linux-block.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andreas Hindborg <nmi@metaspace.dk>
To: Niklas Cassel <Niklas.Cassel@wdc.com>
Cc: "linux-block@vger.kernel.org" <linux-block@vger.kernel.org>,
	"Hans Holmberg" <Hans.Holmberg@wdc.com>,
	"Matias Bjørling" <Matias.Bjorling@wdc.com>,
	"kernel test robot" <lkp@intel.com>,
	"Ming Lei" <ming.lei@redhat.com>, "Jens Axboe" <axboe@kernel.dk>,
	"open list" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] block: ublk: enable zoned storage support
Date: Mon, 27 Feb 2023 12:59:45 +0100	[thread overview]
Message-ID: <87ttz79u8p.fsf@metaspace.dk> (raw)
In-Reply-To: <Y/yD1WMJ5zc7KkBz@x1-carbon>


Niklas Cassel <Niklas.Cassel@wdc.com> writes:

> On Fri, Feb 24, 2023 at 09:05:01PM +0100, Andreas Hindborg wrote:
>> Add zoned storage support to ublk: report_zones and operations:
>>  - REQ_OP_ZONE_OPEN
>>  - REQ_OP_ZONE_CLOSE
>>  - REQ_OP_ZONE_FINISH
>>  - REQ_OP_ZONE_RESET
>> 
>> This allows implementation of zoned storage devices in user space. An
>> example user space implementation based on ubdsrv is available [1].
>> 
>> [1] https://github.com/metaspace/ubdsrv/commit/14a2b708f74f70cfecb076d92e680dc718cc1f6d
>> 
>> Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
>> ---
>> Changes since v1:
>>  - Fixed conditional compilation bug
>>  - Refactored to collect conditional code additions together
>>  - Fixed style errors
>>  - Zero stack allocated value used for zone report
>> 
>> Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
>> Reported-by: kernel test robot <lkp@intel.com>
>> Link: https://lore.kernel.org/oe-kbuild-all/202302250222.XOrw9j6z-lkp@intel.com/
>> v1: https://lore.kernel.org/linux-block/20230224125950.214779-1-nmi@metaspace.dk/
>> 
>>  drivers/block/ublk_drv.c      | 150 ++++++++++++++++++++++++++++++++--
>>  include/uapi/linux/ublk_cmd.h |  18 ++++
>>  2 files changed, 162 insertions(+), 6 deletions(-)
>> 
>> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
>> index 6368b56eacf1..37e516903867 100644
>> --- a/drivers/block/ublk_drv.c
>> +++ b/drivers/block/ublk_drv.c
>> @@ -20,6 +20,7 @@
>>  #include <linux/major.h>
>>  #include <linux/wait.h>
>>  #include <linux/blkdev.h>
>> +#include <linux/blkzoned.h>
>>  #include <linux/init.h>
>>  #include <linux/swap.h>
>>  #include <linux/slab.h>
>> @@ -51,10 +52,12 @@
>>  		| UBLK_F_URING_CMD_COMP_IN_TASK \
>>  		| UBLK_F_NEED_GET_DATA \
>>  		| UBLK_F_USER_RECOVERY \
>> -		| UBLK_F_USER_RECOVERY_REISSUE)
>> +		| UBLK_F_USER_RECOVERY_REISSUE \
>> +		| UBLK_F_ZONED)
>>  
>>  /* All UBLK_PARAM_TYPE_* should be included here */
>> -#define UBLK_PARAM_TYPE_ALL (UBLK_PARAM_TYPE_BASIC | UBLK_PARAM_TYPE_DISCARD)
>> +#define UBLK_PARAM_TYPE_ALL (UBLK_PARAM_TYPE_BASIC | UBLK_PARAM_TYPE_DISCARD \
>> +			     | UBLK_PARAM_TYPE_ZONED)
>>  
>>  struct ublk_rq_data {
>>  	struct llist_node node;
>> @@ -187,6 +190,98 @@ static DEFINE_MUTEX(ublk_ctl_mutex);
>>  
>>  static struct miscdevice ublk_misc;
>>  
>> +#ifdef CONFIG_BLK_DEV_ZONED
>> +static void ublk_set_nr_zones(struct ublk_device *ub)
>> +{
>> +	const struct ublk_param_basic *p = &ub->params.basic;
>> +
>> +	if (ub->dev_info.flags & UBLK_F_ZONED && p->chunk_sectors)
>> +		ub->ub_disk->nr_zones = p->dev_sectors / p->chunk_sectors;
>> +}
>> +
>> +static void ublk_dev_param_zoned_apply(struct ublk_device *ub)
>> +{
>> +	const struct ublk_param_zoned *p = &ub->params.zoned;
>> +
>> +	if (ub->dev_info.flags & UBLK_F_ZONED) {
>> +		disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
>> +		disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
>> +	}
>> +}
>> +
>> +static int ublk_revalidate_disk_zones(struct gendisk *disk)
>> +{
>> +	return blk_revalidate_disk_zones(disk, NULL);
>> +}
>> +
>> +static int ublk_report_zones(struct gendisk *disk, sector_t sector,
>> +			     unsigned int nr_zones, report_zones_cb cb,
>> +			     void *data)
>> +{
>> +	struct ublk_device *ub;
>> +	unsigned int zone_size;
>> +	unsigned int first_zone;
>> +	int ret = 0;
>> +
>> +	ub = disk->private_data;
>> +
>> +	if (!(ub->dev_info.flags & UBLK_F_ZONED))
>> +		return -EINVAL;
>> +
>> +	zone_size = disk->queue->limits.chunk_sectors;
>> +	first_zone = sector >> ilog2(zone_size);
>> +	nr_zones = min(ub->ub_disk->nr_zones - first_zone, nr_zones);
>> +
>> +	for (unsigned int i = 0; i < nr_zones; i++) {
>> +		struct request *req;
>> +		blk_status_t status;
>> +		struct blk_zone info = {0};
>> +
>> +		req = blk_mq_alloc_request(disk->queue, REQ_OP_DRV_IN, 0);
>> +
>> +		if (IS_ERR(req)) {
>> +			ret = PTR_ERR(req);
>> +			goto out;
>> +		}
>> +
>> +		req->__sector = sector;
>> +
>> +		ret = blk_rq_map_kern(disk->queue, req, &info, sizeof(info),
>> +				      GFP_KERNEL);
>> +
>> +		if (ret)
>> +			goto out;
>> +
>> +		status = blk_execute_rq(req, 0);
>> +		ret = blk_status_to_errno(status);
>> +		if (ret)
>> +			goto out;
>> +
>> +		blk_mq_free_request(req);
>> +
>> +		ret = cb(&info, i, data);
>> +		if (ret)
>> +			goto out;
>> +
>> +		/* A zero length zone means don't ask for more zones */
>> +		if (!info.len) {
>> +			nr_zones = i;
>> +			break;
>> +		}
>> +
>> +		sector += zone_size;
>> +	}
>> +	ret = nr_zones;
>> +
>> + out:
>> +	return ret;
>> +}
>> +#else
>> +void ublk_set_nr_zones(struct ublk_device *ub);
>> +void ublk_dev_param_zoned_apply(struct ublk_device *ub);
>> +int ublk_revalidate_disk_zones(struct gendisk *disk);
>
> These are declarations, shouldn't they be dummy definitions instead?

I looked at how nvme host defines nvme_revalidate_zones() when I did
this. The functions become undefined symbols but because the call sites
are optimized out they go away.

>
> e.g.
> static int ublk_revalidate_disk_zones(struct gendisk *disk) { return -EOPNOTSUPP; };

Not sure how this is better?

>
>
> It would be nice if they could be avoided altogether.
>
> Looking how e.g. null-blk and btrfs has solved this:
> https://github.com/torvalds/linux/blob/v6.2/fs/btrfs/Makefile#L39
> https://github.com/torvalds/linux/blob/v6.2/drivers/block/null_blk/Makefile#L11
>
> They have put the zoned stuff in a separate C file that is only compiled
> when CONFIG_BLK_DEV_ZONED is set.
>
> I'm not sure if a similar design is desired for ublk or not.
>
> However, if a similar design pattern was used, it could probably avoid
> some of these unpleasant dummy definitions altogether.

This is the same as I do here, except I put the declarations in the c
file instead of a header. I did this for two reasons 1) there is no ublk
header besides the uapi header (I would add a header just for this), 2)
the declarations need only exist inside ublk_drv.c. For btrfs, null_blk,
nvme, the declarations go in a header file and the functions in question
do not have static linkage.

I could move the function declarations out of the #else block, but then
they would need to be declared static and that gives a compiler warning
when the implementation is not present.

BR Andreas

  reply	other threads:[~2023-02-27 12:19 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-24 20:05 [PATCH v2] block: ublk: enable zoned storage support Andreas Hindborg
2023-02-27 10:20 ` Niklas Cassel
2023-02-27 11:59   ` Andreas Hindborg [this message]
2023-02-27 14:29     ` Niklas Cassel
2023-02-27 14:41       ` Andreas Hindborg
2023-02-27 15:20 ` Minwoo Im
2023-02-27 15:36   ` Andreas Hindborg
2023-02-28  9:52 ` Hans Holmberg
2023-03-01  7:28   ` Andreas Hindborg
2023-03-02  2:50 ` Ming Lei
2023-03-02  7:31   ` Andreas Hindborg
2023-03-02  8:19     ` Damien Le Moal
2023-03-02  8:32     ` Ming Lei
2023-03-02  9:01       ` Ming Lei
2023-03-02  9:14         ` Ming Lei
2023-03-02 10:07           ` Andreas Hindborg
2023-03-02 13:16             ` Ming Lei
2023-03-02 13:28               ` Andreas Hindborg
2023-03-03  2:59                 ` Ming Lei
2023-03-03  8:27                   ` Andreas Hindborg
2023-03-03 11:47                     ` Ming Lei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87ttz79u8p.fsf@metaspace.dk \
    --to=nmi@metaspace.dk \
    --cc=Hans.Holmberg@wdc.com \
    --cc=Matias.Bjorling@wdc.com \
    --cc=Niklas.Cassel@wdc.com \
    --cc=axboe@kernel.dk \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lkp@intel.com \
    --cc=ming.lei@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).