From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chanh Nguyen Date: Mon, 14 Oct 2024 17:54:57 +0700 Subject: [PATCH] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC In-Reply-To: <20241014105031.1963079-1-chanh@os.amperecomputing.com> References: <20241014105031.1963079-1-chanh@os.amperecomputing.com> Message-ID: List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi @Andrew, I just upstreamed the patch https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/Documentation/devicetree/bindings/trivial-devices.yaml?id=3d973b98d2744cfced1f06167c83e2cc2d7b63d5 ?to linux-next branch,? I think we also need to pick it up to https://github.com/openbmc/linux/tree/dev-6.6, which will help pass the "onnn,adt7462" compatible warning log from the dt_binding_check tool. On 14/10/2024 17:50, Chanh Nguyen wrote: > The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson > hardware reference platform with AmpereOne(TM)M processor. > > Signed-off-by: Chanh Nguyen > --- > arch/arm/boot/dts/aspeed/Makefile | 1 + > .../aspeed/aspeed-bmc-ampere-mtjefferson.dts | 646 ++++++++++++++++++ > 2 files changed, 647 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > > diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile > index c4f064e4b073..b1fb0853a789 100644 > --- a/arch/arm/boot/dts/aspeed/Makefile > +++ b/arch/arm/boot/dts/aspeed/Makefile > @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-bmc-amd-daytonax.dtb \ > aspeed-bmc-amd-ethanolx.dtb \ > aspeed-bmc-ampere-mtjade.dtb \ > + aspeed-bmc-ampere-mtjefferson.dtb \ > aspeed-bmc-ampere-mtmitchell.dtb \ > aspeed-bmc-arm-stardragon4800-rep2.dtb \ > aspeed-bmc-asrock-e3c246d4i.dtb \ > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > new file mode 100644 > index 000000000000..f24111ab9e65 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts > @@ -0,0 +1,646 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +// Copyright 2024 Ampere Computing LLC. > + > +/dts-v1/; > + > +#include "aspeed-g6.dtsi" > +#include > +#include > + > +/ { > + model = "Ampere Mt. Jefferson BMC"; > + compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600"; > + > + aliases { > + i2c20 = &i2c4_bus70_chn0; > + i2c22 = &i2c4_bus70_chn2; > + i2c24 = &i2c2_bus70_chn0; > + > + /* > + * I2C OCP alias port > + */ > + i2c30 = &ocpslot; > + > + /* > + * I2C NVMe alias port > + */ > + i2c48 = &nvmeslot_0; > + i2c49 = &nvmeslot_1; > + i2c50 = &nvmeslot_2; > + i2c51 = &nvmeslot_3; > + i2c52 = &nvmeslot_4; > + i2c53 = &nvmeslot_5; > + i2c54 = &nvmeslot_6; > + i2c55 = &nvmeslot_7; > + i2c56 = &nvmeslot_8; > + i2c57 = &nvmeslot_9; > + i2c58 = &nvmeslot_10; > + i2c59 = &nvmeslot_11; > + }; > + > + chosen { > + stdout-path = &uart5; > + }; > + > + memory at 80000000 { > + device_type = "memory"; > + reg = <0x80000000 0x80000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + gfx_memory: framebuffer { > + size = <0x01000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + video_engine_memory: video { > + size = <0x04000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + vga_memory: region at bf000000 { > + no-map; > + compatible = "shared-dma-pool"; > + reg = <0xbf000000 0x01000000>; /* 16M */ > + }; > + }; > + > + voltage_mon_reg: voltage-mon-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "ltc2497_reg"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + leds { > + compatible = "gpio-leds"; > + led-bmc-ready { > + gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>; > + }; > + > + led-sw-heartbeat { > + gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>; > + }; > + > + led-identify { > + gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>; > + }; > + > + led-fault { > + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, > + <&adc_i2c_2 0>, <&adc_i2c_2 1>, > + <&adc_i2c_2 2>, <&adc_i2c_2 3>, > + <&adc_i2c_2 4>, <&adc_i2c_2 5>, > + <&adc_i2c_2 6>, <&adc_i2c_2 7>, > + <&adc_i2c_2 8>, <&adc_i2c_2 9>, > + <&adc_i2c_2 10>, <&adc_i2c_2 11>, > + <&adc_i2c_2 12>, <&adc_i2c_2 13>, > + <&adc_i2c_2 14>, <&adc_i2c_2 15>, > + <&adc_i2c_0 0>, <&adc_i2c_0 1>, > + <&adc_i2c_0 2>, <&adc_i2c_0 3>, > + <&adc_i2c_0 4>, <&adc_i2c_0 5>, > + <&adc_i2c_0 6>, <&adc_i2c_0 7>, > + <&adc_i2c_0 8>, <&adc_i2c_0 9>, > + <&adc_i2c_0 10>, <&adc_i2c_0 11>, > + <&adc_i2c_0 12>; > + }; > +}; > + > +&mdio0 { > + status = "okay"; > + > + ethphy0: ethernet-phy at 0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + }; > +}; > + > +&mac0 { > + status = "okay"; > + > + phy-mode = "rgmii"; > + phy-handle = <ðphy0>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgmii1_default>; > +}; > + > +&mac3 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rmii4_default>; > + clock-names = "MACCLK", "RCLK"; > + use-ncsi; > +}; > + > +&fmc { > + status = "okay"; > + flash at 0 { > + status = "okay"; > + m25p,fast-read; > + label = "bmc"; > + spi-max-frequency = <50000000>; > +#include "openbmc-flash-layout-64.dtsi" > + }; > + > + flash at 1 { > + status = "okay"; > + m25p,fast-read; > + label = "alt-bmc"; > + spi-max-frequency = <50000000>; > +#include "openbmc-flash-layout-64-alt.dtsi" > + }; > +}; > + > +&spi1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi1_default>; > + > + flash at 0 { > + status = "okay"; > + m25p,fast-read; > + label = "pnor"; > + spi-max-frequency = <20000000>; > + }; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&i2c0 { > + status = "okay"; > +}; > + > +&i2c1 { > + status = "okay"; > +}; > + > +&i2c2 { > + status = "okay"; > + i2c-mux at 70 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x70>; > + i2c-mux-idle-disconnect; > + > + i2c2_bus70_chn0: i2c at 0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + psu at 58 { > + compatible = "pmbus"; > + reg = <0x58>; > + }; > + > + psu at 59 { > + compatible = "pmbus"; > + reg = <0x59>; > + }; > + }; > + }; > +}; > + > +&i2c3 { > + status = "okay"; > + bus-frequency = <1000000>; > + multi-master; > + mctp-controller; > + > + mctp at 10 { > + compatible = "mctp-i2c-controller"; > + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; > + }; > +}; > + > +&i2c4 { > + status = "okay"; > + eeprom at 50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + i2c-mux at 70 { > + compatible = "nxp,pca9545"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x70>; > + i2c-mux-idle-disconnect; > + > + i2c4_bus70_chn0: i2c at 0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + > + eeprom at 52 { > + compatible = "atmel,24c256"; > + reg = <0x52>; > + pagesize = <32>; > + }; > + temperature-sensor at 48 { > + compatible = "ti,tmp75"; > + reg = <0x48>; > + }; > + temperature-sensor at 49 { > + compatible = "ti,tmp75"; > + reg = <0x49>; > + }; > + temperature-sensor at 4a{ > + compatible = "ti,tmp75"; > + reg = <0x4a>; > + }; > + temperature-sensor at 4b { > + compatible = "ti,tmp464"; > + reg = <0x4b>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + channel at 0 { > + reg = <0x0>; > + status = "disabled"; > + }; > + channel at 1 { > + reg = <0x1>; > + status = "disabled"; > + }; > + channel at 2 { > + reg = <0x2>; > + status = "disabled"; > + }; > + channel at 3 { > + reg = <0x3>; > + status = "disabled"; > + }; > + channel at 4 { > + reg = <0x4>; > + }; > + }; > + temperature-sensor at 4d { > + compatible = "ti,tmp75"; > + reg = <0x4d>; > + }; > + temperature-sensor at 4e { > + compatible = "ti,tmp75"; > + reg = <0x4e>; > + }; > + temperature-sensor at 4f { > + compatible = "ti,tmp75"; > + reg = <0x4f>; > + }; > + temperature-sensor at 28 { > + compatible = "nuvoton,nct7802"; > + reg = <0x28>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + channel at 1 { /* RTD1 */ > + reg = <1>; > + sensor-type = "temperature"; > + temperature-mode = "thermistor"; > + }; > + }; > + adc_i2c_0: adc at 14 { > + compatible = "lltc,ltc2497"; > + reg = <0x14>; > + vref-supply = <&voltage_mon_reg>; > + #io-channel-cells = <1>; > + }; > + }; > + > + i2c4_bus70_chn2: i2c at 2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x2>; > + > + adc_i2c_2: adc at 14 { > + compatible = "lltc,ltc2497"; > + reg = <0x14>; > + vref-supply = <&voltage_mon_reg>; > + #io-channel-cells = <1>; > + }; > + }; > + }; > +}; > + > +&i2c5 { > + status = "okay"; > + i2c-mux at 70 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x70>; > + i2c-mux-idle-disconnect; > + > + i2c at 0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + > + i2c-mux at 71 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x71>; > + i2c-mux-idle-disconnect; > + > + nvmeslot_8: i2c at 0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + }; > + nvmeslot_9: i2c at 1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x1>; > + }; > + nvmeslot_10: i2c at 2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x2>; > + }; > + nvmeslot_11: i2c at 3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x3>; > + }; > + }; > + > + i2c-mux at 72 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x72>; > + i2c-mux-idle-disconnect; > + > + nvmeslot_4: i2c at 4 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x4>; > + }; > + nvmeslot_5: i2c at 5 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x5>; > + }; > + nvmeslot_6: i2c at 6 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x6>; > + }; > + nvmeslot_7: i2c at 7 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x7>; > + }; > + }; > + > + i2c-mux at 74 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x74>; > + i2c-mux-idle-disconnect; > + > + ocpslot: i2c at 0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + > + ocpslot_temp: temperature-sensor at 1f { > + compatible = "ti,tmp421"; > + reg = <0x1f>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + channel at 0 { > + reg = <0x0>; > + status = "disabled"; > + }; > + channel at 1 { > + reg = <0x1>; > + }; > + }; > + }; > + > + nvmeslot_0: i2c at 4 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x4>; > + }; > + nvmeslot_1: i2c at 5 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x5>; > + }; > + nvmeslot_2: i2c at 6 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x6>; > + }; > + nvmeslot_3: i2c at 7 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x7>; > + }; > + }; > + }; > + }; > +}; > + > +&i2c6 { > + status = "okay"; > + > + rtc at 51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + }; > +}; > + > +&i2c7 { > + status = "okay"; > + > + temperature-sensor at 4f { > + compatible = "ti,tmp75"; > + reg = <0x4f>; > + }; > +}; > + > +&i2c8 { > + status = "okay"; > + > + fan-controller at 5c { > + compatible = "onnn,adt7462"; > + reg = <0x5c>; > + }; > +}; > + > +&i2c9 { > + status = "okay"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + eeprom at 50 { > + compatible = "atmel,24c02"; > + reg = <0x50>; > + }; > + > + eeprom at 52 { > + compatible = "atmel,24c02"; > + reg = <0x52>; > + }; > + > + temperature-sensor at 18 { > + compatible = "jedec,jc-42.4-temp"; > + reg = <0x18>; > + }; > + > + temperature-sensor at 1a { > + compatible = "jedec,jc-42.4-temp"; > + reg = <0x1a>; > + }; > +}; > + > +&i2c10 { > + status = "okay"; > +}; > + > +&i2c11 { > + status = "okay"; > + ssif-bmc at 10 { > + compatible = "ssif-bmc"; > + reg = <0x10>; > + }; > +}; > + > +&i2c14 { > + status = "okay"; > + eeprom at 50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + > + bmc_ast2600_cpu: temperature-sensor at 48 { > + compatible = "ti,tmp75"; > + reg = <0x48>; > + }; > +}; > + > +&i2c15 { > + status = "okay"; > + gpio_expander1: gpio-expander at 22 { > + compatible = "nxp,pca9535"; > + reg = <0x22>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-line-names = > + "presence-ocp1","presence-ocp2", > + "","", > + "","", > + "","", > + "","", > + "","", > + "","", > + "",""; > + }; > +}; > + > +&adc0 { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default > + &pinctrl_adc2_default>; > +}; > + > +&vhub { > + status = "okay"; > +}; > + > +&video { > + status = "okay"; > + memory-region = <&video_engine_memory>; > +}; > + > +&gpio0 { > + gpio-line-names = > + /*A0-A7*/ "","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n", > + /*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete", > + "chassis-id-sel", > + /*C0-C7*/ "s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel", > + "spd-sel", > + /*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n", > + "","","","", > + /*E0-E7*/ "eth-phy-rst-n","eth-phy-int-n","","","","","","", > + /*F0-F7*/ "s0-pcp-oc-warn-n","","power-chassis-control", > + "cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","", > + /*G0-G7*/ "","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr", > + "led-fp-sta-amb", > + /*H0-H7*/ "jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","", > + "","", > + /*I0-I7*/ "","","","","","","power-button","rtc-battery-voltage-read-enable", > + /*J0-J7*/ "","","","","","","","", > + /*K0-K7*/ "","","","","","","","", > + /*L0-L7*/ "","","","","reset-button","","","", > + /*M0-M7*/ "nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock", > + "","","", > + /*N0-N7*/ "hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb", > + "jtag-dbgr-prsnt-n","","","", > + /*O0-O7*/ "","","","","","","","", > + /*P0-P7*/ "ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n", > + "led-bmc-hb", > + /*Q0-Q7*/ "","","","","","","","", > + /*R0-R7*/ "","","","","","","","", > + /*S0-S7*/ "","","identify-button","led-identify","","spi-nor-access","host0-ready","", > + /*T0-T7*/ "","","","","","","","", > + /*U0-U7*/ "","","","","","","","", > + /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", > + "host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n", > + "host0-shd-ack-n","s0-overtemp-n", > + /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", > + "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", > + /*X0-X7*/ "","","","","","","","", > + /*Y0-Y7*/ "","","","vrd-prg-en-n","","","","host0-special-boot", > + /*Z0-Z7*/ "","ps0-pgood","ps1-pgood","","","","",""; > + > + ocp-aux-pwren-hog { > + gpio-hog; > + gpios = ; > + output-high; > + line-name = "ocp-aux-pwren"; > + }; > + > +}; > + > +&gpio1 { > + gpio-line-names = > + /*18A0-18A7*/ "","","","","","","","", > + /*18B0-18B7*/ "","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel", > + /*18C0-18C7*/ "uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1", > + "","","","", > + /*18D0-18D7*/ "","","","","","","","", > + /*18E0-18E3*/ "","","",""; > +};