From: Bart Van Assche <bart.vanassche@wdc.com>
To: Omar Sandoval <osandov@fb.com>
Cc: linux-block@vger.kernel.org, Bart Van Assche <bart.vanassche@wdc.com>
Subject: [PATCH blktests v2 0/3] Add SRP initiator driver tests
Date: Wed, 27 Jun 2018 14:49:05 -0700 [thread overview]
Message-ID: <20180627214908.26379-1-bart.vanassche@wdc.com> (raw)
Hello Omar,
As promised during LSF/MM, I have converted the srp-tests software to the
blktests framework. Please consider this patch series for inclusion in the
official blktests repository. Note: this patch series is also available as
a github pull request, namely https://github.com/osandov/blktests/pull/24.
Thanks,
Bart.
Changes compared to v1:
- Left out the patches from version one of this series that are already
upstream.
- Renamed tests/srp/group into tests/srp/rc.
- The SRP tests do not start if LIO was already configured (reported by Ming).
- Documented the SRP test requirements in README.md.
Bart Van Assche (3):
src/Makefile: Rename $(TARGETS) into $(C_TARGETS)
Add the discontiguous-io test program
Add tests for the SRP initiator and target drivers
README.md | 71 +++
src/.gitignore | 1 +
src/Makefile | 17 +-
src/discontiguous-io.cpp | 340 ++++++++++
tests/srp/001 | 71 +++
tests/srp/001.out | 8 +
tests/srp/002 | 49 ++
tests/srp/002.out | 7 +
tests/srp/003 | 50 ++
tests/srp/003.out | 7 +
tests/srp/004 | 50 ++
tests/srp/004.out | 7 +
tests/srp/005 | 40 ++
tests/srp/005.out | 7 +
tests/srp/006 | 40 ++
tests/srp/006.out | 7 +
tests/srp/007 | 40 ++
tests/srp/007.out | 7 +
tests/srp/008 | 39 ++
tests/srp/008.out | 7 +
tests/srp/009 | 40 ++
tests/srp/009.out | 7 +
tests/srp/010 | 40 ++
tests/srp/010.out | 7 +
tests/srp/011 | 44 ++
tests/srp/011.out | 7 +
tests/srp/012 | 52 ++
tests/srp/012.out | 8 +
tests/srp/013 | 48 ++
tests/srp/013.out | 8 +
tests/srp/functions | 1288 ++++++++++++++++++++++++++++++++++++++
tests/srp/rc | 54 ++
32 files changed, 2464 insertions(+), 4 deletions(-)
create mode 100644 src/discontiguous-io.cpp
create mode 100755 tests/srp/001
create mode 100644 tests/srp/001.out
create mode 100755 tests/srp/002
create mode 100644 tests/srp/002.out
create mode 100755 tests/srp/003
create mode 100644 tests/srp/003.out
create mode 100755 tests/srp/004
create mode 100644 tests/srp/004.out
create mode 100755 tests/srp/005
create mode 100644 tests/srp/005.out
create mode 100755 tests/srp/006
create mode 100644 tests/srp/006.out
create mode 100755 tests/srp/007
create mode 100644 tests/srp/007.out
create mode 100755 tests/srp/008
create mode 100644 tests/srp/008.out
create mode 100755 tests/srp/009
create mode 100644 tests/srp/009.out
create mode 100755 tests/srp/010
create mode 100644 tests/srp/010.out
create mode 100755 tests/srp/011
create mode 100644 tests/srp/011.out
create mode 100755 tests/srp/012
create mode 100644 tests/srp/012.out
create mode 100755 tests/srp/013
create mode 100644 tests/srp/013.out
create mode 100755 tests/srp/functions
create mode 100755 tests/srp/rc
--
2.17.1
next reply other threads:[~2018-06-27 21:49 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-27 21:49 Bart Van Assche [this message]
2018-06-27 21:49 ` [PATCH blktests v2 1/3] src/Makefile: Rename $(TARGETS) into $(C_TARGETS) Bart Van Assche
2018-06-28 6:41 ` Johannes Thumshirn
2018-06-27 21:49 ` [PATCH blktests v2 2/3] Add the discontiguous-io test program Bart Van Assche
2018-06-28 6:42 ` Johannes Thumshirn
2018-06-27 21:49 ` [PATCH blktests v2 3/3] Add tests for the SRP initiator and target drivers Bart Van Assche
2018-06-28 23:43 ` Omar Sandoval
2018-06-29 16:13 ` Bart Van Assche
2018-07-03 19:49 ` Omar Sandoval
2018-07-03 19:50 ` Omar Sandoval
2018-07-03 21:39 ` Omar Sandoval
2018-07-04 5:59 ` Hannes Reinecke
2018-07-04 16:24 ` Bart Van Assche
2018-07-06 21:21 ` Omar Sandoval
2018-07-06 23:03 ` Omar Sandoval
2018-07-06 23:07 ` Bart Van Assche
2018-07-06 23:10 ` Omar Sandoval
2018-07-06 23:15 ` Omar Sandoval
2018-07-09 6:06 ` Hannes Reinecke
2018-07-09 22:57 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180627214908.26379-1-bart.vanassche@wdc.com \
--to=bart.vanassche@wdc.com \
--cc=linux-block@vger.kernel.org \
--cc=osandov@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox