From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: =?iso-8859-1?Q?Jos=E9_S=E1nchez_S=E1nchez?= To: "'BlueZ development'" Date: Fri, 15 Jun 2007 13:00:29 +0200 Message-ID: <003e01c7af3c$65f14e00$a100010a@Libera.local> MIME-Version: 1.0 In-Reply-To: <1181903862.6846.23.camel@aeonflux.inter-touch.com> Subject: Re: [Bluez-devel] RV: sdp_connect don't work with some handsets Reply-To: BlueZ development List-Id: BlueZ development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-devel-bounces@lists.sourceforge.net Errors-To: bluez-devel-bounces@lists.sourceforge.net Hi Marcel Here you can see "hciconfig -a" result: ****************************************** [root@localhost sbin]# ./hciconfig -a hci0: Type: USB BD Address: 00:0B:0D:0B:21:6F ACL MTU: 120:20 SCO MTU: 0:0 UP RUNNING PSCAN ISCAN RX bytes:33459 acl:496 sco:0 events:750 errors:0 TX bytes:46184 acl:740 sco:0 commands:228 errors:0 Features: 0xff 0xff 0x05 0x38 0x18 0x18 0x00 0x00 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'libera networks' Class: 0x120104 Service Classes: Networking, Object Transfer Device Class: Computer, Desktop workstation HCI Ver: 1.2 (0x2) HCI Rev: 0x0 LMP Ver: 1.2 (0x2) LMP Subver: 0x757 Manufacturer: Silicon Wave (11) ******************************************* With "hcitool info MAC" I have the same problem: ******************************************* [root@localhost sbin]# hcitool info 00:19:A1:36:C5:71 (LG Handset) Requesting information ... Can't create connection: Input/output error [root@localhost sbin]# hcitool info 9A:BC:56:78:12:34 (GRUNGIG Handset) Requesting information ... Can't create connection: Input/output error [root@localhost sbin]# hcitool info 00:1A:75:12:E5:d8 (SONY-ERIC. Handset) Requesting information ... BD Address: 00:1A:75:12:E5:d8 Device Name: Z610i LMP Version: 2.0 (0x3) LMP Subversion: 0x520 Manufacturer: ST Microelectronics (48) Features: 0xff 0xeb 0x8d 0xfe 0x9b 0xe9 0x00 0x00 <3-slot packets> <5-slot packets> <3-slot EDR ACL> <5-slot EDR ACL> <3-slot EDR eSCO> ************************************** Also I can see using hcidump that the problem with hcitool is "Role change not allowed" again. **************************************** [root@localhost sbin]# ./hcidump -X -V HCI sniffer - Bluetooth packet analyzer ver 1.32 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 9A:BC:56:78:12:34 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Role Change (0x12) plen 8 status 0x00 bdaddr 9A:BC:56:78:12:34 role 0x00 Role: Master > HCI Event: Connect Complete (0x03) plen 11 status 0x21 handle 8 bdaddr 9A:BC:56:78:12:34 type ACL encrypt 0x00 Error: Role Change Not Allowed ******************************************** Regards Jose ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel