[PATCH] ata: Fix several kernel-doc headers

[Bart Van Assche <bvanassche@acm.org>]

Fix the kernel-doc warnings that are reported when building the ATA code
with W=1. This patch only modifies source code comments.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/ata/ata_generic.c      | 2 +-
 drivers/ata/libata-acpi.c      | 3 ++-
 drivers/ata/libata-pmp.c       | 2 +-
 drivers/ata/libata-sata.c      | 4 ++--
 drivers/ata/libata-transport.c | 6 +++---
 drivers/ata/pata_acpi.c        | 6 +++---
 drivers/ata/pata_marvell.c     | 2 +-
 7 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 9ff545ce8da3..77dd764e6936 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -151,7 +151,7 @@ static int is_intel_ider(struct pci_dev *dev)
 }
 
 /**
- *	ata_generic_init		-	attach generic IDE
+ *	ata_generic_init_one - attach generic IDE
  *	@dev: PCI device found
  *	@id: match entry
  *
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 224e3486e9a5..553bfdcfa311 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -476,7 +476,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
 }
 
 /**
- * ata_acpi_gtm_xfermode - determine xfermode from GTM parameter
+ * ata_acpi_gtm_xfermask - determine xfermode from GTM parameter
  * @dev: target device
  * @gtm: GTM parameter to use
  *
@@ -624,6 +624,7 @@ static int ata_acpi_filter_tf(struct ata_device *dev,
  * ata_acpi_run_tf - send taskfile registers to host controller
  * @dev: target ATA device
  * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
+ * @prev_gtf: previous taskfile register set
  *
  * Outputs ATA taskfile to standard ATA host controller.
  * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 79f2aeeb482a..ba7be3f38617 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -62,7 +62,7 @@ static unsigned int sata_pmp_read(struct ata_link *link, int reg, u32 *r_val)
  *	sata_pmp_write - write PMP register
  *	@link: link to write PMP register for
  *	@reg: register to write
- *	@r_val: value to write
+ *	@val: value to write
  *
  *	Write PMP register.
  *
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index c16423e44525..8adeab76dd38 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1067,7 +1067,7 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
 EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
 
 /**
- *	port_alloc - Allocate port for a SAS attached SATA device
+ *	ata_sas_port_alloc - Allocate port for a SAS attached SATA device
  *	@host: ATA host container for all SAS ports
  *	@port_info: Information from low-level host driver
  *	@shost: SCSI host that the scsi device is attached to
@@ -1127,7 +1127,7 @@ int ata_sas_port_start(struct ata_port *ap)
 EXPORT_SYMBOL_GPL(ata_sas_port_start);
 
 /**
- *	ata_port_stop - Undo ata_sas_port_start()
+ *	ata_sas_port_stop - Undo ata_sas_port_start()
  *	@ap: Port to shut down
  *
  *	May be used as the port_stop() entry in ata_port_operations.
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index 6a40e3c6cf49..26586b8adfb9 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -250,7 +250,7 @@ static int ata_tport_match(struct attribute_container *cont,
 
 /**
  * ata_tport_delete  --  remove ATA PORT
- * @port:	ATA PORT to remove
+ * @ap:	ATA PORT to remove
  *
  * Removes the specified ATA PORT.  Remove the associated link as well.
  */
@@ -376,7 +376,7 @@ static int ata_tlink_match(struct attribute_container *cont,
 
 /**
  * ata_tlink_delete  --  remove ATA LINK
- * @port:	ATA LINK to remove
+ * @link:	ATA LINK to remove
  *
  * Removes the specified ATA LINK.  remove associated ATA device(s) as well.
  */
@@ -632,7 +632,7 @@ static void ata_tdev_free(struct ata_device *dev)
 
 /**
  * ata_tdev_delete  --  remove ATA device
- * @port:	ATA PORT to remove
+ * @ata_dev:	ATA PORT to remove
  *
  * Removes the specified ATA device.
  */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index fa2bfc344a97..2014a974a59a 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -28,7 +28,7 @@ struct pata_acpi {
 
 /**
  *	pacpi_pre_reset	-	check for 40/80 pin
- *	@ap: Port
+ *	@link: Port
  *	@deadline: deadline jiffies for the operation
  *
  *	Perform the PATA port setup we need.
@@ -63,8 +63,8 @@ static int pacpi_cable_detect(struct ata_port *ap)
 
 /**
  *	pacpi_discover_modes	-	filter non ACPI modes
+ *	@ap: ATA interface
  *	@adev: ATA device
- *	@mask: proposed modes
  *
  *	Try the modes available and see which ones the ACPI method will
  *	set up sensibly. From this we get a mask of ACPI modes we can use
@@ -224,7 +224,7 @@ static struct ata_port_operations pacpi_ops = {
 /**
  *	pacpi_init_one - Register ACPI ATA PCI device with kernel services
  *	@pdev: PCI device to register
- *	@ent: Entry in pacpi_pci_tbl matching with @pdev
+ *	@id: PCI device ID
  *
  *	Called from kernel PCI layer.
  *
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index b066809ba9a1..602e5c2baa4b 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -110,7 +110,7 @@ static struct ata_port_operations marvell_ops = {
 /**
  *	marvell_init_one - Register Marvell ATA PCI device with kernel services
  *	@pdev: PCI device to register
- *	@ent: Entry in marvell_pci_tbl matching with @pdev
+ *	@id: Entry in marvell_pci_tbl matching with @pdev
  *
  *	Called from kernel PCI layer.
  *