From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dhananjay Phadke Date: Wed, 13 Jul 2022 00:48:04 -0700 Subject: [PATCH v7 3/5] ARM: dts: aspeed: Add HACE device controller node In-Reply-To: <20220705020936.1751771-4-neal_liu@aspeedtech.com> References: <20220705020936.1751771-1-neal_liu@aspeedtech.com> <20220705020936.1751771-4-neal_liu@aspeedtech.com> Message-ID: List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit On 7/4/2022 7:09 PM, Neal Liu wrote: > Add hace node to device tree for AST2500/AST2600. > > Signed-off-by: Neal Liu > Signed-off-by: Johnny Huang > --- > arch/arm/boot/dts/aspeed-g5.dtsi | 8 ++++++++ > arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++ > 2 files changed, 16 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi > index c89092c3905b..04f98d1dbb97 100644 > --- a/arch/arm/boot/dts/aspeed-g5.dtsi > +++ b/arch/arm/boot/dts/aspeed-g5.dtsi > @@ -262,6 +262,14 @@ rng: hwrng at 1e6e2078 { > quality = <100>; > }; > > + hace: crypto at 1e6e3000 { > + compatible = "aspeed,ast2500-hace"; > + reg = <0x1e6e3000 0x100>; > + interrupts = <4>; > + clocks = <&syscon ASPEED_CLK_GATE_YCLK>; > + resets = <&syscon ASPEED_RESET_HACE>; > + }; > + > gfx: display at 1e6e6000 { > compatible = "aspeed,ast2500-gfx", "syscon"; > reg = <0x1e6e6000 0x1000>; > diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi > index 6660564855ff..095cf8d03616 100644 > --- a/arch/arm/boot/dts/aspeed-g6.dtsi > +++ b/arch/arm/boot/dts/aspeed-g6.dtsi > @@ -323,6 +323,14 @@ apb { > #size-cells = <1>; > ranges; > > + hace: crypto at 1e6d0000 { > + compatible = "aspeed,ast2600-hace"; > + reg = <0x1e6d0000 0x200>; > + interrupts = ; > + clocks = <&syscon ASPEED_CLK_GATE_YCLK>; > + resets = <&syscon ASPEED_RESET_HACE>; > + }; > + Thank you for addressing ast2500, for this patch - Reviewed-by: Dhananjay Phadke