From: Hannes Reinecke <hare@suse.de>
To: Jens Axboe <axboe@kernel.dk>
Cc: Omar Sandoval <osandov@fb.com>, Ming Lei <ming.lei@redhat.com>,
linux-block@vger.kernel.org, Hannes Reinecke <hare@suse.de>,
Hannes Reinecke <hare@suse.com>
Subject: [PATCHv8 2/2] loop: support 4k physical blocksize
Date: Thu, 8 Jun 2017 13:46:45 +0200 [thread overview]
Message-ID: <1496922405-38302-3-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1496922405-38302-1-git-send-email-hare@suse.de>
When generating bootable VM images certain systems (most notably
s390x) require devices with 4k blocksize. This patch implements
a new flag 'LO_FLAGS_BLOCKSIZE' which will set the physical
blocksize to that of the underlying device, and allow to change
the logical blocksize for up to the physical blocksize.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
drivers/block/loop.c | 43 +++++++++++++++++++++++++++++++++++++------
drivers/block/loop.h | 1 +
include/uapi/linux/loop.h | 3 +++
3 files changed, 41 insertions(+), 6 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index fc706ad..4d376c1 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -221,7 +221,8 @@ static void __loop_update_dio(struct loop_device *lo, bool dio)
}
static int
-figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit)
+figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit,
+ loff_t logical_blocksize)
{
loff_t size = get_size(offset, sizelimit, lo->lo_backing_file);
sector_t x = (sector_t)size;
@@ -233,6 +234,12 @@ static void __loop_update_dio(struct loop_device *lo, bool dio)
lo->lo_offset = offset;
if (lo->lo_sizelimit != sizelimit)
lo->lo_sizelimit = sizelimit;
+ if (lo->lo_flags & LO_FLAGS_BLOCKSIZE) {
+ lo->lo_logical_blocksize = logical_blocksize;
+ blk_queue_physical_block_size(lo->lo_queue, lo->lo_blocksize);
+ blk_queue_logical_block_size(lo->lo_queue,
+ lo->lo_logical_blocksize);
+ }
set_capacity(lo->lo_disk, x);
bd_set_size(bdev, (loff_t)get_capacity(bdev->bd_disk) << 9);
/* let user-space know about the new size */
@@ -810,6 +817,7 @@ static void loop_config_discard(struct loop_device *lo)
struct file *file = lo->lo_backing_file;
struct inode *inode = file->f_mapping->host;
struct request_queue *q = lo->lo_queue;
+ int lo_bits = 9;
/*
* We use punch hole to reclaim the free space used by the
@@ -829,8 +837,11 @@ static void loop_config_discard(struct loop_device *lo)
q->limits.discard_granularity = inode->i_sb->s_blocksize;
q->limits.discard_alignment = 0;
- blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
- blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
+ if (lo->lo_flags & LO_FLAGS_BLOCKSIZE)
+ lo_bits = blksize_bits(lo->lo_logical_blocksize);
+
+ blk_queue_max_discard_sectors(q, UINT_MAX >> lo_bits);
+ blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> lo_bits);
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
}
@@ -918,6 +929,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
lo->use_dio = false;
lo->lo_blocksize = lo_blocksize;
+ lo->lo_logical_blocksize = 512;
lo->lo_device = bdev;
lo->lo_flags = lo_flags;
lo->lo_backing_file = file;
@@ -1083,6 +1095,7 @@ static int loop_clr_fd(struct loop_device *lo)
int err;
struct loop_func_table *xfer;
kuid_t uid = current_uid();
+ int lo_flags = lo->lo_flags;
if (lo->lo_encrypt_key_size &&
!uid_eq(lo->lo_key_owner, uid) &&
@@ -1115,9 +1128,26 @@ static int loop_clr_fd(struct loop_device *lo)
if (err)
goto exit;
+ if (info->lo_flags & LO_FLAGS_BLOCKSIZE) {
+ if (!(lo->lo_flags & LO_FLAGS_BLOCKSIZE))
+ lo->lo_logical_blocksize = 512;
+ lo->lo_flags |= LO_FLAGS_BLOCKSIZE;
+ if (LO_INFO_BLOCKSIZE(info) != 512 &&
+ LO_INFO_BLOCKSIZE(info) != 1024 &&
+ LO_INFO_BLOCKSIZE(info) != 2048 &&
+ LO_INFO_BLOCKSIZE(info) != 4096)
+ return -EINVAL;
+ if (LO_INFO_BLOCKSIZE(info) > lo->lo_blocksize)
+ return -EINVAL;
+ }
+
if (lo->lo_offset != info->lo_offset ||
- lo->lo_sizelimit != info->lo_sizelimit)
- if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit)) {
+ lo->lo_sizelimit != info->lo_sizelimit ||
+ lo->lo_flags != lo_flags ||
+ ((lo->lo_flags & LO_FLAGS_BLOCKSIZE) &&
+ lo->lo_logical_blocksize != LO_INFO_BLOCKSIZE(info))) {
+ if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit,
+ LO_INFO_BLOCKSIZE(info)))
err = -EFBIG;
goto exit;
}
@@ -1308,7 +1338,8 @@ static int loop_set_capacity(struct loop_device *lo)
if (unlikely(lo->lo_state != Lo_bound))
return -ENXIO;
- return figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit);
+ return figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit,
+ lo->lo_logical_blocksize);
}
static int loop_set_dio(struct loop_device *lo, unsigned long arg)
diff --git a/drivers/block/loop.h b/drivers/block/loop.h
index fecd3f9..2c096b9 100644
--- a/drivers/block/loop.h
+++ b/drivers/block/loop.h
@@ -49,6 +49,7 @@ struct loop_device {
struct file * lo_backing_file;
struct block_device *lo_device;
unsigned lo_blocksize;
+ unsigned lo_logical_blocksize;
void *key_data;
gfp_t old_gfp_mask;
diff --git a/include/uapi/linux/loop.h b/include/uapi/linux/loop.h
index c8125ec..a3960f9 100644
--- a/include/uapi/linux/loop.h
+++ b/include/uapi/linux/loop.h
@@ -22,6 +22,7 @@ enum {
LO_FLAGS_AUTOCLEAR = 4,
LO_FLAGS_PARTSCAN = 8,
LO_FLAGS_DIRECT_IO = 16,
+ LO_FLAGS_BLOCKSIZE = 32,
};
#include <asm/posix_types.h> /* for __kernel_old_dev_t */
@@ -59,6 +60,8 @@ struct loop_info64 {
__u64 lo_init[2];
};
+#define LO_INFO_BLOCKSIZE(l) (l)->lo_init[0]
+
/*
* Loop filter types
*/
--
1.8.5.6
next prev parent reply other threads:[~2017-06-08 11:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-08 11:46 [PATCHv8 0/2] loop: enable different logical blocksizes Hannes Reinecke
2017-06-08 11:46 ` [PATCHv8 1/2] loop: Remove unused 'bdev' argument from loop_set_capacity Hannes Reinecke
2017-06-08 11:46 ` Hannes Reinecke [this message]
2017-06-09 15:30 ` [PATCHv8 2/2] loop: support 4k physical blocksize Bart Van Assche
2017-06-09 15:33 ` Jens Axboe
2017-06-08 14:40 ` [PATCHv8 0/2] loop: enable different logical blocksizes Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496922405-38302-3-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=axboe@kernel.dk \
--cc=hare@suse.com \
--cc=linux-block@vger.kernel.org \
--cc=ming.lei@redhat.com \
--cc=osandov@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).