public inbox for linux-bluetooth@vger.kernel.org
 help / color / mirror / Atom feed
From: "Olivier Le Pogam" <olepogam@free.fr>
To: "BlueZ development" <bluez-devel@lists.sourceforge.net>
Subject: [Bluez-devel] Creating a connection : Error: Command Disallowed
Date: Thu, 20 Dec 2007 18:08:31 +0100	[thread overview]
Message-ID: <009b01c8432a$f2b9a800$0200a8c0@jester> (raw)


[-- Attachment #1.1: Type: text/plain, Size: 2345 bytes --]

Hello,

When I try to open 3 RFCOMM connections from the same device to 3 remote ones, the first connection is OK but the 2 following give a "Error: Command Disallowed". I suspect an incorrect bluetooth parameter in my hcid.conf (lp ? lm ?)

Any hint is welcome !

PC is running a 2.6.23.12 Kernel with BlueZ 3.23

hcidump & hciconfig are below if it can help !

Thanks a lot,
Oli

------------------------------------------------------------------------

HCI sniffer - Bluetooth packet analyzer ver 1.40
device: hci0 snap_len: 1028 filter: 0xffffffff
2007-12-20 17:58:21.442414 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:17:B0:1E:54:FD ptype 0xcc18 rswitch 0x00 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2007-12-20 17:58:21.468697 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1

2007-12-20 17:58:21.468711 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:19:2D:15:FF:0E ptype 0xcc18 rswitch 0x00 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2007-12-20 17:58:21.472695 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x0c ncmd 1
    Error: Command Disallowed

2007-12-20 17:58:21.472705 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:16:4E:83:2D:19 ptype 0xcc18 rswitch 0x00 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2007-12-20 17:58:21.476695 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x0c ncmd 1
    Error: Command Disallowed

------------------------------------------------------------------------

hci0:   Type: USB
        BD Address: 00:10:60:E8:B6:A1 ACL MTU: 384:8 SCO MTU: 64:8
        UP RUNNING
        RX bytes:9938 acl:157 sco:0 events:350 errors:0
        TX bytes:3965 acl:148 sco:0 commands:118 errors:0
        Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: SNIFF
        Link mode: MASTER
        Name: 'BlueZ'
        Class: 0x000100
        Service Classes: Unspecified
        Device Class: Computer, Uncategorized
        HCI Ver: 2.0 (0x3) HCI Rev: 0x7a6 LMP Ver: 2.0 (0x3) LMP Subver: 0x7a6
        Manufacturer: Cambridge Silicon Radio (10)

[-- Attachment #1.2: Type: text/html, Size: 4399 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

             reply	other threads:[~2007-12-20 17:08 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-12-20 17:08 Olivier Le Pogam [this message]
2007-12-20 18:17 ` [Bluez-devel] Creating a connection : Error: Command Disallowed Peter Wippich
2007-12-20 19:10   ` Marcel Holtmann
2007-12-20 20:07   ` Olivier Le Pogam
2007-12-21 10:15     ` Olivier Le Pogam
2007-12-21 13:39       ` Marcel Holtmann
2007-12-21 13:49         ` Peter Wippich
2007-12-21 14:35           ` Olivier Le Pogam
2007-12-21 14:53             ` Peter Wippich
2007-12-21 19:34               ` Olivier Le Pogam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='009b01c8432a$f2b9a800$0200a8c0@jester' \
    --to=olepogam@free.fr \
    --cc=bluez-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox