From: Ming Lei <ming.lei@redhat.com>
To: Jens Axboe <axboe@kernel.dk>, Keith Busch <keith.busch@intel.com>,
Christoph Hellwig <hch@lst.de>, Sagi Grimberg <sagi@grimberg.me>
Cc: linux-nvme@lists.infradead.org, Zhang Yi <yizhan@redhat.com>,
linux-block@vger.kernel.org, Ming Lei <ming.lei@redhat.com>,
stable@vger.kernel.org
Subject: [PATCH 1/2] nvme: fix race between removing and reseting failure
Date: Wed, 17 May 2017 09:27:28 +0800 [thread overview]
Message-ID: <20170517012729.13469-2-ming.lei@redhat.com> (raw)
In-Reply-To: <20170517012729.13469-1-ming.lei@redhat.com>
When one NVMe PCI device is being resetted and found reset failue,
nvme_remove_dead_ctrl() is called to handle the failure: blk-mq hw queues
are put into stopped first, then schedule .remove_work to release the driver.
Unfortunately if the driver is being released via sysfs store
just before the .remove_work is run, del_gendisk() from
nvme_remove() may hang forever because hw queues are stopped and
the submitted writeback IOs from fsync_bdev() can't be completed at all.
This patch fixes the following issue[1][2] by moving nvme_kill_queues()
into nvme_remove_dead_ctrl() to avoid the issue because nvme_remove()
flushs .reset_work, and this way is reasonable and safe because
nvme_dev_disable() has started to suspend queues and canceled requests
already.
[1] test script
fio -filename=$NVME_DISK -iodepth=1 -thread -rw=randwrite -ioengine=psync \
-bssplit=5k/10:9k/10:13k/10:17k/10:21k/10:25k/10:29k/10:33k/10:37k/10:41k/10 \
-bs_unaligned -runtime=1200 -size=-group_reporting -name=mytest -numjobs=60
sleep 35
echo 1 > $SYSFS_NVME_PCI_PATH/rescan
echo 1 > $SYSFS_NVME_PCI_PATH/reset
echo 1 > $SYSFS_NVME_PCI_PATH/remove
echo 1 > /sys/bus/pci/rescan
[2] kernel hang log
[ 492.232593] INFO: task nvme-test:5939 blocked for more than 120 seconds.
[ 492.240081] Not tainted 4.11.0.nvme_v4.11_debug_hang+ #3
[ 492.246600] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 492.255346] nvme-test D 0 5939 5938 0x00000080
[ 492.261475] Call Trace:
[ 492.264215] __schedule+0x289/0x8f0
[ 492.268105] ? write_cache_pages+0x14c/0x510
[ 492.272873] schedule+0x36/0x80
[ 492.276381] io_schedule+0x16/0x40
[ 492.280181] wait_on_page_bit_common+0x137/0x220
[ 492.285336] ? page_cache_tree_insert+0x120/0x120
[ 492.290589] __filemap_fdatawait_range+0x128/0x1a0
[ 492.295941] filemap_fdatawait_range+0x14/0x30
[ 492.300902] filemap_fdatawait+0x23/0x30
[ 492.305282] filemap_write_and_wait+0x4c/0x80
[ 492.310151] __sync_blockdev+0x1f/0x40
[ 492.314336] fsync_bdev+0x44/0x50
[ 492.318039] invalidate_partition+0x24/0x50
[ 492.322710] del_gendisk+0xcd/0x2e0
[ 492.326608] nvme_ns_remove+0x105/0x130 [nvme_core]
[ 492.332054] nvme_remove_namespaces+0x32/0x50 [nvme_core]
[ 492.338082] nvme_uninit_ctrl+0x2d/0xa0 [nvme_core]
[ 492.343519] nvme_remove+0x5d/0x170 [nvme]
[ 492.348096] pci_device_remove+0x39/0xc0
[ 492.352477] device_release_driver_internal+0x141/0x1f0
[ 492.358311] device_release_driver+0x12/0x20
[ 492.363072] pci_stop_bus_device+0x8c/0xa0
[ 492.367646] pci_stop_and_remove_bus_device_locked+0x1a/0x30
[ 492.373965] remove_store+0x7c/0x90
[ 492.377852] dev_attr_store+0x18/0x30
[ 492.381941] sysfs_kf_write+0x3a/0x50
[ 492.386028] kernfs_fop_write+0xff/0x180
[ 492.390409] __vfs_write+0x37/0x160
[ 492.394304] ? selinux_file_permission+0xe5/0x120
[ 492.399556] ? security_file_permission+0x3b/0xc0
[ 492.404807] vfs_write+0xb2/0x1b0
[ 492.408508] ? syscall_trace_enter+0x1d0/0x2b0
[ 492.413462] SyS_write+0x55/0xc0
[ 492.417064] do_syscall_64+0x67/0x180
[ 492.421155] entry_SYSCALL64_slow_path+0x25/0x25
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
---
drivers/nvme/host/pci.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index fed803232edc..5e39abe57c56 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1887,6 +1887,14 @@ static void nvme_remove_dead_ctrl(struct nvme_dev *dev, int status)
kref_get(&dev->ctrl.kref);
nvme_dev_disable(dev, false);
+
+ /*
+ * nvme_dev_disable() has suspended queues, then no new I/O
+ * can be submitted to hardware successfully any more, so
+ * kill queues now for avoiding race between reset failure
+ * and remove.
+ */
+ nvme_kill_queues(&dev->ctrl);
if (!schedule_work(&dev->remove_work))
nvme_put_ctrl(&dev->ctrl);
}
@@ -1993,7 +2001,6 @@ static void nvme_remove_dead_ctrl_work(struct work_struct *work)
struct nvme_dev *dev = container_of(work, struct nvme_dev, remove_work);
struct pci_dev *pdev = to_pci_dev(dev->dev);
- nvme_kill_queues(&dev->ctrl);
if (pci_get_drvdata(pdev))
device_release_driver(&pdev->dev);
nvme_put_ctrl(&dev->ctrl);
--
2.9.3
next prev parent reply other threads:[~2017-05-17 1:27 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-17 1:27 [PATCH 0/2] nvme: fix hang in path of removing disk Ming Lei
2017-05-17 1:27 ` Ming Lei [this message]
2017-05-17 6:38 ` [PATCH 1/2] nvme: fix race between removing and reseting failure Johannes Thumshirn
2017-05-17 7:01 ` Ming Lei
2017-05-18 13:47 ` Christoph Hellwig
2017-05-18 15:04 ` Ming Lei
2017-05-18 14:13 ` Keith Busch
2017-05-19 12:52 ` Ming Lei
2017-05-19 15:15 ` Keith Busch
2017-05-19 14:41 ` Jens Axboe
2017-05-19 15:10 ` Ming Lei
2017-05-19 16:40 ` Ming Lei
2017-05-19 16:55 ` yizhan
2017-05-17 1:27 ` [PATCH 2/2] nvme: avoid to hang in remove disk Ming Lei
2017-05-18 13:49 ` Christoph Hellwig
2017-05-18 15:35 ` Ming Lei
2017-05-18 16:06 ` Keith Busch
2017-05-19 13:19 ` Ming Lei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170517012729.13469-2-ming.lei@redhat.com \
--to=ming.lei@redhat.com \
--cc=axboe@kernel.dk \
--cc=hch@lst.de \
--cc=keith.busch@intel.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=sagi@grimberg.me \
--cc=stable@vger.kernel.org \
--cc=yizhan@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).