linux-bcache.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Coly Li <colyli@suse.de>
To: linux-bcache@vger.kernel.org
Cc: linux-block@vger.kernel.org, Coly Li <colyli@suse.de>,
	Michael Lyle <mlyle@lyle.org>,
	Junhui Tang <tang.junhui@zte.com.cn>
Subject: [PATCH v5 09/10] bcache: add io_disable to struct cached_dev
Date: Tue,  6 Feb 2018 12:20:59 +0800	[thread overview]
Message-ID: <20180206042100.65021-10-colyli@suse.de> (raw)
In-Reply-To: <20180206042100.65021-1-colyli@suse.de>

If a bcache device is configured to writeback mode, current code does not
handle write I/O errors on backing devices properly.

In writeback mode, write request is written to cache device, and
latter being flushed to backing device. If I/O failed when writing from
cache device to the backing device, bcache code just ignores the error and
upper layer code is NOT noticed that the backing device is broken.

This patch tries to handle backing device failure like how the cache device
failure is handled,
- Add a error counter 'io_errors' and error limit 'error_limit' in struct
  cached_dev. Add another io_disable to struct cached_dev to disable I/Os
  on the problematic backing device.
- When I/O error happens on backing device, increase io_errors counter. And
  if io_errors reaches error_limit, set cache_dev->io_disable to true, and
  stop the bcache device.

The result is, if backing device is broken of disconnected, and I/O errors
reach its error limit, backing device will be disabled and the associated
bcache device will be removed from system.

Changelog:
v2: remove "bcache: " prefix in pr_error(), and use correct name string to
    print out bcache device gendisk name.
v1: indeed this is new added in v2 patch set.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
---
 drivers/md/bcache/bcache.h  |  6 ++++++
 drivers/md/bcache/io.c      | 14 ++++++++++++++
 drivers/md/bcache/request.c | 14 ++++++++++++--
 drivers/md/bcache/super.c   | 23 ++++++++++++++++++++++-
 drivers/md/bcache/sysfs.c   | 15 ++++++++++++++-
 5 files changed, 68 insertions(+), 4 deletions(-)

diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h
index 263164490833..c59ce168bd82 100644
--- a/drivers/md/bcache/bcache.h
+++ b/drivers/md/bcache/bcache.h
@@ -366,6 +366,7 @@ struct cached_dev {
 	unsigned		sequential_cutoff;
 	unsigned		readahead;
 
+	unsigned		io_disable:1;
 	unsigned		verify:1;
 	unsigned		bypass_torture_test:1;
 
@@ -387,6 +388,9 @@ struct cached_dev {
 	unsigned		writeback_rate_minimum;
 
 	enum stop_on_faliure	stop_when_cache_set_failed;
+#define DEFAULT_CACHED_DEV_ERROR_LIMIT	64
+	atomic_t		io_errors;
+	unsigned		error_limit;
 };
 
 enum alloc_reserve {
@@ -896,6 +900,7 @@ static inline void closure_bio_submit(struct cache_set *c,
 
 /* Forward declarations */
 
+void bch_count_backing_io_errors(struct cached_dev *dc, struct bio *bio);
 void bch_count_io_errors(struct cache *, blk_status_t, int, const char *);
 void bch_bbio_count_io_errors(struct cache_set *, struct bio *,
 			      blk_status_t, const char *);
@@ -923,6 +928,7 @@ int bch_bucket_alloc_set(struct cache_set *, unsigned,
 			 struct bkey *, int, bool);
 bool bch_alloc_sectors(struct cache_set *, struct bkey *, unsigned,
 		       unsigned, unsigned, bool);
+bool bch_cached_dev_error(struct cached_dev *dc);
 
 __printf(2, 3)
 bool bch_cache_set_error(struct cache_set *, const char *, ...);
diff --git a/drivers/md/bcache/io.c b/drivers/md/bcache/io.c
index 8013ecbcdbda..7fac97ae036e 100644
--- a/drivers/md/bcache/io.c
+++ b/drivers/md/bcache/io.c
@@ -50,6 +50,20 @@ void bch_submit_bbio(struct bio *bio, struct cache_set *c,
 }
 
 /* IO errors */
+void bch_count_backing_io_errors(struct cached_dev *dc, struct bio *bio)
+{
+	char buf[BDEVNAME_SIZE];
+	unsigned errors;
+
+	WARN_ONCE(!dc, "NULL pointer of struct cached_dev");
+
+	errors = atomic_add_return(1, &dc->io_errors);
+	if (errors < dc->error_limit)
+		pr_err("%s: IO error on backing device, unrecoverable",
+			bio_devname(bio, buf));
+	else
+		bch_cached_dev_error(dc);
+}
 
 void bch_count_io_errors(struct cache *ca,
 			 blk_status_t error,
diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c
index 9c6dda3b0068..03245e6980a6 100644
--- a/drivers/md/bcache/request.c
+++ b/drivers/md/bcache/request.c
@@ -637,6 +637,8 @@ static void backing_request_endio(struct bio *bio)
 
 	if (bio->bi_status) {
 		struct search *s = container_of(cl, struct search, cl);
+		struct cached_dev *dc = container_of(s->d,
+						     struct cached_dev, disk);
 		/*
 		 * If a bio has REQ_PREFLUSH for writeback mode, it is
 		 * speically assembled in cached_dev_write() for a non-zero
@@ -657,6 +659,7 @@ static void backing_request_endio(struct bio *bio)
 		}
 		s->recoverable = false;
 		/* should count I/O error for backing device here */
+		bch_count_backing_io_errors(dc, bio);
 	}
 
 	bio_put(bio);
@@ -1065,8 +1068,14 @@ static void detatched_dev_end_io(struct bio *bio)
 			    bio_data_dir(bio),
 			    &ddip->d->disk->part0, ddip->start_time);
 
-	kfree(ddip);
+	if (bio->bi_status) {
+		struct cached_dev *dc = container_of(ddip->d,
+						     struct cached_dev, disk);
+		/* should count I/O error for backing device here */
+		bch_count_backing_io_errors(dc, bio);
+	}
 
+	kfree(ddip);
 	bio->bi_end_io(bio);
 }
 
@@ -1105,7 +1114,8 @@ static blk_qc_t cached_dev_make_request(struct request_queue *q,
 	struct cached_dev *dc = container_of(d, struct cached_dev, disk);
 	int rw = bio_data_dir(bio);
 
-	if (unlikely(d->c && test_bit(CACHE_SET_IO_DISABLE, &d->c->flags))) {
+	if (unlikely((d->c && test_bit(CACHE_SET_IO_DISABLE, &d->c->flags)) ||
+		     dc->io_disable)) {
 		bio->bi_status = BLK_STS_IOERR;
 		bio_endio(bio);
 		return BLK_QC_T_NONE;
diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 4f1a14b99415..40b07d980a20 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1196,7 +1196,10 @@ static int cached_dev_init(struct cached_dev *dc, unsigned block_size)
 		max(dc->disk.disk->queue->backing_dev_info->ra_pages,
 		    q->backing_dev_info->ra_pages);
 
-	/* default to auto */
+	atomic_set(&dc->io_errors, 0);
+	dc->io_disable = false;
+	dc->error_limit = DEFAULT_CACHED_DEV_ERROR_LIMIT;
+	/* default to "auto" */
 	dc->stop_when_cache_set_failed = BCH_CACHED_DEV_STOP_ATUO;
 
 	bch_cached_dev_request_init(dc);
@@ -1350,6 +1353,24 @@ int bch_flash_dev_create(struct cache_set *c, uint64_t size)
 	return flash_dev_run(c, u);
 }
 
+bool bch_cached_dev_error(struct cached_dev *dc)
+{
+	char name[BDEVNAME_SIZE];
+
+	if (!dc || test_bit(BCACHE_DEV_CLOSING, &dc->disk.flags))
+		return false;
+
+	dc->io_disable = true;
+	/* make others know io_disable is true earlier */
+	smp_mb();
+
+	pr_err("stop %s: too many IO errors on backing device %s\n",
+		dc->disk.disk->disk_name, bdevname(dc->bdev, name));
+
+	bcache_device_stop(&dc->disk);
+	return true;
+}
+
 /* Cache set */
 
 __printf(2, 3)
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 91d859a54575..e88fdcc549cd 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -141,7 +141,9 @@ SHOW(__bch_cached_dev)
 	var_print(writeback_delay);
 	var_print(writeback_percent);
 	sysfs_hprint(writeback_rate,	dc->writeback_rate.rate << 9);
-
+	sysfs_hprint(io_errors,		atomic_read(&dc->io_errors));
+	sysfs_printf(io_error_limit,	"%i", dc->error_limit);
+	sysfs_printf(io_disable,	"%i", dc->io_disable);
 	var_print(writeback_rate_update_seconds);
 	var_print(writeback_rate_i_term_inverse);
 	var_print(writeback_rate_p_term_inverse);
@@ -232,6 +234,14 @@ STORE(__cached_dev)
 	d_strtoul(writeback_rate_i_term_inverse);
 	d_strtoul_nonzero(writeback_rate_p_term_inverse);
 
+	sysfs_strtoul_clamp(io_error_limit, dc->error_limit, 0, INT_MAX);
+
+	if (attr == &sysfs_io_disable) {
+		int v = strtoul_or_return(buf);
+
+		dc->io_disable = v ? 1 : 0;
+	}
+
 	d_strtoi_h(sequential_cutoff);
 	d_strtoi_h(readahead);
 
@@ -349,6 +359,9 @@ static struct attribute *bch_cached_dev_files[] = {
 	&sysfs_writeback_rate_i_term_inverse,
 	&sysfs_writeback_rate_p_term_inverse,
 	&sysfs_writeback_rate_debug,
+	&sysfs_errors,
+	&sysfs_io_error_limit,
+	&sysfs_io_disable,
 	&sysfs_dirty_data,
 	&sysfs_stripe_size,
 	&sysfs_partial_stripes_expensive,
-- 
2.16.1

  parent reply	other threads:[~2018-02-06  4:20 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-06  4:20 [PATCH v5 00/10] bcache: device failure handling improvement Coly Li
2018-02-06  4:20 ` [PATCH v5 01/10] bcache: set writeback_rate_update_seconds in range [1, 60] seconds Coly Li
2018-02-07 17:31   ` Michael Lyle
2018-02-06  4:20 ` [PATCH v5 02/10] bcache: fix cached_dev->count usage for bch_cache_set_error() Coly Li
2018-02-06  4:20 ` [PATCH v5 03/10] bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set Coly Li
2018-02-07 17:35   ` Michael Lyle
2018-02-06  4:20 ` [PATCH v5 04/10] bcache: stop dc->writeback_rate_update properly Coly Li
2018-02-06  4:20 ` [PATCH v5 05/10] bcache: add CACHE_SET_IO_DISABLE to struct cache_set flags Coly Li
2018-02-06  4:20 ` [PATCH v5 06/10] bcache: add stop_when_cache_set_failed option to backing device Coly Li
2018-02-06 10:50   ` Nix
2018-02-06 11:24     ` Coly Li
2018-02-07 17:36   ` Michael Lyle
2018-02-06  4:20 ` [PATCH v5 07/10] bcache: fix inaccurate io state for detached bcache devices Coly Li
2018-02-07 17:39   ` Michael Lyle
2018-02-06  4:20 ` [PATCH v5 08/10] bcache: add backing_request_endio() for bi_end_io of attached backing device I/O Coly Li
2018-02-06  4:20 ` Coly Li [this message]
2018-02-06  4:21 ` [PATCH v5 10/10] bcache: stop bcache device when backing device is offline Coly Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180206042100.65021-10-colyli@suse.de \
    --to=colyli@suse.de \
    --cc=linux-bcache@vger.kernel.org \
    --cc=linux-block@vger.kernel.org \
    --cc=mlyle@lyle.org \
    --cc=tang.junhui@zte.com.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).