From: Pankaj Raghav <p.raghav@samsung.com>
To: snitzer@kernel.org, axboe@kernel.dk, agk@redhat.com, hch@lst.de,
damien.lemoal@opensource.wdc.com
Cc: jaegeuk@kernel.org, gost.dev@samsung.com, bvanassche@acm.org,
linux-kernel@vger.kernel.org, hare@suse.de,
matias.bjorling@wdc.com, Johannes.Thumshirn@wdc.com,
linux-block@vger.kernel.org, linux-nvme@lists.infradead.org,
pankydev8@gmail.com, dm-devel@redhat.com,
Pankaj Raghav <p.raghav@samsung.com>,
Chaitanya Kulkarni <kch@nvidia.com>,
Johannes Thumshirn <johannes.thumshirn@wdc.com>
Subject: [PATCH v15 02/13] block: rearrange bdev_{is_zoned,zone_sectors,get_queue} helper in blkdev.h
Date: Fri, 23 Sep 2022 19:36:07 +0200 [thread overview]
Message-ID: <20220923173618.6899-3-p.raghav@samsung.com> (raw)
In-Reply-To: <20220923173618.6899-1-p.raghav@samsung.com>
Define bdev_is_zoned(), bdev_zone_sectors() and bdev_get_queue() earlier
in the blkdev.h include file. Simplify bdev_is_zoned() by removing the
superfluous NULL check for request queue while we are at it.
This commit has no functional change, and it is a prep patch for allowing
zoned devices with non-power-of-2 zone sizes in the block layer.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
---
include/linux/blkdev.h | 43 +++++++++++++++++++-----------------------
1 file changed, 19 insertions(+), 24 deletions(-)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 6c6bf4dd5709..6cf43f9384cc 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -635,6 +635,11 @@ static inline bool queue_is_mq(struct request_queue *q)
return q->mq_ops;
}
+static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
+{
+ return bdev->bd_queue; /* this is never NULL */
+}
+
#ifdef CONFIG_PM
static inline enum rpm_status queue_rpm_status(struct request_queue *q)
{
@@ -666,6 +671,20 @@ static inline bool blk_queue_is_zoned(struct request_queue *q)
}
}
+static inline bool bdev_is_zoned(struct block_device *bdev)
+{
+ return blk_queue_is_zoned(bdev_get_queue(bdev));
+}
+
+static inline sector_t bdev_zone_sectors(struct block_device *bdev)
+{
+ struct request_queue *q = bdev_get_queue(bdev);
+
+ if (!blk_queue_is_zoned(q))
+ return 0;
+ return q->limits.chunk_sectors;
+}
+
#ifdef CONFIG_BLK_DEV_ZONED
static inline unsigned int disk_nr_zones(struct gendisk *disk)
{
@@ -892,11 +911,6 @@ int bio_poll(struct bio *bio, struct io_comp_batch *iob, unsigned int flags);
int iocb_bio_iopoll(struct kiocb *kiocb, struct io_comp_batch *iob,
unsigned int flags);
-static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
-{
- return bdev->bd_queue; /* this is never NULL */
-}
-
/* Helper to convert BLK_ZONE_ZONE_XXX to its string format XXX */
const char *blk_zone_cond_str(enum blk_zone_cond zone_cond);
@@ -1296,25 +1310,6 @@ static inline enum blk_zoned_model bdev_zoned_model(struct block_device *bdev)
return BLK_ZONED_NONE;
}
-static inline bool bdev_is_zoned(struct block_device *bdev)
-{
- struct request_queue *q = bdev_get_queue(bdev);
-
- if (q)
- return blk_queue_is_zoned(q);
-
- return false;
-}
-
-static inline sector_t bdev_zone_sectors(struct block_device *bdev)
-{
- struct request_queue *q = bdev_get_queue(bdev);
-
- if (!blk_queue_is_zoned(q))
- return 0;
- return q->limits.chunk_sectors;
-}
-
static inline int queue_dma_alignment(const struct request_queue *q)
{
return q ? q->dma_alignment : 511;
--
2.25.1
next prev parent reply other threads:[~2022-09-23 17:36 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220923173619eucas1p13e645adbe1c8eb62fb48b52c0248ed65@eucas1p1.samsung.com>
2022-09-23 17:36 ` [PATCH v15 00/13] support zoned block devices with non-power-of-2 zone sizes Pankaj Raghav
2022-09-23 17:36 ` [PATCH v15 01/13] block: make bdev_nr_zones and disk_zone_no generic for npo2 zone size Pankaj Raghav
2022-09-23 17:36 ` Pankaj Raghav [this message]
2022-09-23 17:36 ` [PATCH v15 03/13] block: allow blk-zoned devices to have non-power-of-2 " Pankaj Raghav
2022-09-23 17:36 ` [PATCH v15 04/13] nvmet: Allow ZNS target to support non-power_of_2 zone sizes Pankaj Raghav
2022-09-23 17:36 ` [PATCH v15 05/13] nvme: zns: Allow ZNS drives that have non-power_of_2 zone size Pankaj Raghav
2022-09-23 17:36 ` [PATCH v15 06/13] null_blk: allow zoned devices with non power-of-2 zone sizes Pankaj Raghav
2022-09-23 17:36 ` [PATCH v15 07/13] zonefs: allow non power of 2 zoned devices Pankaj Raghav
2022-09-28 18:10 ` Bart Van Assche
2022-09-23 17:36 ` [PATCH v15 08/13] dm-zoned: ensure only power of 2 zone sizes are allowed Pankaj Raghav
2022-09-23 17:36 ` [PATCH v15 09/13] dm-zone: use generic helpers to calculate offset from zone start Pankaj Raghav
2022-09-23 17:36 ` [PATCH v15 10/13] dm-table: allow zoned devices with non power-of-2 zone sizes Pankaj Raghav
2022-09-23 17:36 ` [PATCH v15 11/13] dm: call dm_zone_endio after the target endio callback for zoned devices Pankaj Raghav
2022-09-28 18:13 ` Bart Van Assche
2022-09-23 17:36 ` [PATCH v15 12/13] dm: introduce DM_EMULATED_ZONES target feature flag Pankaj Raghav
2022-09-23 17:36 ` [PATCH v15 13/13] dm: add power-of-2 target for zoned devices with non power-of-2 zone sizes Pankaj Raghav
2022-09-27 16:07 ` Pankaj Raghav
2022-09-28 14:22 ` Mike Snitzer
2022-09-29 6:31 ` [PATCH v15 00/13] support zoned block devices with non-power-of-2 " Pankaj Raghav
2022-09-30 15:13 ` Jens Axboe
2022-09-30 19:38 ` Bart Van Assche
2022-09-30 21:24 ` Jens Axboe
2022-10-24 19:02 ` Bart Van Assche
2022-10-01 0:45 ` Damien Le Moal
2022-10-01 2:14 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220923173618.6899-3-p.raghav@samsung.com \
--to=p.raghav@samsung.com \
--cc=Johannes.Thumshirn@wdc.com \
--cc=agk@redhat.com \
--cc=axboe@kernel.dk \
--cc=bvanassche@acm.org \
--cc=damien.lemoal@opensource.wdc.com \
--cc=dm-devel@redhat.com \
--cc=gost.dev@samsung.com \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=jaegeuk@kernel.org \
--cc=kch@nvidia.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=matias.bjorling@wdc.com \
--cc=pankydev8@gmail.com \
--cc=snitzer@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox