[Bluez-users] question about compile bluez for uclinux

["edwin" <yudachao@cellink.com.cn>]

[-- Attachment #1: Type: text/plain, Size: 1931 bytes --]

This mail is probably spam.  The original message has been attached
along with this report, so you can recognize or block similar unwanted
mail in future.  See http://spamassassin.org/tag/ for more details.

Content preview:  hello, I had download the below bluez packages:
  bluez-kernel-2.3.tar.gz bluez-libs-2.4.tar.gz bluez-sdp-1.4.tar.gz
  bluez-pan-1.1.tar.gz now I want cross-compile bluez bluetooth protocol
  stack to uclinux,my uclinux is uClinux-dist-20030522.tar.gz,and my CPU
  is samsung-s3c4510b(arm7). first,I unzip bluez-kernel-2.3.tar.gz,then I
  use ./configure command as below: ./configure --host=arm-v4l-linux
  --libdir=/home/edwin/uClinux-dist/linux-2.4.x/lib
  --includedir=/home/edwin/uClinux-dist/linux-2.4.x/include
  --with-kernel=/home/edwin/uClinux-dist/linux-2.4.x I'm not sure I use
  this command right and I don't know what I need do next step. what file
  will create by make command and how I can link the file to uclinux and
  run it? please help edwin [...] 

Content analysis details:   (6.60 points, 5 required)
MSGID_OE_SPAM_4ZERO (3.5 points)  Message-Id generated by spam tool (4-zeroes variant)
BASE64_ENC_TEXT    (1.6 points)  RAW: Message text disguised using base-64 encoding
KNOWN_MAILING_LIST (-0.9 points) Email came from some known mailing list software
RCVD_IN_RFCI       (1.4 points)  RBL: Received via a relay in ipwhois.rfc-ignorant.org
                   [RBL check: found 19.63.79.218.ipwhois.rfc-ignorant.org., type: 127.0.0.6]
RCVD_IN_SBL        (1.0 points)  RBL: Received via SBLed relay, see http://www.spamhaus.org/sbl/
                   [RBL check: found 19.63.79.218.sbl.spamhaus.org.]

The original message did not contain plain text, and may be unsafe to
open with some email clients; in particular, it may contain a virus,
or confirm that your address can receive spam.  If you wish to view
it, it may be safer to save it to a file and open it with an editor.


[-- Attachment #2: original message before SpamAssassin --]
[-- Type: message/rfc822, Size: 7978 bytes --]

[-- Attachment #2.1.1: Type: text/plain, Size: 770 bytes --]

hello,

I had download the below bluez packages:
bluez-kernel-2.3.tar.gz
bluez-libs-2.4.tar.gz
bluez-sdp-1.4.tar.gz
bluez-pan-1.1.tar.gz

now I want cross-compile bluez bluetooth protocol stack to uclinux,my uclinux is uClinux-dist-20030522.tar.gz,and my CPU is samsung-s3c4510b(arm7).

first,I unzip bluez-kernel-2.3.tar.gz,then I use ./configure command as below:

./configure --host=arm-v4l-linux --libdir=/home/edwin/uClinux-dist/linux-2.4.x/lib --includedir=/home/edwin/uClinux-dist/linux-2.4.x/include --with-kernel=/home/edwin/uClinux-dist/linux-2.4.x

I'm not sure I use this command right and I don't know what I need do next step.
what file will create by make command and how I can link the file to uclinux and run it?

please help

edwin

[-- Attachment #2.1.2: Type: text/html, Size: 1898 bytes --]