[Bluez-devel] UPDATE: org.bluez.Adapter Methods/Signals

["David Stockwell" <dstockwell@frequency-one.com>]

[-- Attachment #1.1: Type: text/plain, Size: 723 bytes --]

After installing *-3.30, when calling DiscoverDevices, with path "/hci0", RemoteDeviceFound and RemoteNameUpdated are STILL returned against path "/org/bluez/hci0", and not the originating path, "/hci0".

DS

----- Original Message ----- 
From: David Stockwell 
To: BlueZ development 
Sent: Friday, March 28, 2008 6:31 PM
Subject: Experimental Mode: org.bluez.Adapter Methods/Signals



I ask because when I tried calling DiscoverDevices, it would fail when I called with path "/org/bluez/hci0", but would run when I called it with path "/hci0".  But, the funny thing is that because the RemoteDeviceFound signal is registered to both the old path and the new path, the signals come back on "/org/bluez/hci0".

[-- Attachment #1.2: Type: text/html, Size: 1701 bytes --]

[-- Attachment #2: Type: text/plain, Size: 325 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Register now and save $200. Hurry, offer ends at 11:59 p.m., 
Monday, April 7! Use priority code J8TLD2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone

[-- Attachment #3: Type: text/plain, Size: 164 bytes --]

_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel