_noled";
+ default-state = "on";
+ gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+ };
+
+ led-3 {
+ label = "power_blue";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-4 {
+ label = "compute1_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g5_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-5 {
+ label = "compute1_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-6 {
+ label = "compute1_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-7 {
+ label = "compute2_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-8 {
+ label = "compute2_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-9 {
+ label = "compute2_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-10 {
+ label = "compute3_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-11 {
+ label = "compute3_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-12 {
+ label = "compute3_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-13 {
+ label = "compute4_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-14 {
+ label = "compute4_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-15 {
+ label = "compute4_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-16 {
+ label = "compute5_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-17 {
+ label = "compute5_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-18 {
+ label = "compute5_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-19 {
+ label = "compute6_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-20 {
+ label = "compute6_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-21 {
+ label = "compute6_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-22 {
+ label = "compute7_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-23 {
+ label = "compute7_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led-24 {
+ label = "compute7_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led-25 {
+ label = "compute8_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-26 {
+ label = "compute8_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-27 {
+ label = "compute8_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-28 {
+ label = "nvs1_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-29 {
+ label = "nvs1_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-30 {
+ label = "nvs1_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-31 {
+ label = "nvs2_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led-32 {
+ label = "nvs2_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led-33 {
+ label = "nvs2_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-34 {
+ label = "nvs3_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-35 {
+ label = "nvs3_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-36 {
+ label = "nvs3_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g4_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-37 {
+ label = "nvs4_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-38 {
+ label = "nvs4_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-39 {
+ label = "nvs4_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-40 {
+ label = "nvs5_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-41 {
+ label = "nvs5_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-42 {
+ label = "nvs5_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-43 {
+ label = "nvs6_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-44 {
+ label = "nvs6_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-45 {
+ label = "nvs6_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-46 {
+ label = "nvs7_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-47 {
+ label = "nvs7_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-48 {
+ label = "nvs7_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g3_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-49 {
+ label = "nvs8_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-50 {
+ label = "nvs8_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-51 {
+ label = "nvs8_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led-52 {
+ label = "nvs9_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led-53 {
+ label = "nvs9_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-54 {
+ label = "nvs9_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-55 {
+ label = "compute9_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-56 {
+ label = "compute9_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-57 {
+ label = "compute9_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-58 {
+ label = "compute10_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-59 {
+ label = "compute10_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-60 {
+ label = "compute10_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-61 {
+ label = "compute11_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-62 {
+ label = "compute11_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-63 {
+ label = "compute11_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-64 {
+ label = "compute12_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led-65 {
+ label = "compute12_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-66 {
+ label = "compute12_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g6_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-67 {
+ label = "compute13_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ led-68 {
+ label = "compute13_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led-69 {
+ label = "compute13_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-70 {
+ label = "compute14_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-71 {
+ label = "compute14_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led-72 {
+ label = "compute14_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led-73 {
+ label = "compute15_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-74 {
+ label = "compute15_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led-75 {
+ label = "compute15_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led-76 {
+ label = "compute16_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ led-77 {
+ label = "compute16_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led-78 {
+ label = "compute16_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g2_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led-79 {
+ label = "compute17_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-80 {
+ label = "compute17_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-81 {
+ label = "compute17_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led-82 {
+ label = "compute18_led_switch";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led-83 {
+ label = "compute18_led_blue";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-84 {
+ label = "compute18_led_amber";
+ default-state = "off";
+ gpios = <&tray_leds_g1_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-85 {
+ label = "fan0_ledd1_blue";
+ default-state = "off";
+ gpios = <&fan_leds_g1_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-86 {
+ label = "fan0_ledd2_blue";
+ default-state = "off";
+ gpios = <&fan_leds_g1_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-87 {
+ label = "fan0_ledd1_amber";
+ default-state = "off";
+ gpios = <&fan_leds_g1_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-88 {
+ label = "fan0_ledd2_amber";
+ default-state = "off";
+ gpios = <&fan_leds_g1_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led-89 {
+ label = "fan1_ledd1_blue";
+ default-state = "off";
+ gpios = <&fan_leds_g2_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led-90 {
+ label = "fan1_ledd2_blue";
+ default-state = "off";
+ gpios = <&fan_leds_g2_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led-91 {
+ label = "fan1_ledd1_amber";
+ default-state = "off";
+ gpios = <&fan_leds_g2_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led-92 {
+ label = "fan1_ledd2_amber";
+ default-state = "off";
+ gpios = <&fan_leds_g2_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p1v8_bmc_aux";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p2v5_bmc_aux";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ spi1_gpio: spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&adc0 {
+ vref-supply = <&p1v8_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+
+};
+
+&adc1 {
+ vref-supply = <&p2v5_bmc_aux>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "BATTERY_DETECT","","","BMC_READY","","","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","","","","","","USBDBG_IPMI_EN_L",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","FM_MDIO_SW_SEL","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c0mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "okay";
+ };
+
+ i2c0mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "okay";
+ };
+
+ i2c0mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ status = "okay";
+ };
+
+ i2c0mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ status = "okay";
+ };
+
+ i2c0mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ status = "okay";
+ };
+
+ i2c0mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ status = "okay";
+ };
+
+ i2c0mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ status = "okay";
+ };
+
+ i2c0mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ status = "okay";
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "okay";
+ };
+
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "okay";
+ };
+
+ i2c1mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ status = "okay";
+ };
+
+ i2c1mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ status = "okay";
+ };
+
+ i2c1mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ status = "okay";
+ };
+
+ i2c1mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ status = "okay";
+ };
+
+ i2c1mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ status = "okay";
+ };
+
+ i2c1mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ status = "okay";
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c2mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "okay";
+ };
+
+ i2c2mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "okay";
+ };
+
+ i2c2mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ status = "okay";
+ };
+
+ i2c2mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ status = "okay";
+ };
+
+ i2c2mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ status = "okay";
+ };
+
+ i2c2mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ status = "okay";
+ };
+
+ i2c2mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ status = "okay";
+ };
+
+ i2c2mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ status = "okay";
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c3mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ status = "okay";
+ };
+
+ i2c3mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ status = "okay";
+ };
+
+ i2c3mux0ch2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ status = "okay";
+ };
+
+ i2c3mux0ch3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ adc@1f {
+ compatible = "ti,adc128d818";
+ reg = <0x1f>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ adc@35 {
+ compatible = "maxim,max11617";
+ reg = <0x35>;
+ };
+
+ // Fan Board 0 FRU
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+
+ fan_leds_g1_gpio: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "", "",
+ "", "",
+ "", "",
+ "", "",
+ "FAN0_PRSNT", "FAN1_PRSNT",
+ "", "",
+ "", "",
+ "", "";
+ };
+ };
+
+ i2c3mux0ch4: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ adc@1f {
+ compatible = "ti,adc128d818";
+ reg = <0x1f>;
+ ti,mode = /bits/ 8 <1>;
+ };
+
+ adc@35 {
+ compatible = "maxim,max11617";
+ reg = <0x35>;
+ };
+
+ // Fan Board 1 FRU
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+
+ fan_leds_g2_gpio: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "", "",
+ "", "",
+ "", "",
+ "", "",
+ "FAN2_PRSNT", "FAN3_PRSNT",
+ "", "",
+ "", "",
+ "", "";
+ };
+ };
+
+ i2c3mux0ch5: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ fancontroller: fancontroller@23 {
+ compatible = "nuvoton,nct7363";
+ reg = <0x23>;
+ #pwm-cells = <2>;
+
+ //fan 0 IL
+ fan-0 {
+ pwms = <&fancontroller 0 20000>;
+ tach-ch = /bits/ 8 <0x09>;
+ };
+
+ //fan 0 OL
+ fan-1 {
+ pwms = <&fancontroller 0 20000>;
+ tach-ch = /bits/ 8 <0x0B>;
+ };
+
+ //fan 1 IL
+ fan-2 {
+ pwms = <&fancontroller 4 20000>;
+ tach-ch = /bits/ 8 <0x0A>;
+ };
+
+ //fan 1 OL
+ fan-3 {
+ pwms = <&fancontroller 4 20000>;
+ tach-ch = /bits/ 8 <0x0D>;
+ };
+
+ //fan 2 IL
+ fan-4 {
+ pwms = <&fancontroller 6 20000>;
+ tach-ch = /bits/ 8 <0x0F>;
+ };
+
+ //fan 2 OL
+ fan-5 {
+ pwms = <&fancontroller 6 20000>;
+ tach-ch = /bits/ 8 <0x01>;
+ };
+
+ //fan 3 IL
+ fan-6 {
+ pwms = <&fancontroller 10 20000>;
+ tach-ch = /bits/ 8 <0x00>;
+ };
+
+ //fan 3 OL
+ fan-7 {
+ pwms = <&fancontroller 10 20000>;
+ tach-ch = /bits/ 8 <0x03>;
+ };
+ };
+ };
+
+ i2c3mux0ch6: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ // REAR-IO Board FRU
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+ };
+
+ i2c3mux0ch7: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ status = "okay";
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+
+ // RMC FRU
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+ // VR TEMP U399
+ temperature-sensor@4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+ // VR TEMP U397
+ temperature-sensor@4d {
+ compatible = "ti,tmp75";
+ reg = <0x4d>;
+ };
+ // BRICK TEMP U398
+ temperature-sensor@4e {
+ compatible = "ti,tmp75";
+ reg = <0x4e>;
+ };
+
+ temperature-sensor@4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ bus-frequency = <100000>;
+ multi-master;
+ aspeed,hw-timeout-ms = <1000>;
+
+ //USB Debug Connector
+ ipmb@10 {
+ compatible = "ipmb-dev";
+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+ i2c-protocol;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ // SCM FRU EEPROM
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ // BSM FRU EEPROM
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+
+ // SCM TEMP SENSOR
+ temperature-sensor@4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ power-monitor@14 {
+ compatible = "infineon,xdp710";
+ reg = <0x14>;
+ };
+
+ power-monitor@44 {
+ compatible = "lltc,ltc4286";
+ reg = <0x44>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+
+ // LED Board FRU
+ eeprom@56 {
+ compatible = "atmel,24c128";
+ reg = <0x56>;
+ };
+
+ tray_leds_g1_gpio: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tray_leds_g2_gpio: gpio@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tray_leds_g3_gpio: gpio@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tray_leds_g4_gpio: gpio@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tray_leds_g5_gpio: gpio@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ tray_leds_g6_gpio: gpio@26 {
+ compatible = "nxp,pca9555";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&mac3 {
+ status = "okay";
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+};
+
+&sgpiom0 {
+ status = "okay";
+ ngpios = <128>;
+ bus-frequency = <2000000>;
+};
+
+&sgpiom0 {
+ gpio-line-names =
+ /*"input pin","output pin"*/
+ /*A0 - A7*/
+ "power-chassis-good","power-chassis-control",
+ "host0-ready","WATER_VALVE_CLOSED_N",
+ "wPRSNT_RETURN_PLD_R_N","FM_MDIO_SW_SEL_PLD",
+ "wPRSNT_SUPPLY_PLD_R_N","FM_88E6393X_BIN_UPDATE_EN_N",
+ "LEAK3_DETECT","",
+ "LEAK4_DETECT","",
+ "RETURN_CNTL_FB_D_R","",
+ "SUPPLY_CNTL_FB_D_R","",
+ /*B0 - B7*/
+ "IT_STOP_PUMP_SPARE_2","",
+ "IT_STOP_PUMP_2","",
+ "IT_STOP_PUMP_SPARE","",
+ "IT_STOP_PUMP","",
+ "RPU_2_READY_SPARE_PLD_R","",
+ "RPU_2_READY_PLD_R","",
+ "RPU_READY_SPARE_PLD_R","",
+ "RPU_READY_PLD_R","",
+ /*C0 - C7*/
+ "wAALC_RPU_READY","",
+ "LEAK0_DETECT","",
+ "LEAK1_DETECT","",
+ "LEAK2_DETECT","",
+ "PRSNT_COMPUTE_TRAY1_N","",
+ "PRSNT_COMPUTE_TRAY2_N","",
+ "PRSNT_COMPUTE_TRAY3_N","",
+ "PRSNT_COMPUTE_TRAY4_N","",
+ /*D0 - D7*/
+ "PRSNT_COMPUTE_TRAY5_N","",
+ "PRSNT_COMPUTE_TRAY6_N","",
+ "PRSNT_COMPUTE_TRAY7_N","",
+ "PRSNT_COMPUTE_TRAY8_N","",
+ "PRSNT_NVS_TRAY1_N","",
+ "PRSNT_NVS_TRAY2_N","",
+ "PRSNT_COMPUTE_TRAY11_N","",
+ "PRSNT_COMPUTE_TRAY12_N","",
+ /*E0 - E7*/
+ "PRSNT_COMPUTE_TRAY13_N","",
+ "PRSNT_COMPUTE_TRAY14_N","",
+ "PRSNT_COMPUTE_TRAY15_N","",
+ "PRSNT_COMPUTE_TRAY16_N","",
+ "PRSNT_COMPUTE_TRAY17_N","",
+ "PRSNT_COMPUTE_TRAY18_N","",
+ "PRSNT_NVS_TRAY3_N","",
+ "PRSNT_NVS_TRAY4_N","",
+ /*F0 - F7*/
+ "PRSNT_NVS_TRAY5_N","",
+ "PRSNT_NVS_TRAY6_N","",
+ "PRSNT_NVS_TRAY7_N","",
+ "PRSNT_NVS_TRAY8_N","",
+ "PRSNT_NVS_TRAY9_N","",
+ "PRSNT_COMPUTE_TRAY9_N","",
+ "PRSNT_COMPUTE_TRAY10_N","",
+ "SMALL_LEAK_COMPUTE_TRAY1_N","",
+ /*G0 - G7*/
+ "SMALL_LEAK_COMPUTE_TRAY2_N","",
+ "SMALL_LEAK_COMPUTE_TRAY3_N","",
+ "SMALL_LEAK_COMPUTE_TRAY4_N","",
+ "SMALL_LEAK_COMPUTE_TRAY5_N","",
+ "SMALL_LEAK_COMPUTE_TRAY6_N","",
+ "SMALL_LEAK_COMPUTE_TRAY7_N","",
+ "SMALL_LEAK_COMPUTE_TRAY8_N","",
+ "SMALL_LEAK_NVS_TRAY1_N","",
+ /*H0 - H7*/
+ "SMALL_LEAK_NVS_TRAY2_N","",
+ "SMALL_LEAK_COMPUTE_TRAY11_N","",
+ "SMALL_LEAK_COMPUTE_TRAY12_N","",
+ "SMALL_LEAK_COMPUTE_TRAY13_N","",
+ "SMALL_LEAK_COMPUTE_TRAY14_N","",
+ "SMALL_LEAK_COMPUTE_TRAY15_N","",
+ "SMALL_LEAK_COMPUTE_TRAY16_N","",
+ "SMALL_LEAK_COMPUTE_TRAY17_N","",
+ /*I0 - I7*/
+ "SMALL_LEAK_COMPUTE_TRAY18_N","",
+ "SMALL_LEAK_NVS_TRAY3_N","",
+ "SMALL_LEAK_NVS_TRAY4_N","",
+ "SMALL_LEAK_NVS_TRAY5_N","",
+ "SMALL_LEAK_NVS_TRAY6_N","",
+ "SMALL_LEAK_NVS_TRAY7_N","",
+ "SMALL_LEAK_NVS_TRAY8_N","",
+ "SMALL_LEAK_NVS_TRAY9_N","",
+ /*J0 - J7*/
+ "SMALL_LEAK_COMPUTE_TRAY9_N","",
+ "SMALL_LEAK_COMPUTE_TRAY10_N","",
+ "PWRGD_COMPUTE_TRAY1_N","",
+ "PWRGD_COMPUTE_TRAY2_N","",
+ "PWRGD_COMPUTE_TRAY3_N","",
+ "PWRGD_COMPUTE_TRAY4_N","",
+ "PWRGD_COMPUTE_TRAY5_N","",
+ "PWRGD_COMPUTE_TRAY6_N","",
+ /*K0 - K7*/
+ "PWRGD_COMPUTE_TRAY7_N","",
+ "PWRGD_COMPUTE_TRAY8_N","",
+ "PWRGD_NVS_TRAY1_PWROK_N","",
+ "PWRGD_NVS_TRAY2_PWROK_N","",
+ "PWRGD_COMPUTE_TRAY11_N","",
+ "PWRGD_COMPUTE_TRAY12_N","",
+ "PWRGD_COMPUTE_TRAY13_N","",
+ "PWRGD_COMPUTE_TRAY14_N","",
+ /*L0 - L7*/
+ "PWRGD_COMPUTE_TRAY15_N","",
+ "PWRGD_COMPUTE_TRAY16_N","",
+ "PWRGD_COMPUTE_TRAY17_N","",
+ "PWRGD_COMPUTE_TRAY18_N","",
+ "PWRGD_NVS_TRAY3_PWROK_N","",
+ "PWRGD_NVS_TRAY4_PWROK_N","",
+ "PWRGD_NVS_TRAY5_PWROK_N","",
+ "PWRGD_NVS_TRAY6_PWROK_N","",
+ /*M0 - M7*/
+ "PWRGD_NVS_TRAY7_PWROK_N","",
+ "PWRGD_NVS_TRAY8_PWROK_N","",
+ "PWRGD_NVS_TRAY9_PWROK_N","",
+ "PWRGD_COMPUTE_TRAY9_N","",
+ "PWRGD_COMPUTE_TRAY10_N","",
+ "LEAK_DETECT_COMPUTE_TRAY1_N","",
+ "LEAK_DETECT_COMPUTE_TRAY2_N","",
+ "LEAK_DETECT_COMPUTE_TRAY3_N","",
+ /*N0 - N7*/
+ "LEAK_DETECT_COMPUTE_TRAY4_N","",
+ "LEAK_DETECT_COMPUTE_TRAY5_N","",
+ "LEAK_DETECT_COMPUTE_TRAY6_N","",
+ "LEAK_DETECT_COMPUTE_TRAY7_N","",
+ "LEAK_DETECT_COMPUTE_TRAY8_N","",
+ "LEAK_DETECT_NVS_TRAY1_N","",
+ "LEAK_DETECT_NVS_TRAY2_N","",
+ "LEAK_DETECT_COMPUTE_TRAY11_N","",
+ /*O0 - O7*/
+ "LEAK_DETECT_COMPUTE_TRAY12_N","",
+ "LEAK_DETECT_COMPUTE_TRAY13_N","",
+ "LEAK_DETECT_COMPUTE_TRAY14_N","",
+ "LEAK_DETECT_COMPUTE_TRAY15_N","",
+ "LEAK_DETECT_COMPUTE_TRAY16_N","",
+ "LEAK_DETECT_COMPUTE_TRAY17_N","",
+ "LEAK_DETECT_COMPUTE_TRAY18_N","",
+ "LEAK_DETECT_NVS_TRAY3_N","",
+ /*P0 - P7*/
+ "LEAK_DETECT_NVS_TRAY4_N","",
+ "LEAK_DETECT_NVS_TRAY5_N","",
+ "LEAK_DETECT_NVS_TRAY6_N","",
+ "LEAK_DETECT_NVS_TRAY7_N","",
+ "LEAK_DETECT_NVS_TRAY8_N","",
+ "LEAK_DETECT_NVS_TRAY9_N","",
+ "LEAK_DETECT_COMPUTE_TRAY9_N","",
+ "LEAK_DETECT_COMPUTE_TRAY10_N","";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v8 0/2] Add Meta(Facebook) Ventura BMC(AST2600)
2025-06-11 11:26 [PATCH v8 0/2] Add Meta(Facebook) Ventura BMC(AST2600) Jason Hsu
2025-06-11 11:26 ` [PATCH v8 1/2] dt-bindings: arm: aspeed: add Meta Ventura board Jason Hsu
2025-06-11 11:26 ` [PATCH v8 2/2] ARM: dts: aspeed: ventura: add Meta Ventura BMC Jason Hsu
@ 2025-06-11 13:11 ` Rob Herring (Arm)
2 siblings, 0 replies; 5+ messages in thread
From: Rob Herring (Arm) @ 2025-06-11 13:11 UTC (permalink / raw)
To: Jason Hsu
Cc: jerry.lin, yang.chen, conor+dt, patrick, joel, linux-kernel,
andrew, linux-arm-kernel, krzk+dt, devicetree, linux-aspeed
On Wed, 11 Jun 2025 19:26:48 +0800, Jason Hsu wrote:
> Add Linux device tree entry related to Meta(Facebook) Ventura specific
> devices connected to BMC(AST2600) SoC.
>
> ---
> v1:
> 1. Create ventura dts file.
> 2. Add commit msg.
> 3. Use format-patch to generate patch.
> 4. Add subject prefixes matching the subsystem.
> ---
> v2:
> 1. Modify email content.
> ---
> v3:
> 1. Add mail list.
> ---
> v4:
> 1. Apply git send-email --thread option.
> 2. Sort nodes in the dts alphanumerically.
> ---
> v5:
> 1. Run scripts/checkpatch.pl and fix reported warnings.
> 2. Remove unnecessary 88E6393X CONFIG FRU.
> ---
> v6:
> 1. Add a new stage for the DTS change.
> 2. Run scripts/checkpatch.pl and fix reported error.
> 3. Fix the issue in a separate patch.
> ---
> v7:
> 1. Fix broken indentation in the device tree file.
> 2. Sort nodes alphabetically, then by address if equal.
> 3. Rename fan sensor nodes from 'hwmon' to 'fan-controller'.
> ---
> v8:
> 1. This patch series has significant changes compared to
> previous versions, and quite some time has passed since the last
> submission.Therefore, previously received Acked-by/Reviewed-by/Tested-by
> tags are not included in this version.
> If needed, tags can be added again after review of thisnew version.
> ---
> Signed-off-by: Jason Hsu <jasonhell19@gmail.com>
>
> Jason Hsu (2):
> dt-bindings: arm: aspeed: add Meta Ventura board
> ARM: dts: aspeed: ventura: add Meta Ventura BMC
>
> .../bindings/arm/aspeed/aspeed.yaml | 1 +
> arch/arm/boot/dts/aspeed/Makefile | 1 +
> .../aspeed/aspeed-bmc-facebook-ventura.dts | 1481 +++++++++++++++++
> 3 files changed, 1483 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
>
> --
> 2.34.1
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: failed to guess base
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250611112650.595554-1-jasonhell19@gmail.com:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb@1e6e0000/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb@1e780000/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop@80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@24 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@2c (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: kcs@114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb@1e780000/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb@1e780000/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: i2c@400 (aspeed,ast2600-i2c-bus): Unevaluated properties are not allowed ('aspeed,hw-timeout-ms' was unexpected)
from schema $id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb@1e790000/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: fsi@1e79b100 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb@1e790000/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: /ahb/apb@1e790000/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v8 2/2] ARM: dts: aspeed: ventura: add Meta Ventura BMC
2025-06-11 11:26 ` [PATCH v8 2/2] ARM: dts: aspeed: ventura: add Meta Ventura BMC Jason Hsu
@ 2025-06-13 0:52 ` Andrew Jeffery
0 siblings, 0 replies; 5+ messages in thread
From: Andrew Jeffery @ 2025-06-13 0:52 UTC (permalink / raw)
To: Jason Hsu, robh, krzk+dt, conor+dt, joel, patrick, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel
Cc: yang.chen, jerry.lin
Hi Jason,
On Wed, 2025-06-11 at 19:26 +0800, Jason Hsu wrote:
> Add Linux device tree related to Meta(Facebook) Ventura specific
We're writing prose, not a C function invocation. Can you please add a
space after 'Meta':
Meta (Facebook)
> devices connected to BMC(AST2600) SoC.
Can you provide a bit of a description of the platform design? This
will help review the devicetree content.
>
> Signed-off-by: Jason Hsu <jasonhell19@gmail.com>
> ---
> arch/arm/boot/dts/aspeed/Makefile | 1 +
> .../aspeed/aspeed-bmc-facebook-ventura.dts | 1481 +++++++++++++++++
> 2 files changed, 1482 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
>
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index 2e5f4833a073..e07666d902fb 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-facebook-minerva.dtb \
> aspeed-bmc-facebook-minipack.dtb \
> aspeed-bmc-facebook-tiogapass.dtb \
> + aspeed-bmc-facebook-ventura.dtb \
> aspeed-bmc-facebook-wedge40.dtb \
> aspeed-bmc-facebook-wedge100.dtb \
> aspeed-bmc-facebook-wedge400.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
> new file mode 100644
> index 000000000000..34a3ef3a0efe
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dts
> @@ -0,0 +1,1481 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2023 Facebook Inc.
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/i2c/i2c.h>
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +
...
> +&i2c5 {
> + status = "okay";
> +
> + // RMC FRU
> + eeprom@54 {
> + compatible = "atmel,24c128";
> + reg = <0x54>;
> + };
> + // VR TEMP U399
> + temperature-sensor@4c {
> + compatible = "ti,tmp75";
> + reg = <0x4c>;
> + };
Can you please make sure the node ordering adheres to the documentation
here:
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-nodes
Please check the rest of the devicetree.
> + // VR TEMP U397
> + temperature-sensor@4d {
> + compatible = "ti,tmp75";
> + reg = <0x4d>;
> + };
> + // BRICK TEMP U398
> + temperature-sensor@4e {
> + compatible = "ti,tmp75";
> + reg = <0x4e>;
> + };
> +
> + temperature-sensor@4f {
> + compatible = "ti,tmp75";
> + reg = <0x4f>;
> + };
> +};
> +
> +&i2c6 {
> + status = "okay";
> +
> + gpio@20 {
> + compatible = "nxp,pca9555";
> + reg = <0x20>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpio@21 {
> + compatible = "nxp,pca9555";
> + reg = <0x21>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpio@22 {
> + compatible = "nxp,pca9555";
> + reg = <0x22>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + rtc@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +};
> +
> +&i2c7 {
> + status = "okay";
> + bus-frequency = <100000>;
> + multi-master;
> + aspeed,hw-timeout-ms = <1000>;
Did you test this with `make dtbs_check`? I expect not, as it causes a
warning identified by Rob's bot:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-ventura.dtb: i2c@400 (aspeed,ast2600-i2c-bus): Unevaluated properties are not allowed ('aspeed,hw-timeout-ms' was unexpected)
from schema $id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
Can you please fix that?
Andrew
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2025-06-13 0:52 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-06-11 11:26 [PATCH v8 0/2] Add Meta(Facebook) Ventura BMC(AST2600) Jason Hsu
2025-06-11 11:26 ` [PATCH v8 1/2] dt-bindings: arm: aspeed: add Meta Ventura board Jason Hsu
2025-06-11 11:26 ` [PATCH v8 2/2] ARM: dts: aspeed: ventura: add Meta Ventura BMC Jason Hsu
2025-06-13 0:52 ` Andrew Jeffery
2025-06-11 13:11 ` [PATCH v8 0/2] Add Meta(Facebook) Ventura BMC(AST2600) Rob Herring (Arm)
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).