[PATCH v4 19/19] selftests: ublk: add end-to-end integrity test

[Caleb Sander Mateos <csander@purestorage.com>]

Add test case loop_08 to verify the ublk integrity data flow. It uses
the kublk loop target to create a ublk device with integrity on top of
backing data and integrity files. It then writes to the whole device
with fio configured to generate integrity data. Then it reads back the
whole device with fio configured to verify the integrity data.
It also verifies that injected guard, reftag, and apptag corruptions are
correctly detected.

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
---
 tools/testing/selftests/ublk/Makefile        |   1 +
 tools/testing/selftests/ublk/test_loop_08.sh | 111 +++++++++++++++++++
 2 files changed, 112 insertions(+)
 create mode 100755 tools/testing/selftests/ublk/test_loop_08.sh

diff --git a/tools/testing/selftests/ublk/Makefile b/tools/testing/selftests/ublk/Makefile
index 239ad1c741ef..036a9f01b464 100644
--- a/tools/testing/selftests/ublk/Makefile
+++ b/tools/testing/selftests/ublk/Makefile
@@ -33,10 +33,11 @@ TEST_PROGS += test_loop_02.sh
 TEST_PROGS += test_loop_03.sh
 TEST_PROGS += test_loop_04.sh
 TEST_PROGS += test_loop_05.sh
 TEST_PROGS += test_loop_06.sh
 TEST_PROGS += test_loop_07.sh
+TEST_PROGS += test_loop_08.sh
 TEST_PROGS += test_stripe_01.sh
 TEST_PROGS += test_stripe_02.sh
 TEST_PROGS += test_stripe_03.sh
 TEST_PROGS += test_stripe_04.sh
 TEST_PROGS += test_stripe_05.sh
diff --git a/tools/testing/selftests/ublk/test_loop_08.sh b/tools/testing/selftests/ublk/test_loop_08.sh
new file mode 100755
index 000000000000..ca289cfb2ad4
--- /dev/null
+++ b/tools/testing/selftests/ublk/test_loop_08.sh
@@ -0,0 +1,111 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh
+
+if ! _have_program fio; then
+	exit $UBLK_SKIP_CODE
+fi
+
+fio_version=$(fio --version)
+if [[ "$fio_version" =~ fio-[0-9]+\.[0-9]+$ ]]; then
+	echo "Requires development fio version with https://github.com/axboe/fio/pull/1992"
+	exit $UBLK_SKIP_CODE
+fi
+
+TID=loop_08
+
+_prep_test "loop" "end-to-end integrity"
+
+_create_backfile 0 256M
+_create_backfile 1 32M # 256M * (64 integrity bytes / 512 data bytes)
+integrity_params="--integrity_capable --integrity_reftag
+                  --metadata_size 64 --pi_offset 56 --csum_type t10dif"
+dev_id=$(_add_ublk_dev -t loop -u $integrity_params "${UBLK_BACKFILES[@]}")
+_check_add_dev $TID $?
+
+# 1M * (64 integrity bytes / 512 data bytes) = 128K
+fio_args="--ioengine io_uring --direct 1 --bsrange 512-1M --iodepth 32
+          --md_per_io_size 128K --pi_act 0 --pi_chk GUARD,REFTAG,APPTAG
+          --filename /dev/ublkb$dev_id"
+fio --name fill --rw randwrite $fio_args > /dev/null
+err=$?
+if [ $err != 0 ]; then
+	echo "fio fill failed"
+	_show_result $TID $err
+fi
+
+fio --name verify --rw randread $fio_args > /dev/null
+err=$?
+if [ $err != 0 ]; then
+	echo "fio verify failed"
+	_show_result $TID $err
+fi
+
+fio_err=$(mktemp fio_err_XXXXX)
+
+# Overwrite 4-byte reftag at offset 56 + 4 = 60
+dd_reftag_args="bs=1 seek=60 count=4 oflag=dsync conv=notrunc status=none"
+dd if=/dev/urandom "of=${UBLK_BACKFILES[1]}" $dd_reftag_args
+err=$?
+if [ $err != 0 ]; then
+	echo "dd corrupted_reftag failed"
+	rm -f "$fio_err"
+	_show_result $TID $err
+fi
+if fio --name corrupted_reftag --rw randread $fio_args > /dev/null 2> "$fio_err"; then
+	echo "fio corrupted_reftag unexpectedly succeeded"
+	rm -f "$fio_err"
+	_show_result $TID 255
+fi
+expected_err="REFTAG compare error: LBA: 0 Expected=0, Actual="
+if ! grep -q "$expected_err" "$fio_err"; then
+	echo "fio corrupted_reftag message not found: $expected_err"
+	rm -f "$fio_err"
+	_show_result $TID 255
+fi
+# Reset to 0
+dd if=/dev/zero "of=${UBLK_BACKFILES[1]}" $dd_reftag_args
+err=$?
+if [ $err != 0 ]; then
+	echo "dd restore corrupted_reftag failed"
+	rm -f "$fio_err"
+	_show_result $TID $err
+fi
+
+dd_data_args="bs=512 count=1 oflag=direct,dsync conv=notrunc status=none"
+dd if=/dev/zero "of=${UBLK_BACKFILES[0]}" $dd_data_args
+err=$?
+if [ $err != 0 ]; then
+	echo "dd corrupted_data failed"
+	rm -f "$fio_err"
+	_show_result $TID $err
+fi
+if fio --name corrupted_data --rw randread $fio_args > /dev/null 2> "$fio_err"; then
+	echo "fio corrupted_data unexpectedly succeeded"
+	rm -f "$fio_err"
+	_show_result $TID 255
+fi
+expected_err="Guard compare error: LBA: 0 Expected=0, Actual="
+if ! grep -q "$expected_err" "$fio_err"; then
+	echo "fio corrupted_data message not found: $expected_err"
+	rm -f "$fio_err"
+	_show_result $TID 255
+fi
+
+if fio --name bad_apptag --rw randread $fio_args --apptag 0x4321 > /dev/null 2> "$fio_err"; then
+	echo "fio bad_apptag unexpectedly succeeded"
+	rm -f "$fio_err"
+	_show_result $TID 255
+fi
+expected_err="APPTAG compare error: LBA: [0-9]* Expected=4321, Actual=1234"
+if ! grep -q "$expected_err" "$fio_err"; then
+	echo "fio bad_apptag message not found: $expected_err"
+	rm -f "$fio_err"
+	_show_result $TID 255
+fi
+
+rm -f "$fio_err"
+
+_cleanup_test
+_show_result $TID 0
-- 
2.45.2