Re: [PATCH v3 0/5] Avoid that scsi-mq queue processing stalls

[Bart Van Assche <Bart.VanAssche@sandisk.com>]

On Fri, 2017-04-07 at 23:34 +0800, Ming Lei wrote:
> On Fri, Apr 07, 2017 at 03:18:19PM +0000, Bart Van Assche wrote:
> > On Fri, 2017-04-07 at 17:41 +0800, Ming Lei wrote:
> > > On Thu, Apr 06, 2017 at 11:10:45AM -0700, Bart Van Assche wrote:
> > > > Hello Jens,
> > > >=20
> > > > The five patches in this patch series fix the queue lockup I report=
ed
> > > > recently on the linux-block mailing list. Please consider these pat=
ches
> > > > for inclusion in the upstream kernel.
> > >=20
> > > I read the commit log of the 5 patches, looks not found descriptions
> > > about root cause of the queue lockup, so could you explain a bit abou=
t
> > > the reason behind?
> >=20
> > Hello Ming,
> >=20
> > If a .queue_rq() function returns BLK_MQ_RQ_QUEUE_BUSY then the block
> > driver that implements that function is responsible for rerunning the
> > hardware queue once requests can be queued successfully again. That is
> > not the case today for the SCSI core. Patch 5/5 ensures that hardware
>=20
> The current .queue_rq() will call blk_mq_delay_queue() if QUEUE_BUSY is
> returned, and once request is completed, the queue will be restarted
> by blk_mq_start_stopped_hw_queues() in scsi_end_request(). This way
> sounds OK in theory. And I just try to understand the specific reason
> which causes the lockup, but still not get it.

Hello Ming,

blk_mq_delay_queue() stops and restarts a hardware queue after a delay has
expired. If the SCSI core calls blk_mq_start_stopped_hw_queues() after that
delay has expired no queues will be restarted. This is why patch 5/5 change=
s
two blk_mq_start_stopped_hw_queues() calls into two blk_mq_run_hw_queues()
calls.

Bart.=