Bluetooth monitor ver 5.30 = New Index: 00:1A:7D:DA:71:13 (BR/EDR,USB,hci0) [hci0] 0.818376 @ Device Removed: 00:1B:DC:07:33:4E (0) @ Device Removed: 00:1A:7D:DA:71:13 (0) @ Device Removed: 00:02:CA:C0:54:EF (0) @ Device Removed: CC:C3:EA:FF:E2:5F (0) < HCI Command: Write Extended Inquiry.. (0x03|0x0052) plen 241 [hci0] 7.860053 FEC: Not required (0x00) Name (complete): gowtham-ab-0 TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.1.14 (0x051e) 16-bit Service UUIDs (complete): 2 entries Generic Access Profile (0x1800) Generic Attribute Profile (0x1801) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.863002 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) < HCI Command: Write Extended Inquiry.. (0x03|0x0052) plen 241 [hci0] 8.165743 FEC: Not required (0x00) Name (complete): gowtham-ab-0 TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.1.14 (0x051e) 16-bit Service UUIDs (complete): 3 entries Generic Access Profile (0x1800) Generic Attribute Profile (0x1801) A/V Remote Control (0x110e) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.168976 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) < HCI Command: Write Extended Inquiry.. (0x03|0x0052) plen 241 [hci0] 8.180847 FEC: Not required (0x00) Name (complete): gowtham-ab-0 TX power: 4 dBm Device ID: USB Implementer's Forum assigned (0x0002) Vendor: Linux Foundation (0x1d6b) Product: 0x0246 Version: 5.1.14 (0x051e) 16-bit Service UUIDs (complete): 4 entries Generic Access Profile (0x1800) Generic Attribute Profile (0x1801) A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.183971 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) @ Device Unblocked: 00:00:00:00:00:00 (0) @ Device Added: CC:C3:EA:FF:E2:5F (0) 1 @ Device Added: 00:02:CA:C0:54:EF (0) 1 @ Device Added: 00:1A:7D:DA:71:13 (0) 1 @ Device Added: 00:1B:DC:07:33:4E (0) 1 < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] 8.203096 Scan enable: Page Scan (0x02) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.203973 Write Scan Enable (0x03|0x001a) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32 [hci0] 8.204000 Length: 3 TX power: 8 dBm @ New Settings: 0x0ad1 powered bondable ssp br/edr le secure-conn > HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.218973 LE Set Advertising Data (0x08|0x0008) ncmd 1 Status: Success (0x00) @ New Settings: 0x0ad3 powered connectable bondable ssp br/edr le secure-conn < HCI Command: Write Current IAC LAP (0x03|0x003a) plen 4 [hci0] 8.247932 Number of IAC: 1 Access code: 0x9e8b33 (General Inquiry) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.248995 Write Current IAC LAP (0x03|0x003a) ncmd 1 Status: Success (0x00) < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] 8.249021 Scan enable: Inquiry Scan + Page Scan (0x03) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.250973 Write Scan Enable (0x03|0x001a) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32 [hci0] 8.251005 Length: 6 Flags: 0x02 LE General Discoverable Mode TX power: 8 dBm > HCI Event: Command Complete (0x0e) plen 4 [hci0] 8.255980 LE Set Advertising Data (0x08|0x0008) ncmd 1 Status: Success (0x00) @ New Settings: 0x0adb powered connectable discoverable bondable ssp br/edr le secure-conn < HCI Command: Create Connection (0x01|0x0005) plen 13 [hci0] 124.720498 Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) Packet type: 0xcc18 DM1 may be used DH1 may be used DM3 may be used DH3 may be used DM5 may be used DH5 may be used Page scan repetition mode: R2 (0x02) Page scan mode: Mandatory (0x00) Clock offset: 0x0000 Role switch: Allow slave (0x01) > HCI Event: Command Status (0x0f) plen 4 [hci0] 124.734081 Create Connection (0x01|0x0005) ncmd 1 Status: Success (0x00) > HCI Event: Connect Complete (0x03) plen 11 [hci0] 127.725098 Status: Success (0x00) Handle: 70 Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Read Remote Supported... (0x01|0x001b) plen 2 [hci0] 127.725227 Handle: 70 > HCI Event: Command Status (0x0f) plen 4 [hci0] 127.730074 Read Remote Supported Features (0x01|0x001b) ncmd 0 Status: Success (0x00) > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 [hci0] 127.735080 Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) Page scan repetition mode: R1 (0x01) > HCI Event: Max Slots Change (0x1b) plen 3 [hci0] 127.738110 Handle: 70 Max slots: 5 > HCI Event: Command Status (0x0f) plen 4 [hci0] 127.751101 NOP (0x00|0x0000) ncmd 1 Status: Success (0x00) > HCI Event: Read Remote Supported Features (0x0b) plen 11 [hci0] 127.758124 Status: Success (0x00) Handle: 70 Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87 3 slot packets 5 slot packets Encryption Slot offset Timing accuracy Role switch Hold mode Sniff mode Park state Power control requests Channel quality driven data rate (CQDDR) SCO link HV2 packets HV3 packets u-law log synchronous data A-law log synchronous data CVSD synchronous data Paging parameter negotiation Power control Transparent synchronous data Broadcast Encryption Enhanced Data Rate ACL 2 Mbps mode Enhanced Data Rate ACL 3 Mbps mode Enhanced inquiry scan Interlaced inquiry scan Interlaced page scan RSSI with inquiry results AFH capable slave AFH classification slave LE Supported (Controller) 3-slot Enhanced Data Rate ACL packets 5-slot Enhanced Data Rate ACL packets Sniff subrating Pause encryption AFH capable master AFH classification master Extended Inquiry Response Simultaneous LE and BR/EDR (Controller) Secure Simple Pairing Encapsulated PDU Non-flushable Packet Boundary Flag Link Supervision Timeout Changed Event Inquiry TX Power Level Enhanced Power Control Extended features < HCI Command: Read Remote Extended F.. (0x01|0x001c) plen 3 [hci0] 127.758157 Handle: 70 Page: 1 > HCI Event: Command Status (0x0f) plen 4 [hci0] 127.763096 Read Remote Extended Features (0x01|0x001c) ncmd 1 Status: Success (0x00) > HCI Event: Read Remote Extended Features (0x23) plen 13 [hci0] 127.770079 Status: Success (0x00) Handle: 70 Page: 1/1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) < HCI Command: Remote Name Request (0x01|0x0019) plen 10 [hci0] 127.770117 Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) Page scan repetition mode: R2 (0x02) Page scan mode: Mandatory (0x00) Clock offset: 0x0000 > HCI Event: Command Status (0x0f) plen 4 [hci0] 127.776084 Remote Name Request (0x01|0x0019) ncmd 1 Status: Success (0x00) > HCI Event: Remote Name Req Complete (0x07) plen 255 [hci0] 127.806077 Status: Success (0x00) Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) Name: PTS-BNEP-GOWTHAM-AB < HCI Command: Authentication Requested (0x01|0x0011) plen 2 [hci0] 127.806149 Handle: 70 @ Device Connected: 00:1B:DC:07:33:4E (0) flags 0x0000 14 09 50 54 53 2d 42 4e 45 50 2d 47 4f 57 54 48 ..PTS-BNEP-GOWTH 41 4d 2d 41 42 AM-AB > HCI Event: Command Status (0x0f) plen 4 [hci0] 127.808035 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 [hci0] 127.809039 Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) < HCI Command: Link Key Request Negat.. (0x01|0x000c) plen 6 [hci0] 127.809070 Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) > HCI Event: Command Complete (0x0e) plen 10 [hci0] 127.815041 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 Status: Success (0x00) Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) > HCI Event: IO Capability Request (0x31) plen 6 [hci0] 127.816039 Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) < HCI Command: IO Capability Request... (0x01|0x002b) plen 9 [hci0] 127.816068 Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) IO capability: DisplayYesNo (0x01) OOB data: Authentication data not present (0x00) Authentication: General Bonding - MITM required (0x05) > HCI Event: Command Complete (0x0e) plen 10 [hci0] 127.820040 IO Capability Request Reply (0x01|0x002b) ncmd 1 Status: Success (0x00) Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) > HCI Event: IO Capability Response (0x32) plen 9 [hci0] 127.842137 Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) IO capability: DisplayYesNo (0x01) OOB data: Authentication data not present (0x00) Authentication: General Bonding - MITM not required (0x04) > HCI Event: User Confirmation Request (0x33) plen 10 [hci0] 128.242120 Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) Passkey: 564246 @ User Confirmation Request: 00:1B:DC:07:33:4E (0) hint 0 value 564246 > HCI Event: Simple Pairing Complete (0x36) plen 7 [hci0] 158.243129 Status: Authentication Failure (0x05) Address: 00:1B:DC:07:33:4E (Vencer Co., Ltd.) > HCI Event: Auth Complete (0x06) plen 3 [hci0] 158.244139 Status: Authentication Failure (0x05) Handle: 70 @ Authentication Failed: 00:1B:DC:07:33:4E (0) status 0x05 < HCI Command: Read Clock Offset (0x01|0x001f) plen 2 [hci0] 158.270357 Handle: 70 > HCI Event: Command Status (0x0f) plen 4 [hci0] 158.272106 Read Clock Offset (0x01|0x001f) ncmd 1 Status: Success (0x00) < HCI Command: Disconnect (0x01|0x0006) plen 3 [hci0] 158.272142 Handle: 70 Reason: Remote User Terminated Connection (0x13) > HCI Event: Read Clock Offset Complete (0x1c) plen 5 [hci0] 158.277091 Status: Success (0x00) Handle: 70 Clock offset: 0x1f88 > HCI Event: Command Status (0x0f) plen 4 [hci0] 158.278089 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 [hci0] 158.356112 Status: Success (0x00) Handle: 70 Reason: Connection Terminated By Local Host (0x16) @ Device Disconnected: 00:1B:DC:07:33:4E (0) reason 2 < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] 174.927620 Scan enable: No Scans (0x00) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 174.929118 Write Scan Enable (0x03|0x001a) ncmd 1 Status: Success (0x00) @ Class of Device Changed: 0x000000 @ New Settings: 0x0ada connectable discoverable bondable ssp br/edr le secure-conn