[Bluez-devel] Qualification - L2CA_DisconnectCfm

["Daryl Van Vorst" <daryl@wideray.com>]

Max, Marcel,

In order to pass TP/COS/CED/BV-08 we're supposed to be able to indicate tha=
t
there was a timeout waiting for an L2CAP disconnect confirm from the remote
device. I'm waiting for clarification that this is indeed necessary.

The test works like this:

1. We send a disconnect request
2. The tester ignores it.
3. optionally - we resend the disconnect request following a timeout patter=
n
where each retransmission happens after a delay equal to twice the previous
delay.
4. After 60 seconds the channel must be closed - we indicated to the app
that the channel is indeed closed (even though we didn't get a confirmation
from the remote side) and indicate that a timeout ocurred.

I think there's a standard way of doing that sort of thing by setting a
socket option which causes close() to block until things are closed. Not
sure though.

Can we do this with BlueZ?

-Daryl.



-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com

_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel