From: "Javier González" <javier@javigon.com>
To: mb@lightnvm.io
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
"Javier González" <javier@cnexlabs.com>
Subject: [PATCH 04/12] lightnvm: complete geo structure with maxoc*
Date: Fri, 2 Mar 2018 16:21:12 +0100 [thread overview]
Message-ID: <1520004080-27760-5-git-send-email-javier@cnexlabs.com> (raw)
In-Reply-To: <1520004080-27760-1-git-send-email-javier@cnexlabs.com>
Complete the generic geometry structure with the maxoc and maxocpu
felds, present in the 2.0 spec. Also, expose them through sysfs.
Signed-off-by: Javier González <javier@cnexlabs.com>
---
drivers/nvme/host/lightnvm.c | 17 +++++++++++++++++
include/linux/lightnvm.h | 2 ++
2 files changed, 19 insertions(+)
diff --git a/drivers/nvme/host/lightnvm.c b/drivers/nvme/host/lightnvm.c
index f7f7769e7588..41b38ebdb1f3 100644
--- a/drivers/nvme/host/lightnvm.c
+++ b/drivers/nvme/host/lightnvm.c
@@ -323,6 +323,13 @@ static int nvme_nvm_setup_12(struct nvme_nvm_id12 *id,
geo->ws_opt = sec_per_pg;
geo->mw_cunits = geo->ws_opt << 3; /* default to MLC safe values */
+ /* Do not impose values for maximum number of open blocks as it is
+ * unspecified in 1.2. Users of 1.2 must be aware of this and eventually
+ * specify these values through a quirk if restrictions apply.
+ */
+ geo->maxoc = geo->all_luns * geo->nr_chks;
+ geo->maxocpu = geo->nr_chks;
+
geo->mccap = le32_to_cpu(src->mccap);
geo->trdt = le32_to_cpu(src->trdt);
@@ -409,6 +416,8 @@ static int nvme_nvm_setup_20(struct nvme_nvm_id20 *id,
geo->ws_min = le32_to_cpu(id->ws_min);
geo->ws_opt = le32_to_cpu(id->ws_opt);
geo->mw_cunits = le32_to_cpu(id->mw_cunits);
+ geo->maxoc = le32_to_cpu(id->maxoc);
+ geo->maxocpu = le32_to_cpu(id->maxocpu);
geo->trdt = le32_to_cpu(id->trdt);
geo->trdm = le32_to_cpu(id->trdm);
@@ -1050,6 +1059,10 @@ static ssize_t nvm_dev_attr_show_20(struct device *dev,
return scnprintf(page, PAGE_SIZE, "%u\n", geo->ws_min);
} else if (strcmp(attr->name, "ws_opt") == 0) {
return scnprintf(page, PAGE_SIZE, "%u\n", geo->ws_opt);
+ } else if (strcmp(attr->name, "maxoc") == 0) {
+ return scnprintf(page, PAGE_SIZE, "%u\n", geo->maxoc);
+ } else if (strcmp(attr->name, "maxocpu") == 0) {
+ return scnprintf(page, PAGE_SIZE, "%u\n", geo->maxocpu);
} else if (strcmp(attr->name, "mw_cunits") == 0) {
return scnprintf(page, PAGE_SIZE, "%u\n", geo->mw_cunits);
} else if (strcmp(attr->name, "write_typ") == 0) {
@@ -1147,6 +1160,8 @@ static NVM_DEV_ATTR_20_RO(chunks);
static NVM_DEV_ATTR_20_RO(clba);
static NVM_DEV_ATTR_20_RO(ws_min);
static NVM_DEV_ATTR_20_RO(ws_opt);
+static NVM_DEV_ATTR_20_RO(maxoc);
+static NVM_DEV_ATTR_20_RO(maxocpu);
static NVM_DEV_ATTR_20_RO(mw_cunits);
static NVM_DEV_ATTR_20_RO(write_typ);
static NVM_DEV_ATTR_20_RO(write_max);
@@ -1163,6 +1178,8 @@ static struct attribute *nvm_dev_attrs_20[] = {
&dev_attr_clba.attr,
&dev_attr_ws_min.attr,
&dev_attr_ws_opt.attr,
+ &dev_attr_maxoc.attr,
+ &dev_attr_maxocpu.attr,
&dev_attr_mw_cunits.attr,
&dev_attr_read_typ.attr,
diff --git a/include/linux/lightnvm.h b/include/linux/lightnvm.h
index a073c0c76260..870959a58fef 100644
--- a/include/linux/lightnvm.h
+++ b/include/linux/lightnvm.h
@@ -296,6 +296,8 @@ struct nvm_geo {
u32 ws_min; /* minimum write size */
u32 ws_opt; /* optimal write size */
u32 mw_cunits; /* distance required for successful read */
+ u32 maxoc; /* maximum open chunks */
+ u32 maxocpu; /* maximum open chunks per parallel unit */
/* device capabilities */
u32 mccap;
--
2.7.4
next prev parent reply other threads:[~2018-03-02 15:22 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-02 15:21 [PATCH V5 00/12] lightnvm: pblk: implement 2.0 support Javier González
2018-03-02 15:21 ` [PATCH 01/12] lightnvm: simplify geometry structure Javier González
2018-03-05 13:07 ` Matias Bjørling
2018-03-05 13:30 ` Javier González
2018-03-02 15:21 ` [PATCH 02/12] lightnvm: add minor version to generic geometry Javier González
2018-03-02 15:21 ` [PATCH 03/12] lightnvm: add shorten OCSSD version in geo Javier González
2018-03-02 15:21 ` Javier González [this message]
2018-03-02 15:21 ` [PATCH 05/12] lightnvm: normalize geometry nomenclature Javier González
2018-03-02 15:21 ` [PATCH 06/12] lightnvm: add support for 2.0 address format Javier González
2018-03-02 15:21 ` [PATCH 07/12] lightnvm: make address conversions depend on generic device Javier González
2018-03-02 15:21 ` [PATCH 08/12] lightnvm: implement get log report chunk helpers Javier González
2018-03-21 10:06 ` Matias Bjørling
2018-03-21 14:36 ` Keith Busch
2018-03-21 19:27 ` Matias Bjørling
2018-03-21 20:49 ` Javier Gonzalez
2018-03-02 15:21 ` [PATCH 09/12] lightnvm: pblk: check for supported version Javier González
2018-03-02 15:21 ` [PATCH 10/12] lightnvm: pblk: rename ppaf* to addrf* Javier González
2018-03-02 15:21 ` [PATCH 11/12] lightnvm: pblk: implement get log report chunk Javier González
2018-03-02 15:21 ` [PATCH 12/12] lightnvm: pblk: implement 2.0 support Javier González
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1520004080-27760-5-git-send-email-javier@cnexlabs.com \
--to=javier@javigon.com \
--cc=javier@cnexlabs.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mb@lightnvm.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).