From: Omar Sandoval <osandov@osandov.com>
To: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: linux-block@vger.kernel.org, linux-nvme@lists.infradead.org
Subject: Re: [PATCH 5/5 blktests] nvme: make new testcases backward compatible
Date: Tue, 11 Feb 2020 14:06:07 -0800 [thread overview]
Message-ID: <20200211220607.GF100751@vader> (raw)
In-Reply-To: <20200129232921.11771-6-chaitanya.kulkarni@wdc.com>
On Wed, Jan 29, 2020 at 03:29:21PM -0800, Chaitanya Kulkarni wrote:
> This patch makes newly added testcases backward compatible with
> right value setting into the SKIP_REASON variable.
Oh! These should be part of the new tests from the start. Please
reorganize the series.
> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
> ---
> tests/nvme/033 | 60 +++++++++++++++++++++++++++-----------------------
> tests/nvme/034 | 59 ++++++++++++++++++++++++++-----------------------
> tests/nvme/rc | 27 +++++++++++++++++------
> 3 files changed, 83 insertions(+), 63 deletions(-)
>
> diff --git a/tests/nvme/033 b/tests/nvme/033
> index 97eba7f..db5ded3 100755
> --- a/tests/nvme/033
> +++ b/tests/nvme/033
> @@ -9,49 +9,53 @@
> DESCRIPTION="Test NVMeOF target cntlid[min|max] attributes"
> QUICK=1
>
> +PORT=""
> +NVMEDEV=""
> +LOOP_DEV=""
> +FILE_PATH="$TMPDIR/img"
> +SUBSYS_NAME="blktests-subsystem-1"
> +
> +_have_cid_min_max()
> +{
> + local cid_min=14
> + local cid_max=15
> +
> + _setup_nvmet
> + truncate -s 1G "${FILE_PATH}"
> + LOOP_DEV="$(losetup -f --show "${FILE_PATH}")"
> +
> + # we can only know skip reason when we create a subsys
> + _create_nvmet_subsystem "${SUBSYS_NAME}" "${LOOP_DEV}" \
> + "91fdba0d-f87b-4c25-b80f-db7be1418b9e" ${cid_min} ${cid_max}
> +}
> +
> requires() {
> _have_program nvme && _have_modules loop nvme-loop nvmet && \
> - _have_configfs
> + _have_configfs && _have_cid_min_max
> }
>
> test() {
> echo "Running ${TEST_NAME}"
>
> - _setup_nvmet
> -
> - local port
> - local nvmedev
> - local loop_dev
> - local cid_min=14
> - local cid_max=15
> - local file_path="$TMPDIR/img"
> - local subsys_name="blktests-subsystem-1"
> -
> - truncate -s 1G "${file_path}"
> -
> - loop_dev="$(losetup -f --show "${file_path}")"
> -
> - _create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
> - "91fdba0d-f87b-4c25-b80f-db7be1418b9e" ${cid_min} ${cid_max}
> - port="$(_create_nvmet_port "loop")"
> - _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
> + PORT="$(_create_nvmet_port "loop")"
> + _add_nvmet_subsys_to_port "${PORT}" "${SUBSYS_NAME}"
>
> - nvme connect -t loop -n "${subsys_name}"
> + nvme connect -t loop -n "${SUBSYS_NAME}"
>
> udevadm settle
>
> - nvmedev="$(_find_nvme_loop_dev)"
> - nvme id-ctrl /dev/${nvmedev}n1 | grep cntlid | tr -s ' ' ' '
> + NVMEDEV="$(_find_nvme_loop_dev)"
> + nvme id-ctrl /dev/${NVMEDEV}n1 | grep cntlid | tr -s ' ' ' '
>
> - nvme disconnect -n "${subsys_name}"
> + nvme disconnect -n "${SUBSYS_NAME}"
>
> - _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
> - _remove_nvmet_subsystem "${subsys_name}"
> - _remove_nvmet_port "${port}"
> + _remove_nvmet_subsystem_from_port "${PORT}" "${SUBSYS_NAME}"
> + _remove_nvmet_subsystem "${SUBSYS_NAME}"
> + _remove_nvmet_port "${PORT}"
>
> - losetup -d "${loop_dev}"
> + losetup -d "${LOOP_DEV}"
>
> - rm "${file_path}"
> + rm "${FILE_PATH}"
>
> echo "Test complete"
> }
> diff --git a/tests/nvme/034 b/tests/nvme/034
> index 1a55ff9..39d833f 100755
> --- a/tests/nvme/034
> +++ b/tests/nvme/034
> @@ -9,50 +9,53 @@
> DESCRIPTION="Test NVMeOF target model attribute"
> QUICK=1
>
> +PORT=""
> +NVMEDEV=""
> +LOOP_DEV=""
> +FILE_PATH="$TMPDIR/img"
> +SUBSYS_NAME="blktests-subsystem-1"
> +
> +_have_model()
> +{
> + local model="test~model"
> +
> + _setup_nvmet
> + truncate -s 1G "${FILE_PATH}"
> + LOOP_DEV="$(losetup -f --show "${FILE_PATH}")"
> +
> + # we can only know skip reason when we create a subsys
> + _create_nvmet_subsystem "${SUBSYS_NAME}" "${LOOP_DEV}" \
> + "91fdba0d-f87b-4c25-b80f-db7be1418b9e" 14 15 \
> + ${model}
> +}
> requires() {
> _have_program nvme && _have_modules loop nvme-loop nvmet && \
> - _have_configfs
> + _have_configfs && _have_model
> }
>
> test() {
> echo "Running ${TEST_NAME}"
>
> - _setup_nvmet
> -
> - local port
> - local result
> - local nvmedev
> - local loop_dev
> - local model="test~model"
> - local file_path="$TMPDIR/img"
> - local subsys_name="blktests-subsystem-1"
> -
> - truncate -s 1G "${file_path}"
> -
> - loop_dev="$(losetup -f --show "${file_path}")"
> -
> - _create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
> - "91fdba0d-f87b-4c25-b80f-db7be1418b9e" 0 100 ${model}
> - port="$(_create_nvmet_port "loop")"
> - _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
> + PORT="$(_create_nvmet_port "loop")"
> + _add_nvmet_subsys_to_port "${PORT}" "${SUBSYS_NAME}"
>
> - nvme connect -t loop -n "${subsys_name}"
> + nvme connect -t loop -n "${SUBSYS_NAME}"
>
> udevadm settle
>
> - nvmedev="$(_find_nvme_loop_dev)"
> - nvme list | grep ${nvmedev}n1 | grep -q test~model
> + NVMEDEV="$(_find_nvme_loop_dev)"
> + nvme list | grep ${NVMEDEV}n1 | grep -q test~model
> result=$?
>
> - nvme disconnect -n "${subsys_name}"
> + nvme disconnect -n "${SUBSYS_NAME}"
>
> - _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
> - _remove_nvmet_subsystem "${subsys_name}"
> - _remove_nvmet_port "${port}"
> + _remove_nvmet_subsystem_from_port "${PORT}" "${SUBSYS_NAME}"
> + _remove_nvmet_subsystem "${SUBSYS_NAME}"
> + _remove_nvmet_port "${PORT}"
>
> - losetup -d "${loop_dev}"
> + losetup -d "${LOOP_DEV}"
>
> - rm "${file_path}"
> + rm "${FILE_PATH}"
>
> if [ ${result} -eq 0 ]; then
> echo "Test complete"
> diff --git a/tests/nvme/rc b/tests/nvme/rc
> index 377c7f7..77bafd8 100644
> --- a/tests/nvme/rc
> +++ b/tests/nvme/rc
> @@ -128,15 +128,28 @@ _create_nvmet_subsystem() {
>
> mkdir -p "${cfs_path}"
> echo 1 > "${cfs_path}/attr_allow_any_host"
> - _create_nvmet_ns "${nvmet_subsystem}" "1" "${blkdev}" "${uuid}"
> -
> - if [ $# -eq 5 ] && [ -f ${cfs_path}/attr_cntlid_min ]; then
> - echo ${cntlid_min} > ${cfs_path}/attr_cntlid_min
> - echo ${cntlid_max} > ${cfs_path}/attr_cntlid_max
> + if [ $# -eq 5 ]; then
> + if [ -f ${cfs_path}/attr_cntlid_min ]; then
> + echo ${cntlid_min} > ${cfs_path}/attr_cntlid_min
> + echo ${cntlid_max} > ${cfs_path}/attr_cntlid_max
> + else
> + SKIP_REASON="attr_cntlid_[min|max] not found"
> + rmdir "${cfs_path}"
> + return 1
> + fi
> fi
> - if [ $# -eq 6 ] && [ -f ${cfs_path}/attr_model ]; then
> - echo ${model} > ${cfs_path}/attr_model
> + if [ $# -eq 6 ]; then
> + if [ -f ${cfs_path}/attr_model ]; then
> + echo ${model} > ${cfs_path}/attr_model
> + else
> + SKIP_REASON="attr_cntlid_model not found"
> + rmdir "${cfs_path}"
> + return 1
> + fi
> fi
> + _create_nvmet_ns "${nvmet_subsystem}" "1" "${blkdev}" "${uuid}"
> +
> + return 0
> }
>
> _remove_nvmet_ns() {
> --
> 2.22.1
>
next prev parent reply other threads:[~2020-02-11 22:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-29 23:29 [PATCH 0/5 blktest] nvme: add cntlid and model testcases Chaitanya Kulkarni
2020-01-29 23:29 ` [PATCH 1/5 blktests] nvme: allow target subsys set cntlid min/max Chaitanya Kulkarni
2020-02-11 21:50 ` Omar Sandoval
2020-01-29 23:29 ` [PATCH 2/5 blktests] nvme: test target cntlid min cntlid max Chaitanya Kulkarni
2020-02-11 21:58 ` Omar Sandoval
2020-01-29 23:29 ` [PATCH 3/5 blktests] nvme: allow target subsys set model Chaitanya Kulkarni
2020-02-11 22:00 ` Omar Sandoval
2020-02-14 0:58 ` Chaitanya Kulkarni
2020-02-14 1:11 ` Chaitanya Kulkarni
2020-01-29 23:29 ` [PATCH 4/5 blktests] nvme: test target model attribute Chaitanya Kulkarni
2020-02-11 22:04 ` Omar Sandoval
2020-01-29 23:29 ` [PATCH 5/5 blktests] nvme: make new testcases backward compatible Chaitanya Kulkarni
2020-02-11 22:06 ` Omar Sandoval [this message]
2020-02-11 22:18 ` Chaitanya Kulkarni
2020-02-03 22:48 ` [PATCH 0/5 blktest] nvme: add cntlid and model testcases Chaitanya Kulkarni
2020-02-11 16:46 ` Chaitanya Kulkarni
2020-02-11 22:07 ` Omar Sandoval
2020-02-11 22:17 ` Chaitanya Kulkarni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200211220607.GF100751@vader \
--to=osandov@osandov.com \
--cc=chaitanya.kulkarni@wdc.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).