From: Michael Schmitz <schmitzmic@gmail.com>
To: linux-block@vger.kernel.org, axboe@kernel.dk
Cc: linux-m68k@vger.kernel.org, geert@linux-m68k.org,
Michael Schmitz <schmitzmic@gmail.com>
Subject: [PATCH v6 1/2] block: fix signed int overflow in Amiga partition support
Date: Sun, 14 Oct 2018 17:48:34 +1300 [thread overview]
Message-ID: <1539492515-1782-2-git-send-email-schmitzmic@gmail.com> (raw)
In-Reply-To: <1539492515-1782-1-git-send-email-schmitzmic@gmail.com>
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use sector_t as type for sector address and size to allow using disks
up to 2 TB without LBD support, and disks larger than 2 TB with LBD.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted. This patch differs from Joanne's patch only in its use of
sector_t instead of unsigned int. No checking for overflows is done
(see patch 2 of this series for that).
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Martin Steigerwald <Martin@lichtvoll.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
Changes from v3:
- split off change of sector address type as quick fix.
- cast to sector_t in sector address calculations.
- move overflow checking to separate patch for more thorough review.
Changes from v4:
Andreas Schwab:
- correct cast to sector_t in sector address calculations
---
block/partitions/amiga.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/block/partitions/amiga.c b/block/partitions/amiga.c
index 5609366..7ea9540 100644
--- a/block/partitions/amiga.c
+++ b/block/partitions/amiga.c
@@ -32,7 +32,8 @@ int amiga_partition(struct parsed_partitions *state)
unsigned char *data;
struct RigidDiskBlock *rdb;
struct PartitionBlock *pb;
- int start_sect, nr_sects, blk, part, res = 0;
+ sector_t start_sect, nr_sects;
+ int blk, part, res = 0;
int blksize = 1; /* Multiplier for disk block size */
int slot = 1;
char b[BDEVNAME_SIZE];
@@ -100,14 +101,14 @@ int amiga_partition(struct parsed_partitions *state)
/* Tell Kernel about it */
- nr_sects = (be32_to_cpu(pb->pb_Environment[10]) + 1 -
- be32_to_cpu(pb->pb_Environment[9])) *
+ nr_sects = ((sector_t) be32_to_cpu(pb->pb_Environment[10])
+ + 1 - be32_to_cpu(pb->pb_Environment[9])) *
be32_to_cpu(pb->pb_Environment[3]) *
be32_to_cpu(pb->pb_Environment[5]) *
blksize;
if (!nr_sects)
continue;
- start_sect = be32_to_cpu(pb->pb_Environment[9]) *
+ start_sect = (sector_t) be32_to_cpu(pb->pb_Environment[9]) *
be32_to_cpu(pb->pb_Environment[3]) *
be32_to_cpu(pb->pb_Environment[5]) *
blksize;
--
1.9.1
next prev parent reply other threads:[~2018-10-14 4:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-14 4:48 [PATCH v6 0/2] Michael Schmitz
2018-10-14 4:48 ` Michael Schmitz [this message]
2018-10-14 4:48 ` [PATCH v6 2/2] block: add overflow checks for Amiga partition support Michael Schmitz
2018-10-14 10:42 ` Geert Uytterhoeven
2018-10-15 0:11 ` Michael Schmitz
2018-10-14 4:51 ` [PATCH v6 0/2] Amiga RDB partition support fixes Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1539492515-1782-2-git-send-email-schmitzmic@gmail.com \
--to=schmitzmic@gmail.com \
--cc=axboe@kernel.dk \
--cc=geert@linux-m68k.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).