From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <001901c417c1$c5690e60$4000fe0a@rtsviec64> From: "Harald Meier" To: "Marcel Holtmann" Cc: "BlueZ Mailing List" References: <003201c4161f$d37a2050$4000fe0a@rtsviec64> <1080630888.4094.5.camel@pegasus> <004501c417b0$76df38c0$4000fe0a@rtsviec64> <1080803375.2565.7.camel@pegasus> Subject: Re: [Bluez-users] PAND and RFCOMM simultaneously Date: Thu, 1 Apr 2004 10:17:23 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" List-ID: Hi Marcel! Thank you for this information! Should I be able to update this chipset firmware with the bluez-fw package? Thanks for help, Harald. ----- Original Message ----- From: "Marcel Holtmann" To: "Harald Meier" Cc: "BlueZ Mailing List" Sent: Thursday, April 01, 2004 9:09 AM Subject: Re: [Bluez-users] PAND and RFCOMM simultaneously > Hi Harald, > > > the output of hciconfig -a is: > > hci0: Type: PCIBD Address: 00:02:78:02:2E:C3 ACL MTU: 192:8 SCO MTU: > > 64:8 > > UP RUNNING PSCAN ISCAN > > RX bytes:70 acl:0 sco:0 events:7 errors:0 > > TX bytes:34 acl:0 sco:0 commands:7 errors:0 > > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 > > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > > Link policy: > > Link mode: SLAVE ACCEPT > > Name: 'ka0009 (0)' > > Class: 0x000000 > > Service Classes: Unspecified > > Device Class: Miscellaneous, > > HCI Ver: 1.1 (0x1) HCI Rev: 0x175 LMP Ver: 1.1 (0x1) LMP Subver: > > 0x175 > > Manufacturer: Cambridge Silicon Radio (10) > > > > Sorry for the last unformatted output, I pressed accidentally the send > > button. > > I thought I already answered this, but it seems that I didn't :( > > To run an inquiry while you already have an ACL link open, you need at > least the HCI 16.4 firmware on your Bluetooth chip. > > Regards > > Marcel >