From: Michael Schmitz <schmitzmic@gmail.com>
To: linux-block@vger.kernel.org, axboe@kernel.dk
Cc: linux-m68k@vger.kernel.org, geert@linux-m68k.org, hch@lst.de,
martin@lichtvoll.de, fthain@linux-m68k.org,
Michael Schmitz <schmitzmic@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH v12 2/3] block: change annotation of rdb_CylBlocks in affs_hardblocks.h
Date: Sat, 17 Jun 2023 10:36:15 +1200 [thread overview]
Message-ID: <20230616223616.6002-3-schmitzmic@gmail.com> (raw)
In-Reply-To: <20230616223616.6002-1-schmitzmic@gmail.com>
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 of this series).
Patch 3 (this series) adds additional error checking and warning
messages. One of the error checks now makes use of the previously
unused rdb_CylBlocks field, which causes a 'sparse' warning
(cast to restricted __be32).
Annotate all 32 bit fields in affs_hardblocks.h as __be32, as the
on-disk format of RDB and partition blocks is always big endian.
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
Changes from v10:
Christoph Hellwig:
- change annotation of all __u32 fields to __be32
Changes from v11:
Geert Uytterhoeven:
- also change annotation of the two __s32 checksum fields
---
include/uapi/linux/affs_hardblocks.h | 68 ++++++++++++++--------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/include/uapi/linux/affs_hardblocks.h b/include/uapi/linux/affs_hardblocks.h
index 5e2fb8481252..a5aff2eb5f70 100644
--- a/include/uapi/linux/affs_hardblocks.h
+++ b/include/uapi/linux/affs_hardblocks.h
@@ -7,42 +7,42 @@
/* Just the needed definitions for the RDB of an Amiga HD. */
struct RigidDiskBlock {
- __u32 rdb_ID;
+ __be32 rdb_ID;
__be32 rdb_SummedLongs;
- __s32 rdb_ChkSum;
- __u32 rdb_HostID;
+ __be32 rdb_ChkSum;
+ __be32 rdb_HostID;
__be32 rdb_BlockBytes;
- __u32 rdb_Flags;
- __u32 rdb_BadBlockList;
+ __be32 rdb_Flags;
+ __be32 rdb_BadBlockList;
__be32 rdb_PartitionList;
- __u32 rdb_FileSysHeaderList;
- __u32 rdb_DriveInit;
- __u32 rdb_Reserved1[6];
- __u32 rdb_Cylinders;
- __u32 rdb_Sectors;
- __u32 rdb_Heads;
- __u32 rdb_Interleave;
- __u32 rdb_Park;
- __u32 rdb_Reserved2[3];
- __u32 rdb_WritePreComp;
- __u32 rdb_ReducedWrite;
- __u32 rdb_StepRate;
- __u32 rdb_Reserved3[5];
- __u32 rdb_RDBBlocksLo;
- __u32 rdb_RDBBlocksHi;
- __u32 rdb_LoCylinder;
- __u32 rdb_HiCylinder;
- __u32 rdb_CylBlocks;
- __u32 rdb_AutoParkSeconds;
- __u32 rdb_HighRDSKBlock;
- __u32 rdb_Reserved4;
+ __be32 rdb_FileSysHeaderList;
+ __be32 rdb_DriveInit;
+ __be32 rdb_Reserved1[6];
+ __be32 rdb_Cylinders;
+ __be32 rdb_Sectors;
+ __be32 rdb_Heads;
+ __be32 rdb_Interleave;
+ __be32 rdb_Park;
+ __be32 rdb_Reserved2[3];
+ __be32 rdb_WritePreComp;
+ __be32 rdb_ReducedWrite;
+ __be32 rdb_StepRate;
+ __be32 rdb_Reserved3[5];
+ __be32 rdb_RDBBlocksLo;
+ __be32 rdb_RDBBlocksHi;
+ __be32 rdb_LoCylinder;
+ __be32 rdb_HiCylinder;
+ __be32 rdb_CylBlocks;
+ __be32 rdb_AutoParkSeconds;
+ __be32 rdb_HighRDSKBlock;
+ __be32 rdb_Reserved4;
char rdb_DiskVendor[8];
char rdb_DiskProduct[16];
char rdb_DiskRevision[4];
char rdb_ControllerVendor[8];
char rdb_ControllerProduct[16];
char rdb_ControllerRevision[4];
- __u32 rdb_Reserved5[10];
+ __be32 rdb_Reserved5[10];
};
#define IDNAME_RIGIDDISK 0x5244534B /* "RDSK" */
@@ -50,16 +50,16 @@ struct RigidDiskBlock {
struct PartitionBlock {
__be32 pb_ID;
__be32 pb_SummedLongs;
- __s32 pb_ChkSum;
- __u32 pb_HostID;
+ __be32 pb_ChkSum;
+ __be32 pb_HostID;
__be32 pb_Next;
- __u32 pb_Flags;
- __u32 pb_Reserved1[2];
- __u32 pb_DevFlags;
+ __be32 pb_Flags;
+ __be32 pb_Reserved1[2];
+ __be32 pb_DevFlags;
__u8 pb_DriveName[32];
- __u32 pb_Reserved2[15];
+ __be32 pb_Reserved2[15];
__be32 pb_Environment[17];
- __u32 pb_EReserved[15];
+ __be32 pb_EReserved[15];
};
#define IDNAME_PARTITION 0x50415254 /* "PART" */
--
2.17.1
next prev parent reply other threads:[~2023-06-16 22:36 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-16 22:36 [PATCH v12 0/3] Amiga RDB partition support fixes Michael Schmitz
2023-06-16 22:36 ` [PATCH v12 1/3] block: fix signed int overflow in Amiga partition support Michael Schmitz
2023-06-16 22:36 ` Michael Schmitz [this message]
2023-06-17 11:08 ` [PATCH v12 2/3] block: change annotation of rdb_CylBlocks in affs_hardblocks.h Geert Uytterhoeven
2023-06-18 3:10 ` Michael Schmitz
2023-06-18 7:51 ` Geert Uytterhoeven
2023-06-19 2:53 ` Michael Schmitz
2023-06-16 22:36 ` [PATCH v12 3/3] block: add overflow checks for Amiga partition support Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230616223616.6002-3-schmitzmic@gmail.com \
--to=schmitzmic@gmail.com \
--cc=axboe@kernel.dk \
--cc=fthain@linux-m68k.org \
--cc=geert@linux-m68k.org \
--cc=hch@lst.de \
--cc=linux-block@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=martin@lichtvoll.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).