From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc <linux-mmc@vger.kernel.org>,
linux-block <linux-block@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
Bough Chen <haibo.chen@nxp.com>,
Alex Lemberg <alex.lemberg@sandisk.com>,
Mateusz Nowak <mateusz.nowak@intel.com>,
Yuliy Izrailov <Yuliy.Izrailov@sandisk.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Dong Aisheng <dongas86@gmail.com>,
Das Asutosh <asutoshd@codeaurora.org>,
Zhangfei Gao <zhangfei.gao@gmail.com>,
Sahitya Tummala <stummala@codeaurora.org>,
Harjani Ritesh <riteshh@codeaurora.org>,
Venu Byravarasu <vbyravarasu@nvidia.com>,
Linus Walleij <linus.walleij@linaro.org>,
Shawn Lin <shawn.lin@rock-chips.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Christoph Hellwig <hch@lst.de>
Subject: [PATCH V14 14/24] mmc: block: Add CQE support
Date: Tue, 21 Nov 2017 15:42:40 +0200 [thread overview]
Message-ID: <1511271770-3444-15-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1511271770-3444-1-git-send-email-adrian.hunter@intel.com>
Add CQE support to the block driver, including:
- optionally using DCMD for flush requests
- "manually" issuing discard requests
- issuing read / write requests to the CQE
- supporting block-layer timeouts
- handling recovery
- supporting re-tuning
CQE offers 25% - 50% better random multi-threaded I/O. There is a slight
(e.g. 2%) drop in sequential read speed but no observable change to sequential
write.
CQE automatically sends the commands to complete requests. However it only
supports reads / writes and so-called "direct commands" (DCMD). Furthermore
DCMD is limited to one command at a time, but discards require 3 commands.
That makes issuing discards through CQE very awkward, but some CQE's don't
support DCMD anyway. So for discards, the existing non-CQE approach is
taken, where the mmc core code issues the 3 commands one at a time i.e.
mmc_erase(). Where DCMD is used, is for issuing flushes.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/core/block.c | 150 +++++++++++++++++++++++++++++++++++++++++++-
drivers/mmc/core/block.h | 2 +
drivers/mmc/core/queue.c | 158 +++++++++++++++++++++++++++++++++++++++++++++--
drivers/mmc/core/queue.h | 18 ++++++
4 files changed, 322 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index a08d727d100b..2aacd3fa0d1a 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -111,6 +111,7 @@ struct mmc_blk_data {
#define MMC_BLK_WRITE BIT(1)
#define MMC_BLK_DISCARD BIT(2)
#define MMC_BLK_SECDISCARD BIT(3)
+#define MMC_BLK_CQE_RECOVERY BIT(4)
/*
* Only set in main mmc_blk_data associated
@@ -1785,6 +1786,138 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
*do_data_tag_p = do_data_tag;
}
+#define MMC_CQE_RETRIES 2
+
+static void mmc_blk_cqe_complete_rq(struct mmc_queue *mq, struct request *req)
+{
+ struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
+ struct mmc_request *mrq = &mqrq->brq.mrq;
+ struct request_queue *q = req->q;
+ struct mmc_host *host = mq->card->host;
+ unsigned long flags;
+ bool put_card;
+ int err;
+
+ mmc_cqe_post_req(host, mrq);
+
+ if (mrq->cmd && mrq->cmd->error)
+ err = mrq->cmd->error;
+ else if (mrq->data && mrq->data->error)
+ err = mrq->data->error;
+ else
+ err = 0;
+
+ if (err) {
+ if (mqrq->retries++ < MMC_CQE_RETRIES)
+ blk_mq_requeue_request(req, true);
+ else
+ blk_mq_end_request(req, BLK_STS_IOERR);
+ } else if (mrq->data) {
+ if (blk_update_request(req, BLK_STS_OK, mrq->data->bytes_xfered))
+ blk_mq_requeue_request(req, true);
+ else
+ __blk_mq_end_request(req, BLK_STS_OK);
+ } else {
+ blk_mq_end_request(req, BLK_STS_OK);
+ }
+
+ spin_lock_irqsave(q->queue_lock, flags);
+
+ mq->in_flight[mmc_issue_type(mq, req)] -= 1;
+
+ put_card = (mmc_tot_in_flight(mq) == 0);
+
+ mmc_cqe_check_busy(mq);
+
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ if (!mq->cqe_busy)
+ blk_mq_run_hw_queues(q, true);
+
+ if (put_card)
+ mmc_put_card(mq->card, &mq->ctx);
+}
+
+void mmc_blk_cqe_recovery(struct mmc_queue *mq)
+{
+ struct mmc_card *card = mq->card;
+ struct mmc_host *host = card->host;
+ int err;
+
+ pr_debug("%s: CQE recovery start\n", mmc_hostname(host));
+
+ err = mmc_cqe_recovery(host);
+ if (err)
+ mmc_blk_reset(mq->blkdata, host, MMC_BLK_CQE_RECOVERY);
+ else
+ mmc_blk_reset_success(mq->blkdata, MMC_BLK_CQE_RECOVERY);
+
+ pr_debug("%s: CQE recovery done\n", mmc_hostname(host));
+}
+
+static void mmc_blk_cqe_req_done(struct mmc_request *mrq)
+{
+ struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req,
+ brq.mrq);
+ struct request *req = mmc_queue_req_to_req(mqrq);
+ struct request_queue *q = req->q;
+ struct mmc_queue *mq = q->queuedata;
+
+ /*
+ * Block layer timeouts race with completions which means the normal
+ * completion path cannot be used during recovery.
+ */
+ if (mq->in_recovery)
+ mmc_blk_cqe_complete_rq(mq, req);
+ else
+ blk_mq_complete_request(req);
+}
+
+static int mmc_blk_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq)
+{
+ mrq->done = mmc_blk_cqe_req_done;
+ mrq->recovery_notifier = mmc_cqe_recovery_notifier;
+
+ return mmc_cqe_start_req(host, mrq);
+}
+
+static struct mmc_request *mmc_blk_cqe_prep_dcmd(struct mmc_queue_req *mqrq,
+ struct request *req)
+{
+ struct mmc_blk_request *brq = &mqrq->brq;
+
+ memset(brq, 0, sizeof(*brq));
+
+ brq->mrq.cmd = &brq->cmd;
+ brq->mrq.tag = req->tag;
+
+ return &brq->mrq;
+}
+
+static int mmc_blk_cqe_issue_flush(struct mmc_queue *mq, struct request *req)
+{
+ struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
+ struct mmc_request *mrq = mmc_blk_cqe_prep_dcmd(mqrq, req);
+
+ mrq->cmd->opcode = MMC_SWITCH;
+ mrq->cmd->arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_FLUSH_CACHE << 16) |
+ (1 << 8) |
+ EXT_CSD_CMD_SET_NORMAL;
+ mrq->cmd->flags = MMC_CMD_AC | MMC_RSP_R1B;
+
+ return mmc_blk_cqe_start_req(mq->card->host, mrq);
+}
+
+static int mmc_blk_cqe_issue_rw_rq(struct mmc_queue *mq, struct request *req)
+{
+ struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
+
+ mmc_blk_data_prep(mq, mqrq, 0, NULL, NULL);
+
+ return mmc_blk_cqe_start_req(mq->card->host, &mqrq->brq.mrq);
+}
+
static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
struct mmc_card *card,
int disable_multi,
@@ -2059,7 +2192,10 @@ void mmc_blk_mq_complete(struct request *req)
{
struct mmc_queue *mq = req->q->queuedata;
- mmc_blk_mq_complete_rq(mq, req);
+ if (mq->use_cqe)
+ mmc_blk_cqe_complete_rq(mq, req);
+ else
+ mmc_blk_mq_complete_rq(mq, req);
}
static void mmc_blk_mq_poll_completion(struct mmc_queue *mq,
@@ -2218,6 +2354,9 @@ static int mmc_blk_mq_issue_rw_rq(struct mmc_queue *mq,
static int mmc_blk_wait_for_idle(struct mmc_queue *mq, struct mmc_host *host)
{
+ if (mq->use_cqe)
+ return host->cqe_ops->cqe_wait_for_idle(host);
+
return mmc_blk_rw_wait(mq, NULL);
}
@@ -2256,11 +2395,18 @@ enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req)
return MMC_REQ_FAILED_TO_START;
}
return MMC_REQ_FINISHED;
+ case MMC_ISSUE_DCMD:
case MMC_ISSUE_ASYNC:
switch (req_op(req)) {
+ case REQ_OP_FLUSH:
+ ret = mmc_blk_cqe_issue_flush(mq, req);
+ break;
case REQ_OP_READ:
case REQ_OP_WRITE:
- ret = mmc_blk_mq_issue_rw_rq(mq, req);
+ if (mq->use_cqe)
+ ret = mmc_blk_cqe_issue_rw_rq(mq, req);
+ else
+ ret = mmc_blk_mq_issue_rw_rq(mq, req);
break;
default:
WARN_ON_ONCE(1);
diff --git a/drivers/mmc/core/block.h b/drivers/mmc/core/block.h
index 6d34e87b18f6..f472ce5d5647 100644
--- a/drivers/mmc/core/block.h
+++ b/drivers/mmc/core/block.h
@@ -7,6 +7,8 @@
void mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req);
+void mmc_blk_cqe_recovery(struct mmc_queue *mq);
+
enum mmc_issued;
enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req);
diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c
index b9c2430e9292..d0eae15261d7 100644
--- a/drivers/mmc/core/queue.c
+++ b/drivers/mmc/core/queue.c
@@ -40,18 +40,142 @@ static int mmc_prep_request(struct request_queue *q, struct request *req)
return BLKPREP_OK;
}
+static inline bool mmc_cqe_dcmd_busy(struct mmc_queue *mq)
+{
+ /* Allow only 1 DCMD at a time */
+ return mq->in_flight[MMC_ISSUE_DCMD];
+}
+
+void mmc_cqe_check_busy(struct mmc_queue *mq)
+{
+ if ((mq->cqe_busy & MMC_CQE_DCMD_BUSY) && !mmc_cqe_dcmd_busy(mq))
+ mq->cqe_busy &= ~MMC_CQE_DCMD_BUSY;
+
+ mq->cqe_busy &= ~MMC_CQE_QUEUE_FULL;
+}
+
+static inline bool mmc_cqe_can_dcmd(struct mmc_host *host)
+{
+ return host->caps2 & MMC_CAP2_CQE_DCMD;
+}
+
+enum mmc_issue_type mmc_cqe_issue_type(struct mmc_host *host,
+ struct request *req)
+{
+ switch (req_op(req)) {
+ case REQ_OP_DRV_IN:
+ case REQ_OP_DRV_OUT:
+ case REQ_OP_DISCARD:
+ case REQ_OP_SECURE_ERASE:
+ return MMC_ISSUE_SYNC;
+ case REQ_OP_FLUSH:
+ return mmc_cqe_can_dcmd(host) ? MMC_ISSUE_DCMD : MMC_ISSUE_SYNC;
+ default:
+ return MMC_ISSUE_ASYNC;
+ }
+}
+
enum mmc_issue_type mmc_issue_type(struct mmc_queue *mq, struct request *req)
{
+ struct mmc_host *host = mq->card->host;
+
+ if (mq->use_cqe)
+ return mmc_cqe_issue_type(host, req);
+
if (req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_WRITE)
return MMC_ISSUE_ASYNC;
return MMC_ISSUE_SYNC;
}
+static void __mmc_cqe_recovery_notifier(struct mmc_queue *mq)
+{
+ if (!mq->recovery_needed) {
+ mq->recovery_needed = true;
+ schedule_work(&mq->recovery_work);
+ }
+}
+
+void mmc_cqe_recovery_notifier(struct mmc_request *mrq)
+{
+ struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req,
+ brq.mrq);
+ struct request *req = mmc_queue_req_to_req(mqrq);
+ struct request_queue *q = req->q;
+ struct mmc_queue *mq = q->queuedata;
+ unsigned long flags;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ __mmc_cqe_recovery_notifier(mq);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
+static enum blk_eh_timer_return mmc_cqe_timed_out(struct request *req)
+{
+ struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req);
+ struct mmc_request *mrq = &mqrq->brq.mrq;
+ struct mmc_queue *mq = req->q->queuedata;
+ struct mmc_host *host = mq->card->host;
+ enum mmc_issue_type issue_type = mmc_issue_type(mq, req);
+ bool recovery_needed = false;
+
+ switch (issue_type) {
+ case MMC_ISSUE_ASYNC:
+ case MMC_ISSUE_DCMD:
+ if (host->cqe_ops->cqe_timeout(host, mrq, &recovery_needed)) {
+ if (recovery_needed)
+ __mmc_cqe_recovery_notifier(mq);
+ return BLK_EH_RESET_TIMER;
+ }
+ /* No timeout */
+ return BLK_EH_HANDLED;
+ default:
+ /* Timeout is handled by mmc core */
+ return BLK_EH_RESET_TIMER;
+ }
+}
+
static enum blk_eh_timer_return mmc_mq_timed_out(struct request *req,
bool reserved)
{
- return BLK_EH_RESET_TIMER;
+ struct request_queue *q = req->q;
+ struct mmc_queue *mq = q->queuedata;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+
+ if (mq->recovery_needed || !mq->use_cqe)
+ ret = BLK_EH_RESET_TIMER;
+ else
+ ret = mmc_cqe_timed_out(req);
+
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ return ret;
+}
+
+static void mmc_mq_recovery_handler(struct work_struct *work)
+{
+ struct mmc_queue *mq = container_of(work, struct mmc_queue,
+ recovery_work);
+ struct request_queue *q = mq->queue;
+
+ mmc_get_card(mq->card, &mq->ctx);
+
+ mq->in_recovery = true;
+
+ mmc_blk_cqe_recovery(mq);
+
+ mq->in_recovery = false;
+
+ spin_lock_irq(q->queue_lock);
+ mq->recovery_needed = false;
+ spin_unlock_irq(q->queue_lock);
+
+ mmc_put_card(mq->card, &mq->ctx);
+
+ blk_mq_run_hw_queues(q, true);
}
static int mmc_queue_thread(void *d)
@@ -219,9 +343,10 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
struct request_queue *q = req->q;
struct mmc_queue *mq = q->queuedata;
struct mmc_card *card = mq->card;
+ struct mmc_host *host = card->host;
enum mmc_issue_type issue_type;
enum mmc_issued issued;
- bool get_card;
+ bool get_card, cqe_retune_ok;
int ret;
if (mmc_card_removed(mq->card)) {
@@ -233,7 +358,19 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
spin_lock_irq(q->queue_lock);
+ if (mq->recovery_needed) {
+ spin_unlock_irq(q->queue_lock);
+ return BLK_STS_RESOURCE;
+ }
+
switch (issue_type) {
+ case MMC_ISSUE_DCMD:
+ if (mmc_cqe_dcmd_busy(mq)) {
+ mq->cqe_busy |= MMC_CQE_DCMD_BUSY;
+ spin_unlock_irq(q->queue_lock);
+ return BLK_STS_RESOURCE;
+ }
+ break;
case MMC_ISSUE_ASYNC:
break;
default:
@@ -250,6 +387,7 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
mq->in_flight[issue_type] += 1;
get_card = (mmc_tot_in_flight(mq) == 1);
+ cqe_retune_ok = (mmc_cqe_qcnt(mq) == 1);
spin_unlock_irq(q->queue_lock);
@@ -261,6 +399,11 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
if (get_card)
mmc_get_card(card, &mq->ctx);
+ if (mq->use_cqe) {
+ host->retune_now = host->need_retune && cqe_retune_ok &&
+ !host->hold_retune;
+ }
+
blk_mq_start_request(req);
issued = mmc_blk_mq_issue_rq(mq, req);
@@ -322,6 +465,7 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card)
/* Initialize thread_sem even if it is not used */
sema_init(&mq->thread_sem, 1);
+ INIT_WORK(&mq->recovery_work, mmc_mq_recovery_handler);
INIT_WORK(&mq->complete_work, mmc_blk_mq_complete_work);
mutex_init(&mq->complete_lock);
@@ -370,10 +514,14 @@ static int mmc_mq_init_queue(struct mmc_queue *mq, int q_depth,
static int mmc_mq_init(struct mmc_queue *mq, struct mmc_card *card,
spinlock_t *lock)
{
+ struct mmc_host *host = card->host;
int q_depth;
int ret;
- q_depth = MMC_QUEUE_DEPTH;
+ if (mq->use_cqe)
+ q_depth = min_t(int, card->ext_csd.cmdq_depth, host->cqe_qdepth);
+ else
+ q_depth = MMC_QUEUE_DEPTH;
ret = mmc_mq_init_queue(mq, q_depth, &mmc_mq_ops, lock);
if (ret)
@@ -403,7 +551,9 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
mq->card = card;
- if (mmc_host_use_blk_mq(host))
+ mq->use_cqe = host->cqe_enabled;
+
+ if (mq->use_cqe || mmc_host_use_blk_mq(host))
return mmc_mq_init(mq, card, lock);
mq->queue = blk_alloc_queue(GFP_KERNEL);
diff --git a/drivers/mmc/core/queue.h b/drivers/mmc/core/queue.h
index ce9249852f26..1d7d3b0afff8 100644
--- a/drivers/mmc/core/queue.h
+++ b/drivers/mmc/core/queue.h
@@ -17,6 +17,7 @@ enum mmc_issued {
enum mmc_issue_type {
MMC_ISSUE_SYNC,
+ MMC_ISSUE_DCMD,
MMC_ISSUE_ASYNC,
MMC_ISSUE_MAX,
};
@@ -92,8 +93,15 @@ struct mmc_queue {
int qcnt;
int in_flight[MMC_ISSUE_MAX];
+ unsigned int cqe_busy;
+#define MMC_CQE_DCMD_BUSY BIT(0)
+#define MMC_CQE_QUEUE_FULL BIT(1)
+ bool use_cqe;
+ bool recovery_needed;
+ bool in_recovery;
bool rw_wait;
bool waiting;
+ struct work_struct recovery_work;
wait_queue_head_t wait;
struct request *complete_req;
struct mutex complete_lock;
@@ -108,11 +116,21 @@ extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *,
extern unsigned int mmc_queue_map_sg(struct mmc_queue *,
struct mmc_queue_req *);
+void mmc_cqe_check_busy(struct mmc_queue *mq);
+void mmc_cqe_recovery_notifier(struct mmc_request *mrq);
+
enum mmc_issue_type mmc_issue_type(struct mmc_queue *mq, struct request *req);
static inline int mmc_tot_in_flight(struct mmc_queue *mq)
{
return mq->in_flight[MMC_ISSUE_SYNC] +
+ mq->in_flight[MMC_ISSUE_DCMD] +
+ mq->in_flight[MMC_ISSUE_ASYNC];
+}
+
+static inline int mmc_cqe_qcnt(struct mmc_queue *mq)
+{
+ return mq->in_flight[MMC_ISSUE_DCMD] +
mq->in_flight[MMC_ISSUE_ASYNC];
}
--
1.9.1
next prev parent reply other threads:[~2017-11-21 13:44 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-21 13:42 [PATCH V14 00/24] mmc: Add Command Queue support Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 01/24] mmc: block: Fix missing blk_put_request() Adrian Hunter
2017-11-23 9:41 ` Linus Walleij
2017-11-23 18:12 ` Ulf Hansson
2017-11-21 13:42 ` [PATCH V14 02/24] mmc: block: Check return value of blk_get_request() Adrian Hunter
2017-11-23 9:56 ` Linus Walleij
2017-11-23 18:12 ` Ulf Hansson
2017-11-21 13:42 ` [PATCH V14 03/24] mmc: core: Do not leave the block driver in a suspended state Adrian Hunter
2017-11-23 9:58 ` Linus Walleij
2017-11-23 18:12 ` Ulf Hansson
2017-11-21 13:42 ` [PATCH V14 04/24] mmc: block: Ensure that debugfs files are removed Adrian Hunter
2017-11-23 13:22 ` Linus Walleij
2017-11-23 18:13 ` Ulf Hansson
2017-11-21 13:42 ` [PATCH V14 05/24] mmc: block: No need to export mmc_cleanup_queue() Adrian Hunter
2017-11-23 13:23 ` Linus Walleij
2017-11-21 13:42 ` [PATCH V14 06/24] mmc: block: Simplify cleaning up the queue Adrian Hunter
2017-11-23 13:27 ` Linus Walleij
2017-11-21 13:42 ` [PATCH V14 07/24] mmc: block: Use data timeout in card_busy_detect() Adrian Hunter
2017-11-21 15:39 ` Ulf Hansson
2017-11-22 7:40 ` Adrian Hunter
2017-11-22 14:43 ` Ulf Hansson
2017-11-23 11:37 ` Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 08/24] mmc: block: Check for transfer state " Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 09/24] mmc: block: Make card_busy_detect() accumulate all response error bits Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 10/24] mmc: core: Make mmc_pre_req() and mmc_post_req() available Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 11/24] mmc: block: Add error-handling comments Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 12/24] mmc: core: Add parameter use_blk_mq Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 13/24] mmc: block: Add blk-mq support Adrian Hunter
2017-11-24 10:12 ` Ulf Hansson
2017-11-27 10:20 ` Adrian Hunter
2017-11-27 11:23 ` Ulf Hansson
2017-11-27 14:15 ` Adrian Hunter
2017-11-28 10:58 ` Ulf Hansson
2017-11-27 11:36 ` Ulf Hansson
2017-11-21 13:42 ` Adrian Hunter [this message]
2017-11-28 11:20 ` [PATCH V14 14/24] mmc: block: Add CQE support Ulf Hansson
2017-11-21 13:42 ` [PATCH V14 15/24] mmc: cqhci: support for command queue enabled host Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 16/24] mmc: sdhci-pci: Add CQHCI support for Intel GLK Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 17/24] mmc: block: blk-mq: Add support for direct completion Adrian Hunter
2017-11-28 19:02 ` Ulf Hansson
2017-11-21 13:42 ` [PATCH V14 18/24] mmc: block: blk-mq: Separate card polling from recovery Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 19/24] mmc: block: blk-mq: Check error bits and save the exception bit when polling card busy Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 20/24] mmc: block: blk-mq: Stop using legacy recovery Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 21/24] mmc: mmc_test: Do not use mmc_start_areq() anymore Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 22/24] mmc: core: Remove option not to use blk-mq Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 23/24] mmc: block: Remove code no longer needed after the switch to blk-mq Adrian Hunter
2017-11-21 13:42 ` [PATCH V14 24/24] mmc: core: " Adrian Hunter
2017-11-28 9:42 ` [PATCH V14 00/24] mmc: Add Command Queue support Linus Walleij
2017-11-28 19:15 ` Ulf Hansson
2017-11-28 19:23 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511271770-3444-15-git-send-email-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Yuliy.Izrailov@sandisk.com \
--cc=alex.lemberg@sandisk.com \
--cc=asutoshd@codeaurora.org \
--cc=b.zolnierkie@samsung.com \
--cc=dongas86@gmail.com \
--cc=haibo.chen@nxp.com \
--cc=hch@lst.de \
--cc=jh80.chung@samsung.com \
--cc=linus.walleij@linaro.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mateusz.nowak@intel.com \
--cc=riteshh@codeaurora.org \
--cc=shawn.lin@rock-chips.com \
--cc=stummala@codeaurora.org \
--cc=ulf.hansson@linaro.org \
--cc=vbyravarasu@nvidia.com \
--cc=zhangfei.gao@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).