From: Christoph Hellwig <hch@lst.de>
To: linux-nvme@lists.infradead.org
Cc: Jens Axboe <axboe@kernel.dk>, Keith Busch <keith.busch@intel.com>,
Sagi Grimberg <sagi@grimberg.me>, Hannes Reinecke <hare@suse.de>,
linux-block@vger.kernel.org
Subject: [PATCH 07/14] nvmet: split log page implementation
Date: Sat, 26 May 2018 12:27:28 +0200 [thread overview]
Message-ID: <20180526102735.31404-8-hch@lst.de> (raw)
In-Reply-To: <20180526102735.31404-1-hch@lst.de>
Remove the common code to allocate a buffer and copy it into the SGL.
Instead the two no-op implementations just zero the SGL directly, and
the smart log allocates a buffer on its own. This prepares for the
more elaborate ANA log page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/nvme/target/admin-cmd.c | 99 ++++++++++++---------------------
1 file changed, 36 insertions(+), 63 deletions(-)
diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
index b2ba95b2eef7..e96bb02c4f2c 100644
--- a/drivers/nvme/target/admin-cmd.c
+++ b/drivers/nvme/target/admin-cmd.c
@@ -32,6 +32,11 @@ u32 nvmet_get_log_page_len(struct nvme_command *cmd)
return len;
}
+static void nvmet_execute_get_log_page_noop(struct nvmet_req *req)
+{
+ nvmet_req_complete(req, nvmet_zero_sgl(req, 0, req->data_len));
+}
+
static u16 nvmet_get_smart_log_nsid(struct nvmet_req *req,
struct nvme_smart_log *slog)
{
@@ -97,74 +102,26 @@ static u16 nvmet_get_smart_log_all(struct nvmet_req *req,
return NVME_SC_SUCCESS;
}
-static u16 nvmet_get_smart_log(struct nvmet_req *req,
- struct nvme_smart_log *slog)
-{
- u16 status;
-
- WARN_ON(req == NULL || slog == NULL);
- if (req->cmd->get_log_page.nsid == cpu_to_le32(NVME_NSID_ALL))
- status = nvmet_get_smart_log_all(req, slog);
- else
- status = nvmet_get_smart_log_nsid(req, slog);
- return status;
-}
-
-static void nvmet_execute_get_log_page(struct nvmet_req *req)
+static void nvmet_execute_get_log_page_smart(struct nvmet_req *req)
{
- struct nvme_smart_log *smart_log;
- size_t data_len = nvmet_get_log_page_len(req->cmd);
- void *buf;
- u16 status = 0;
+ struct nvme_smart_log *log;
+ u16 status = NVME_SC_INTERNAL;
- buf = kzalloc(data_len, GFP_KERNEL);
- if (!buf) {
- status = NVME_SC_INTERNAL;
+ if (req->data_len != sizeof(*log))
goto out;
- }
- switch (req->cmd->get_log_page.lid) {
- case NVME_LOG_ERROR:
- /*
- * We currently never set the More bit in the status field,
- * so all error log entries are invalid and can be zeroed out.
- * This is called a minum viable implementation (TM) of this
- * mandatory log page.
- */
- break;
- case NVME_LOG_SMART:
- /*
- * XXX: fill out actual smart log
- *
- * We might have a hard time coming up with useful values for
- * many of the fields, and even when we have useful data
- * available (e.g. units or commands read/written) those aren't
- * persistent over power loss.
- */
- if (data_len != sizeof(*smart_log)) {
- status = NVME_SC_INTERNAL;
- goto err;
- }
- smart_log = buf;
- status = nvmet_get_smart_log(req, smart_log);
- if (status)
- goto err;
- break;
- case NVME_LOG_FW_SLOT:
- /*
- * We only support a single firmware slot which always is
- * active, so we can zero out the whole firmware slot log and
- * still claim to fully implement this mandatory log page.
- */
- break;
- default:
- BUG();
- }
+ log = kzalloc(sizeof(*log), GFP_KERNEL);
+ if (!log)
+ goto out;
- status = nvmet_copy_to_sgl(req, 0, buf, data_len);
+ if (req->cmd->get_log_page.nsid == cpu_to_le32(NVME_NSID_ALL))
+ status = nvmet_get_smart_log_all(req, log);
+ else
+ status = nvmet_get_smart_log_nsid(req, log);
+ if (status)
+ goto out;
-err:
- kfree(buf);
+ status = nvmet_copy_to_sgl(req, 0, log, sizeof(*log));
out:
nvmet_req_complete(req, status);
}
@@ -566,9 +523,25 @@ u16 nvmet_parse_admin_cmd(struct nvmet_req *req)
switch (cmd->get_log_page.lid) {
case NVME_LOG_ERROR:
+ /*
+ * We currently never set the More bit in the status
+ * field, so all error log entries are invalid and can
+ * be zeroed out. This is called a minum viable
+ * implementation (TM) of this mandatory log page.
+ */
+ req->execute = nvmet_execute_get_log_page_noop;
+ return 0;
case NVME_LOG_SMART:
+ req->execute = nvmet_execute_get_log_page_smart;
+ return 0;
case NVME_LOG_FW_SLOT:
- req->execute = nvmet_execute_get_log_page;
+ /*
+ * We only support a single firmware slot which always
+ * is active, so we can zero out the whole firmware slot
+ * log and still claim to fully implement this mandatory
+ * log page.
+ */
+ req->execute = nvmet_execute_get_log_page_noop;
return 0;
}
break;
--
2.17.0
next prev parent reply other threads:[~2018-05-26 10:27 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-26 10:27 nvme/nvmet AEN and log page fixups Christoph Hellwig
2018-05-26 10:27 ` [PATCH 01/14] block: unexport check_disk_size_change Christoph Hellwig
2018-05-28 6:33 ` Johannes Thumshirn
2018-05-26 10:27 ` [PATCH 02/14] block: don't print a message when the device went away Christoph Hellwig
2018-05-28 6:34 ` Johannes Thumshirn
2018-05-26 10:27 ` [PATCH 03/14] nvme.h: untangle AEN notice definitions Christoph Hellwig
2018-05-28 6:35 ` Johannes Thumshirn
2018-05-26 10:27 ` [PATCH 04/14] nvme.h: add the changed namespace list log Christoph Hellwig
2018-05-28 6:35 ` Johannes Thumshirn
2018-05-26 10:27 ` [PATCH 05/14] nvme.h: add AER configuration symbols Christoph Hellwig
2018-05-28 6:35 ` Johannes Thumshirn
2018-05-26 10:27 ` [PATCH 06/14] nvmet: add a new nvmet_zero_sgl helper Christoph Hellwig
2018-05-28 6:36 ` Johannes Thumshirn
2018-05-29 8:13 ` Christoph Hellwig
2018-05-26 10:27 ` Christoph Hellwig [this message]
2018-05-28 6:38 ` [PATCH 07/14] nvmet: split log page implementation Johannes Thumshirn
2018-05-26 10:27 ` [PATCH 08/14] nvmet: implement the changed namespaces log Christoph Hellwig
2018-05-28 6:53 ` Johannes Thumshirn
2018-05-29 8:17 ` Christoph Hellwig
2018-05-29 8:16 ` Johannes Thumshirn
2018-05-29 8:24 ` Christoph Hellwig
2018-05-29 16:59 ` Verkamp, Daniel
2018-05-29 17:24 ` Christoph Hellwig
2018-05-29 20:44 ` Daniel Verkamp
2018-05-26 10:27 ` [PATCH 09/14] nvmet: Add AEN configuration support Christoph Hellwig
2018-05-28 6:54 ` Johannes Thumshirn
2018-05-29 17:15 ` Verkamp, Daniel
2018-05-29 17:29 ` Christoph Hellwig
2018-05-29 17:35 ` Verkamp, Daniel
2018-05-29 17:45 ` Christoph Hellwig
2018-05-26 10:27 ` [PATCH 10/14] nvmet: mask pending AERs Christoph Hellwig
2018-05-28 6:56 ` Johannes Thumshirn
2018-05-26 10:27 ` [PATCH 11/14] nvme: submit AEN event configuration on startup Christoph Hellwig
2018-05-28 6:56 ` Johannes Thumshirn
2018-05-26 10:27 ` [PATCH 12/14] nvme: mark nvme_queue_scan static Christoph Hellwig
2018-05-28 6:57 ` Johannes Thumshirn
2018-05-26 10:27 ` [PATCH 13/14] nvme: use the changed namespaces list log to clear ns data changed AENs Christoph Hellwig
2018-05-26 12:05 ` Popuri, Sriram
2018-05-26 12:21 ` Christoph Hellwig
2018-05-26 13:02 ` Knight, Frederick
2018-05-28 6:59 ` Johannes Thumshirn
2018-06-04 19:59 ` Keith Busch
2018-06-05 4:47 ` Christoph Hellwig
2018-06-05 14:37 ` Keith Busch
2018-05-26 10:27 ` [PATCH 14/14] nvme: limit warnings from nvme_identify_ns Christoph Hellwig
2018-05-28 7:00 ` Johannes Thumshirn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180526102735.31404-8-hch@lst.de \
--to=hch@lst.de \
--cc=axboe@kernel.dk \
--cc=hare@suse.de \
--cc=keith.busch@intel.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=sagi@grimberg.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).