[PATCH AUTOSEL 5.5 10/56] null_blk: Fix the null_add_dev() error path

[PATCH AUTOSEL 5.5 10/56] null_blk: Fix the null_add_dev() error path

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 2004bfdef945fe55196db6b9cdf321fbc75bb0de ]

If null_add_dev() fails, clear dev->nullb.

This patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
Read of size 8 at addr ffff88803280fc30 by task check/8409

Call Trace:
 dump_stack+0xa5/0xe6
 print_address_description.constprop.0+0x26/0x260
 __kasan_report.cold+0x7b/0x99
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff370926317
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff2dd2da48 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007ff370926317
RDX: 0000000000000002 RSI: 0000559437ef23f0 RDI: 0000000000000001
RBP: 0000559437ef23f0 R08: 000000000000000a R09: 0000000000000001
R10: 0000559436703471 R11: 0000000000000246 R12: 0000000000000002
R13: 00007ff370a006a0 R14: 00007ff370a014a0 R15: 00007ff370a008a0

Allocated by task 8409:
 save_stack+0x23/0x90
 __kasan_kmalloc.constprop.0+0xcf/0xe0
 kasan_kmalloc+0xd/0x10
 kmem_cache_alloc_node_trace+0x129/0x4c0
 null_add_dev+0x24a/0xe90 [null_blk]
 nullb_device_power_store+0x1b6/0x270 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 8409:
 save_stack+0x23/0x90
 __kasan_slab_free+0x112/0x160
 kasan_slab_free+0x12/0x20
 kfree+0xdf/0x250
 null_add_dev+0xaf3/0xe90 [null_blk]
 nullb_device_power_store+0x1b6/0x270 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 2984c8684f96 ("nullb: factor disk parameters")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index ae8d4bc532b0b..97bb53d7fa348 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -1790,6 +1790,7 @@ static int null_add_dev(struct nullb_device *dev)
 	cleanup_queues(nullb);
 out_free_nullb:
 	kfree(nullb);
+	dev->nullb = NULL;
 out:
 	return rv;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.5 11/56] blk-mq: Fix a recently introduced regression in blk_mq_realloc_hw_ctxs()

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit d0930bb8f46b8fb4a7d429c0bf1c91b3ed00a7cf ]

q->nr_hw_queues must only be updated once it is known that
blk_mq_realloc_hw_ctxs() has succeeded. Otherwise it can happen that
reallocation fails and that q->nr_hw_queues is larger than the number of
allocated hardware queues. This patch fixes the following crash if
increasing the number of hardware queues fails:

BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x775/0x810
Write of size 8 at addr 0000000000000118 by task check/977

CPU: 3 PID: 977 Comm: check Not tainted 5.6.0-rc1-dbg+ #8
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0xa5/0xe6
 __kasan_report.cold+0x65/0x99
 kasan_report+0x16/0x20
 check_memory_region+0x140/0x1b0
 memset+0x28/0x40
 blk_mq_map_swqueue+0x775/0x810
 blk_mq_update_nr_hw_queues+0x468/0x710
 nullb_device_submit_queues_store+0xf7/0x1a0 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: ac0d6b926e74 ("block: Reduce the amount of memory required per request queue")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 329df7986bf60..51ff4852d34bc 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2766,7 +2766,6 @@ static void blk_mq_realloc_hw_ctxs(struct blk_mq_tag_set *set,
 			memcpy(new_hctxs, hctxs, q->nr_hw_queues *
 			       sizeof(*hctxs));
 		q->queue_hw_ctx = new_hctxs;
-		q->nr_hw_queues = set->nr_hw_queues;
 		kfree(hctxs);
 		hctxs = new_hctxs;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.5 12/56] null_blk: Handle null_add_dev() failures properly

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 9b03b713082a31a5b90e0a893c72aa620e255c26 ]

If null_add_dev() fails then null_del_dev() is called with a NULL argument.
Make null_del_dev() handle this scenario correctly. This patch fixes the
following KASAN complaint:

null-ptr-deref in null_del_dev+0x28/0x280 [null_blk]
Read of size 8 at addr 0000000000000000 by task find/1062

Call Trace:
 dump_stack+0xa5/0xe6
 __kasan_report.cold+0x65/0x99
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 null_del_dev+0x28/0x280 [null_blk]
 nullb_group_drop_item+0x7e/0xa0 [null_blk]
 client_drop_item+0x53/0x80 [configfs]
 configfs_rmdir+0x395/0x4e0 [configfs]
 vfs_rmdir+0xb6/0x220
 do_rmdir+0x238/0x2c0
 __x64_sys_unlinkat+0x75/0x90
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 97bb53d7fa348..635904bfcf777 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -1432,7 +1432,12 @@ static void cleanup_queues(struct nullb *nullb)
 
 static void null_del_dev(struct nullb *nullb)
 {
-	struct nullb_device *dev = nullb->dev;
+	struct nullb_device *dev;
+
+	if (!nullb)
+		return;
+
+	dev = nullb->dev;
 
 	ida_simple_remove(&nullb_indexes, nullb->index);
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 13/56] null_blk: fix spurious IO errors after failed past-wp access

[Sasha Levin]

From: Alexey Dobriyan <adobriyan@gmail.com>

[ Upstream commit ff77042296d0a54535ddf74412c5ae92cb4ec76a ]

Steps to reproduce:

	BLKRESETZONE zone 0

	// force EIO
	pwrite(fd, buf, 4096, 4096);

	[issue more IO including zone ioctls]

It will start failing randomly including IO to unrelated zones because of
->error "reuse". Trigger can be partition detection as well if test is not
run immediately which is even more entertaining.

The fix is of course to clear ->error where necessary.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 635904bfcf777..0cafad09c9b29 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -605,6 +605,7 @@ static struct nullb_cmd *__alloc_cmd(struct nullb_queue *nq)
 	if (tag != -1U) {
 		cmd = &nq->cmds[tag];
 		cmd->tag = tag;
+		cmd->error = BLK_STS_OK;
 		cmd->nq = nq;
 		if (nq->dev->irqmode == NULL_IRQ_TIMER) {
 			hrtimer_init(&cmd->timer, CLOCK_MONOTONIC,
@@ -1385,6 +1386,7 @@ static blk_status_t null_queue_rq(struct blk_mq_hw_ctx *hctx,
 		cmd->timer.function = null_cmd_timer_expired;
 	}
 	cmd->rq = bd->rq;
+	cmd->error = BLK_STS_OK;
 	cmd->nq = nq;
 
 	blk_mq_start_request(bd->rq);
-- 
2.20.1

[PATCH AUTOSEL 5.5 20/56] block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices

[Sasha Levin]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit e74d93e96d721c4297f2a900ad0191890d2fc2b0 ]

Field bdi->io_pages added in commit 9491ae4aade6 ("mm: don't cap request
size based on read-ahead setting") removes unneeded split of read requests.

Stacked drivers do not call blk_queue_max_hw_sectors(). Instead they set
limits of their devices by blk_set_stacking_limits() + disk_stack_limits().
Field bio->io_pages stays zero until user set max_sectors_kb via sysfs.

This patch updates io_pages after merging limits in disk_stack_limits().

Commit c6d6e9b0f6b4 ("dm: do not allow readahead to limit IO size") fixed
the same problem for device-mapper devices, this one fixes MD RAIDs.

Fixes: 9491ae4aade6 ("mm: don't cap request size based on read-ahead setting")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-settings.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/block/blk-settings.c b/block/blk-settings.c
index c8eda2e7b91e4..be1dca0103a45 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -664,6 +664,9 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
 		printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
 		       top, bottom);
 	}
+
+	t->backing_dev_info->io_pages =
+		t->limits.max_sectors >> (PAGE_SHIFT - 9);
 }
 EXPORT_SYMBOL(disk_stack_limits);
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 30/56] block, bfq: move forward the getting of an extra ref in bfq_bfqq_move

[Sasha Levin]

From: Paolo Valente <paolo.valente@linaro.org>

[ Upstream commit fd1bb3ae54a9a2e0c42709de861c69aa146b8955 ]

Commit ecedd3d7e199 ("block, bfq: get extra ref to prevent a queue
from being freed during a group move") gets an extra reference to a
bfq_queue before possibly deactivating it (temporarily), in
bfq_bfqq_move(). This prevents the bfq_queue from disappearing before
being reactivated in its new group.

Yet, the bfq_queue may also be expired (i.e., its service may be
stopped) before the bfq_queue is deactivated. And also an expiration
may lead to a premature freeing. This commit fixes this issue by
simply moving forward the getting of the extra reference already
introduced by commit ecedd3d7e199 ("block, bfq: get extra ref to
prevent a queue from being freed during a group move").

Reported-by: cki-project@redhat.com
Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bfq-cgroup.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/block/bfq-cgroup.c b/block/bfq-cgroup.c
index 5a64607ce7744..a6d42339fb342 100644
--- a/block/bfq-cgroup.c
+++ b/block/bfq-cgroup.c
@@ -641,6 +641,12 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 {
 	struct bfq_entity *entity = &bfqq->entity;
 
+	/*
+	 * Get extra reference to prevent bfqq from being freed in
+	 * next possible expire or deactivate.
+	 */
+	bfqq->ref++;
+
 	/* If bfqq is empty, then bfq_bfqq_expire also invokes
 	 * bfq_del_bfqq_busy, thereby removing bfqq and its entity
 	 * from data structures related to current group. Otherwise we
@@ -651,12 +657,6 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 		bfq_bfqq_expire(bfqd, bfqd->in_service_queue,
 				false, BFQQE_PREEMPTED);
 
-	/*
-	 * get extra reference to prevent bfqq from being freed in
-	 * next possible deactivate
-	 */
-	bfqq->ref++;
-
 	if (bfq_bfqq_busy(bfqq))
 		bfq_deactivate_bfqq(bfqd, bfqq, false, false);
 	else if (entity->on_st)
@@ -676,7 +676,7 @@ void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 
 	if (!bfqd->in_service_queue && !bfqd->rq_in_driver)
 		bfq_schedule_dispatch(bfqd);
-	/* release extra ref taken above */
+	/* release extra ref taken above, bfqq may happen to be freed now */
 	bfq_put_queue(bfqq);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 40/56] blk-mq: Keep set->nr_hw_queues and set->map[].nr_queues in sync

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 6e66b49392419f3fe134e1be583323ef75da1e4b ]

blk_mq_map_queues() and multiple .map_queues() implementations expect that
set->map[HCTX_TYPE_DEFAULT].nr_queues is set to the number of hardware
queues. Hence set .nr_queues before calling these functions. This patch
fixes the following kernel warning:

WARNING: CPU: 0 PID: 2501 at include/linux/cpumask.h:137
Call Trace:
 blk_mq_run_hw_queue+0x19d/0x350 block/blk-mq.c:1508
 blk_mq_run_hw_queues+0x112/0x1a0 block/blk-mq.c:1525
 blk_mq_requeue_work+0x502/0x780 block/blk-mq.c:775
 process_one_work+0x9af/0x1740 kernel/workqueue.c:2269
 worker_thread+0x98/0xe40 kernel/workqueue.c:2415
 kthread+0x361/0x430 kernel/kthread.c:255

Fixes: ed76e329d74a ("blk-mq: abstract out queue map") # v5.0
Reported-by: syzbot+d44e1b26ce5c3e77458d@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index 51ff4852d34bc..8391e8e2a5044 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2964,6 +2964,14 @@ static int blk_mq_alloc_rq_maps(struct blk_mq_tag_set *set)
 
 static int blk_mq_update_queue_map(struct blk_mq_tag_set *set)
 {
+	/*
+	 * blk_mq_map_queues() and multiple .map_queues() implementations
+	 * expect that set->map[HCTX_TYPE_DEFAULT].nr_queues is set to the
+	 * number of hardware queues.
+	 */
+	if (set->nr_maps == 1)
+		set->map[HCTX_TYPE_DEFAULT].nr_queues = set->nr_hw_queues;
+
 	if (set->ops->map_queues && !is_kdump_kernel()) {
 		int i;
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 41/56] block: Fix use-after-free issue accessing struct io_cq

[Sasha Levin]

From: Sahitya Tummala <stummala@codeaurora.org>

[ Upstream commit 30a2da7b7e225ef6c87a660419ea04d3cef3f6a7 ]

There is a potential race between ioc_release_fn() and
ioc_clear_queue() as shown below, due to which below kernel
crash is observed. It also can result into use-after-free
issue.

context#1:				context#2:
ioc_release_fn()			__ioc_clear_queue() gets the same icq
->spin_lock(&ioc->lock);		->spin_lock(&ioc->lock);
->ioc_destroy_icq(icq);
  ->list_del_init(&icq->q_node);
  ->call_rcu(&icq->__rcu_head,
  	icq_free_icq_rcu);
->spin_unlock(&ioc->lock);
					->ioc_destroy_icq(icq);
					  ->hlist_del_init(&icq->ioc_node);
					  This results into below crash as this memory
					  is now used by icq->__rcu_head in context#1.
					  There is a chance that icq could be free'd
					  as well.

22150.386550:   <6> Unable to handle kernel write to read-only memory
at virtual address ffffffaa8d31ca50
...
Call trace:
22150.607350:   <2>  ioc_destroy_icq+0x44/0x110
22150.611202:   <2>  ioc_clear_queue+0xac/0x148
22150.615056:   <2>  blk_cleanup_queue+0x11c/0x1a0
22150.619174:   <2>  __scsi_remove_device+0xdc/0x128
22150.623465:   <2>  scsi_forget_host+0x2c/0x78
22150.627315:   <2>  scsi_remove_host+0x7c/0x2a0
22150.631257:   <2>  usb_stor_disconnect+0x74/0xc8
22150.635371:   <2>  usb_unbind_interface+0xc8/0x278
22150.639665:   <2>  device_release_driver_internal+0x198/0x250
22150.644897:   <2>  device_release_driver+0x24/0x30
22150.649176:   <2>  bus_remove_device+0xec/0x140
22150.653204:   <2>  device_del+0x270/0x460
22150.656712:   <2>  usb_disable_device+0x120/0x390
22150.660918:   <2>  usb_disconnect+0xf4/0x2e0
22150.664684:   <2>  hub_event+0xd70/0x17e8
22150.668197:   <2>  process_one_work+0x210/0x480
22150.672222:   <2>  worker_thread+0x32c/0x4c8

Fix this by adding a new ICQ_DESTROYED flag in ioc_destroy_icq() to
indicate this icq is once marked as destroyed. Also, ensure
__ioc_clear_queue() is accessing icq within rcu_read_lock/unlock so
that icq doesn't get free'd up while it is still using it.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Co-developed-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-ioc.c           | 7 +++++++
 include/linux/iocontext.h | 1 +
 2 files changed, 8 insertions(+)

diff --git a/block/blk-ioc.c b/block/blk-ioc.c
index 5ed59ac6ae58b..9df50fb507caf 100644
--- a/block/blk-ioc.c
+++ b/block/blk-ioc.c
@@ -84,6 +84,7 @@ static void ioc_destroy_icq(struct io_cq *icq)
 	 * making it impossible to determine icq_cache.  Record it in @icq.
 	 */
 	icq->__rcu_icq_cache = et->icq_cache;
+	icq->flags |= ICQ_DESTROYED;
 	call_rcu(&icq->__rcu_head, icq_free_icq_rcu);
 }
 
@@ -212,15 +213,21 @@ static void __ioc_clear_queue(struct list_head *icq_list)
 {
 	unsigned long flags;
 
+	rcu_read_lock();
 	while (!list_empty(icq_list)) {
 		struct io_cq *icq = list_entry(icq_list->next,
 						struct io_cq, q_node);
 		struct io_context *ioc = icq->ioc;
 
 		spin_lock_irqsave(&ioc->lock, flags);
+		if (icq->flags & ICQ_DESTROYED) {
+			spin_unlock_irqrestore(&ioc->lock, flags);
+			continue;
+		}
 		ioc_destroy_icq(icq);
 		spin_unlock_irqrestore(&ioc->lock, flags);
 	}
+	rcu_read_unlock();
 }
 
 /**
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index dba15ca8e60bc..1dcd9198beb7f 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -8,6 +8,7 @@
 
 enum {
 	ICQ_EXITED		= 1 << 2,
+	ICQ_DESTROYED		= 1 << 3,
 };
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 5.5 42/56] block, zoned: fix integer overflow with BLKRESETZONE et al

[Sasha Levin]

From: Alexey Dobriyan <adobriyan@gmail.com>

[ Upstream commit 11bde986002c0af67eb92d73321d06baefae7128 ]

Check for overflow in addition before checking for end-of-block-device.

Steps to reproduce:

	#define _GNU_SOURCE 1
	#include <sys/ioctl.h>
	#include <sys/types.h>
	#include <sys/stat.h>
	#include <fcntl.h>

	typedef unsigned long long __u64;

	struct blk_zone_range {
	        __u64 sector;
	        __u64 nr_sectors;
	};

	#define BLKRESETZONE    _IOW(0x12, 131, struct blk_zone_range)

	int main(void)
	{
	        int fd = open("/dev/nullb0", O_RDWR|O_DIRECT);
	        struct blk_zone_range zr = {4096, 0xfffffffffffff000ULL};
	        ioctl(fd, BLKRESETZONE, &zr);
	        return 0;
	}

BUG: KASAN: null-ptr-deref in submit_bio_wait+0x74/0xe0
Write of size 8 at addr 0000000000000040 by task a.out/1590

CPU: 8 PID: 1590 Comm: a.out Not tainted 5.6.0-rc1-00019-g359c92c02bfa #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014
Call Trace:
 dump_stack+0x76/0xa0
 __kasan_report.cold+0x5/0x3e
 kasan_report+0xe/0x20
 submit_bio_wait+0x74/0xe0
 blkdev_zone_mgmt+0x26f/0x2a0
 blkdev_zone_mgmt_ioctl+0x14b/0x1b0
 blkdev_ioctl+0xb28/0xe60
 block_ioctl+0x69/0x80
 ksys_ioctl+0x3af/0xa50

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-zoned.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index d00fcfd71dfea..eb27e80e9075c 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -173,7 +173,7 @@ int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op,
 	if (!op_is_zone_mgmt(op))
 		return -EOPNOTSUPP;
 
-	if (!nr_sectors || end_sector > capacity)
+	if (end_sector <= sector || end_sector > capacity)
 		/* Out of range */
 		return -EINVAL;
 
-- 
2.20.1

[PATCH AUTOSEL 5.5 51/56] block, bfq: fix use-after-free in bfq_idle_slice_timer_body

[Sasha Levin]

From: Zhiqiang Liu <liuzhiqiang26@huawei.com>

[ Upstream commit 2f95fa5c955d0a9987ffdc3a095e2f4e62c5f2a9 ]

In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is
not in bfqd-lock critical section. The bfqq, which is not
equal to NULL in bfq_idle_slice_timer, may be freed after passing
to bfq_idle_slice_timer_body. So we will access the freed memory.

In addition, considering the bfqq may be in race, we should
firstly check whether bfqq is in service before doing something
on it in bfq_idle_slice_timer_body func. If the bfqq in race is
not in service, it means the bfqq has been expired through
__bfq_bfqq_expire func, and wait_request flags has been cleared in
__bfq_bfqd_reset_in_service func. So we do not need to re-clear the
wait_request of bfqq which is not in service.

KASAN log is given as follows:
[13058.354613] ==================================================================
[13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290
[13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767
[13058.354646]
[13058.354655] CPU: 96 PID: 19767 Comm: fork13
[13058.354661] Call trace:
[13058.354667]  dump_backtrace+0x0/0x310
[13058.354672]  show_stack+0x28/0x38
[13058.354681]  dump_stack+0xd8/0x108
[13058.354687]  print_address_description+0x68/0x2d0
[13058.354690]  kasan_report+0x124/0x2e0
[13058.354697]  __asan_load8+0x88/0xb0
[13058.354702]  bfq_idle_slice_timer+0xac/0x290
[13058.354707]  __hrtimer_run_queues+0x298/0x8b8
[13058.354710]  hrtimer_interrupt+0x1b8/0x678
[13058.354716]  arch_timer_handler_phys+0x4c/0x78
[13058.354722]  handle_percpu_devid_irq+0xf0/0x558
[13058.354731]  generic_handle_irq+0x50/0x70
[13058.354735]  __handle_domain_irq+0x94/0x110
[13058.354739]  gic_handle_irq+0x8c/0x1b0
[13058.354742]  el1_irq+0xb8/0x140
[13058.354748]  do_wp_page+0x260/0xe28
[13058.354752]  __handle_mm_fault+0x8ec/0x9b0
[13058.354756]  handle_mm_fault+0x280/0x460
[13058.354762]  do_page_fault+0x3ec/0x890
[13058.354765]  do_mem_abort+0xc0/0x1b0
[13058.354768]  el0_da+0x24/0x28
[13058.354770]
[13058.354773] Allocated by task 19731:
[13058.354780]  kasan_kmalloc+0xe0/0x190
[13058.354784]  kasan_slab_alloc+0x14/0x20
[13058.354788]  kmem_cache_alloc_node+0x130/0x440
[13058.354793]  bfq_get_queue+0x138/0x858
[13058.354797]  bfq_get_bfqq_handle_split+0xd4/0x328
[13058.354801]  bfq_init_rq+0x1f4/0x1180
[13058.354806]  bfq_insert_requests+0x264/0x1c98
[13058.354811]  blk_mq_sched_insert_requests+0x1c4/0x488
[13058.354818]  blk_mq_flush_plug_list+0x2d4/0x6e0
[13058.354826]  blk_flush_plug_list+0x230/0x548
[13058.354830]  blk_finish_plug+0x60/0x80
[13058.354838]  read_pages+0xec/0x2c0
[13058.354842]  __do_page_cache_readahead+0x374/0x438
[13058.354846]  ondemand_readahead+0x24c/0x6b0
[13058.354851]  page_cache_sync_readahead+0x17c/0x2f8
[13058.354858]  generic_file_buffered_read+0x588/0xc58
[13058.354862]  generic_file_read_iter+0x1b4/0x278
[13058.354965]  ext4_file_read_iter+0xa8/0x1d8 [ext4]
[13058.354972]  __vfs_read+0x238/0x320
[13058.354976]  vfs_read+0xbc/0x1c0
[13058.354980]  ksys_read+0xdc/0x1b8
[13058.354984]  __arm64_sys_read+0x50/0x60
[13058.354990]  el0_svc_common+0xb4/0x1d8
[13058.354994]  el0_svc_handler+0x50/0xa8
[13058.354998]  el0_svc+0x8/0xc
[13058.354999]
[13058.355001] Freed by task 19731:
[13058.355007]  __kasan_slab_free+0x120/0x228
[13058.355010]  kasan_slab_free+0x10/0x18
[13058.355014]  kmem_cache_free+0x288/0x3f0
[13058.355018]  bfq_put_queue+0x134/0x208
[13058.355022]  bfq_exit_icq_bfqq+0x164/0x348
[13058.355026]  bfq_exit_icq+0x28/0x40
[13058.355030]  ioc_exit_icq+0xa0/0x150
[13058.355035]  put_io_context_active+0x250/0x438
[13058.355038]  exit_io_context+0xd0/0x138
[13058.355045]  do_exit+0x734/0xc58
[13058.355050]  do_group_exit+0x78/0x220
[13058.355054]  __wake_up_parent+0x0/0x50
[13058.355058]  el0_svc_common+0xb4/0x1d8
[13058.355062]  el0_svc_handler+0x50/0xa8
[13058.355066]  el0_svc+0x8/0xc
[13058.355067]
[13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464
[13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040)
[13058.355077] The buggy address belongs to the page:
[13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0
[13058.366175] flags: 0x2ffffe0000008100(slab|head)
[13058.370781] raw: 2ffffe0000008100 ffff7e80b53b1408 ffffa02d730c1c90 ffff802db5c90780
[13058.370787] raw: ffffa02cf3e606f0 0000000000370023 00000001ffffffff 0000000000000000
[13058.370789] page dumped because: kasan: bad access detected
[13058.370791]
[13058.370792] Memory state around the buggy address:
[13058.370797]  ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb
[13058.370801]  ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370808]                                                                 ^
[13058.370811]  ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370815]  ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[13058.370817] ==================================================================
[13058.370820] Disabling lock debugging due to kernel taint

Here, we directly pass the bfqd to bfq_idle_slice_timer_body func.
--
V2->V3: rewrite the comment as suggested by Paolo Valente
V1->V2: add one comment, and add Fixes and Reported-by tag.

Fixes: aee69d78d ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reported-by: Wang Wang <wangwang2@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Feilong Lin <linfeilong@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bfq-iosched.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 8fe4b69195119..43fbe5d096e3c 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -6214,20 +6214,28 @@ static struct bfq_queue *bfq_init_rq(struct request *rq)
 	return bfqq;
 }
 
-static void bfq_idle_slice_timer_body(struct bfq_queue *bfqq)
+static void
+bfq_idle_slice_timer_body(struct bfq_data *bfqd, struct bfq_queue *bfqq)
 {
-	struct bfq_data *bfqd = bfqq->bfqd;
 	enum bfqq_expiration reason;
 	unsigned long flags;
 
 	spin_lock_irqsave(&bfqd->lock, flags);
-	bfq_clear_bfqq_wait_request(bfqq);
 
+	/*
+	 * Considering that bfqq may be in race, we should firstly check
+	 * whether bfqq is in service before doing something on it. If
+	 * the bfqq in race is not in service, it has already been expired
+	 * through __bfq_bfqq_expire func and its wait_request flags has
+	 * been cleared in __bfq_bfqd_reset_in_service func.
+	 */
 	if (bfqq != bfqd->in_service_queue) {
 		spin_unlock_irqrestore(&bfqd->lock, flags);
 		return;
 	}
 
+	bfq_clear_bfqq_wait_request(bfqq);
+
 	if (bfq_bfqq_budget_timeout(bfqq))
 		/*
 		 * Also here the queue can be safely expired
@@ -6272,7 +6280,7 @@ static enum hrtimer_restart bfq_idle_slice_timer(struct hrtimer *timer)
 	 * early.
 	 */
 	if (bfqq)
-		bfq_idle_slice_timer_body(bfqq);
+		bfq_idle_slice_timer_body(bfqd, bfqq);
 
 	return HRTIMER_NORESTART;
 }
-- 
2.20.1