From: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
To: hch@infradead.org
Cc: axboe@kernel.dk, linux-block@vger.kernel.org,
linux-kernel@vger.kernel.org,
Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Subject: Re: [PATCH] block: Removed a warning while compiling with a cross compiler for parisc
Date: Fri, 2 Jul 2021 00:01:30 +0200 [thread overview]
Message-ID: <20210701220130.226582-1-abd.masalkhi@gmail.com> (raw)
Thank you Christoph for your comment, you are absolutely right, my previous
solution has not actually solved the problem... I have not know about %pg,
it is a nice feature, I hope I have used correctly!! and about div_u64 I
have found out that each time div_u64 was used the stack frame increased
dramatically, so I wrapped with a wrapper function and used the noinline
attribute, and if there is any mistakes or if i have do not something not
correct I am happy to hear them.
And I am sorry for the late respond, I was at work, delivering pizza. next
time, if you have ordered a pizza and I was the deliver, it will be on me.
Thank you again!
Kind Regards,
Abd-Alrhman,
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
---
block/genhd.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/block/genhd.c b/block/genhd.c
index 79aa40b4c39c..c32b7716381a 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1106,6 +1106,12 @@ const struct device_type disk_type = {
};
#ifdef CONFIG_PROC_FS
+
+static noinline unsigned int call_div_u64(u64 dividend, u32 divisor)
+{
+ return (unsigned int)div_u64(dividend, divisor);
+}
+
/*
* aggregate disk stat collector. Uses the same stats that the sysfs
* entries do, above, but makes them available through one seq_file.
@@ -1117,7 +1123,6 @@ static int diskstats_show(struct seq_file *seqf, void *v)
{
struct gendisk *gp = v;
struct block_device *hd;
- char buf[BDEVNAME_SIZE];
unsigned int inflight;
struct disk_stats stat;
unsigned long idx;
@@ -1140,40 +1145,36 @@ static int diskstats_show(struct seq_file *seqf, void *v)
else
inflight = part_in_flight(hd);
- seq_printf(seqf, "%4d %7d %s "
+ seq_printf(seqf, "%4d %7d %pg "
"%lu %lu %lu %u "
"%lu %lu %lu %u "
"%u %u %u "
"%lu %lu %lu %u "
"%lu %u"
"\n",
- MAJOR(hd->bd_dev), MINOR(hd->bd_dev),
- disk_name(gp, hd->bd_partno, buf),
+ MAJOR(hd->bd_dev), MINOR(hd->bd_dev), gp,
stat.ios[STAT_READ],
stat.merges[STAT_READ],
stat.sectors[STAT_READ],
- (unsigned int)div_u64(stat.nsecs[STAT_READ],
- NSEC_PER_MSEC),
+ call_div_u64(stat.nsecs[STAT_READ], NSEC_PER_MSEC),
stat.ios[STAT_WRITE],
stat.merges[STAT_WRITE],
stat.sectors[STAT_WRITE],
- (unsigned int)div_u64(stat.nsecs[STAT_WRITE],
- NSEC_PER_MSEC),
+ call_div_u64(stat.nsecs[STAT_WRITE], NSEC_PER_MSEC),
inflight,
jiffies_to_msecs(stat.io_ticks),
- (unsigned int)div_u64(stat.nsecs[STAT_READ] +
- stat.nsecs[STAT_WRITE] +
- stat.nsecs[STAT_DISCARD] +
- stat.nsecs[STAT_FLUSH],
- NSEC_PER_MSEC),
+ call_div_u64(stat.nsecs[STAT_READ] +
+ stat.nsecs[STAT_WRITE] +
+ stat.nsecs[STAT_DISCARD] +
+ stat.nsecs[STAT_FLUSH],
+ NSEC_PER_MSEC),
stat.ios[STAT_DISCARD],
stat.merges[STAT_DISCARD],
stat.sectors[STAT_DISCARD],
- (unsigned int)div_u64(stat.nsecs[STAT_DISCARD],
- NSEC_PER_MSEC),
+ call_div_u64(stat.nsecs[STAT_DISCARD],
+ NSEC_PER_MSEC),
stat.ios[STAT_FLUSH],
- (unsigned int)div_u64(stat.nsecs[STAT_FLUSH],
- NSEC_PER_MSEC)
+ call_div_u64(stat.nsecs[STAT_FLUSH], NSEC_PER_MSEC)
);
}
rcu_read_unlock();
--
2.29.0.rc1.dirty
next reply other threads:[~2021-07-01 22:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-01 22:01 Abd-Alrhman Masalkhi [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-06-30 21:42 [PATCH] block: Removed a warning while compiling with a cross compiler for parisc Abd-Alrhman Masalkhi
2021-07-01 10:07 ` Christoph Hellwig
2021-06-30 8:10 Abd-Alrhman Masalkhi
2021-06-30 13:23 ` kernel test robot
2021-06-30 13:47 ` kernel test robot
2021-06-30 18:21 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210701220130.226582-1-abd.masalkhi@gmail.com \
--to=abd.masalkhi@gmail.com \
--cc=axboe@kernel.dk \
--cc=hch@infradead.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox