From: Ming Lei <ming.lei@redhat.com>
To: Jens Axboe <axboe@kernel.dk>, linux-block@vger.kernel.org
Cc: Ming Lei <ming.lei@redhat.com>,
syzbot+2bcecf3c38cb3e8fdc8d@syzkaller.appspotmail.com,
Yu Kuai <yukuai3@huawei.com>, Nilay Shroff <nilay@linux.ibm.com>
Subject: [PATCH] nbd: fix lockdep deadlock warning
Date: Wed, 9 Jul 2025 09:41:09 +0800 [thread overview]
Message-ID: <20250709014109.2292837-1-ming.lei@redhat.com> (raw)
nbd grabs device lock nbd->config_lock for updating nr_hw_queues, this
ways cause the following lock dependency:
-> #2 (&disk->open_mutex){+.+.}-{4:4}:
lock_acquire kernel/locking/lockdep.c:5871 [inline]
lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828
__mutex_lock_common kernel/locking/mutex.c:602 [inline]
__mutex_lock+0x166/0x1292 kernel/locking/mutex.c:747
mutex_lock_nested+0x14/0x1c kernel/locking/mutex.c:799
__del_gendisk+0x132/0xac6 block/genhd.c:706
del_gendisk+0xf6/0x19a block/genhd.c:819
nbd_dev_remove+0x3c/0xf2 drivers/block/nbd.c:268
nbd_dev_remove_work+0x1c/0x26 drivers/block/nbd.c:284
process_one_work+0x96a/0x1f32 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3321 [inline]
worker_thread+0x5ce/0xde8 kernel/workqueue.c:3402
kthread+0x39c/0x7d4 kernel/kthread.c:464
ret_from_fork_kernel+0x2a/0xbb2 arch/riscv/kernel/process.c:214
ret_from_fork_kernel_asm+0x16/0x18 arch/riscv/kernel/entry.S:327
-> #1 (&set->update_nr_hwq_lock){++++}-{4:4}:
lock_acquire kernel/locking/lockdep.c:5871 [inline]
lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828
down_write+0x9c/0x19a kernel/locking/rwsem.c:1577
blk_mq_update_nr_hw_queues+0x3e/0xb86 block/blk-mq.c:5041
nbd_start_device+0x140/0xb2c drivers/block/nbd.c:1476
nbd_genl_connect+0xae0/0x1b24 drivers/block/nbd.c:2201
genl_family_rcv_msg_doit+0x206/0x2e6 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x514/0x78e net/netlink/genetlink.c:1210
netlink_rcv_skb+0x206/0x3be net/netlink/af_netlink.c:2534
genl_rcv+0x36/0x4c net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x4f0/0x82c net/netlink/af_netlink.c:1339
netlink_sendmsg+0x85e/0xdd6 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0xcc/0x160 net/socket.c:727
____sys_sendmsg+0x63e/0x79c net/socket.c:2566
___sys_sendmsg+0x144/0x1e6 net/socket.c:2620
__sys_sendmsg+0x188/0x246 net/socket.c:2652
__do_sys_sendmsg net/socket.c:2657 [inline]
__se_sys_sendmsg net/socket.c:2655 [inline]
__riscv_sys_sendmsg+0x70/0xa2 net/socket.c:2655
syscall_handler+0x94/0x118 arch/riscv/include/asm/syscall.h:112
do_trap_ecall_u+0x396/0x530 arch/riscv/kernel/traps.c:341
handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197
-> #0 (&nbd->config_lock){+.+.}-{4:4}:
check_noncircular+0x132/0x146 kernel/locking/lockdep.c:2178
check_prev_add kernel/locking/lockdep.c:3168 [inline]
check_prevs_add kernel/locking/lockdep.c:3287 [inline]
validate_chain kernel/locking/lockdep.c:3911 [inline]
__lock_acquire+0x12b2/0x24ea kernel/locking/lockdep.c:5240
lock_acquire kernel/locking/lockdep.c:5871 [inline]
lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828
__mutex_lock_common kernel/locking/mutex.c:602 [inline]
__mutex_lock+0x166/0x1292 kernel/locking/mutex.c:747
mutex_lock_nested+0x14/0x1c kernel/locking/mutex.c:799
refcount_dec_and_mutex_lock+0x60/0xd8 lib/refcount.c:118
nbd_config_put+0x3a/0x610 drivers/block/nbd.c:1423
nbd_release+0x94/0x15c drivers/block/nbd.c:1735
blkdev_put_whole+0xac/0xee block/bdev.c:721
bdev_release+0x3fe/0x600 block/bdev.c:1144
blkdev_release+0x1a/0x26 block/fops.c:684
__fput+0x382/0xa8c fs/file_table.c:465
____fput+0x1c/0x26 fs/file_table.c:493
task_work_run+0x16a/0x25e kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0x118/0x134 kernel/entry/common.c:114
exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline]
do_trap_ecall_u+0x3f0/0x530 arch/riscv/kernel/traps.c:355
handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197
Also it isn't necessary to require nbd->config_lock, because
blk_mq_update_nr_hw_queues() does grab tagset lock for sync everything.
Fixes the issue by releasing ->config_lock & retry in case of concurrent
updating nr_hw_queues.
Fixes: 98e68f67020c ("block: prevent adding/deleting disk during updating nr_hw_queues")
Reported-by: syzbot+2bcecf3c38cb3e8fdc8d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6855034f.a00a0220.137b3.0031.GAE@google.com
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
---
drivers/block/nbd.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 7bdc7eb808ea..136640e4c866 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -1473,7 +1473,15 @@ static int nbd_start_device(struct nbd_device *nbd)
return -EINVAL;
}
- blk_mq_update_nr_hw_queues(&nbd->tag_set, config->num_connections);
+retry:
+ mutex_unlock(&nbd->config_lock);
+ blk_mq_update_nr_hw_queues(&nbd->tag_set, num_connections);
+ mutex_lock(&nbd->config_lock);
+
+ /* if another code path updated nr_hw_queues, retry until succeed */
+ if (num_connections != config->num_connections)
+ goto retry;
+
nbd->pid = task_pid_nr(current);
nbd_parse_flags(nbd);
--
2.47.0
next reply other threads:[~2025-07-09 1:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-09 1:41 Ming Lei [this message]
2025-07-09 6:46 ` [PATCH] nbd: fix lockdep deadlock warning 余快
2025-07-09 7:59 ` Nilay Shroff
2025-07-09 8:10 ` Ming Lei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250709014109.2292837-1-ming.lei@redhat.com \
--to=ming.lei@redhat.com \
--cc=axboe@kernel.dk \
--cc=linux-block@vger.kernel.org \
--cc=nilay@linux.ibm.com \
--cc=syzbot+2bcecf3c38cb3e8fdc8d@syzkaller.appspotmail.com \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox