Re: [Bluez-devel] piconet..

["Steffen Larsen" <zool@zool.dk>]

HI Marcel and other!,

I found out what I did wrong. All my sockets and fork()'ing just worked
fine. My problem was that I tried to make:


----- Original Message -----
From: "Steffen Larsen" <zool@zool.dk>
To: <bluez-devel@lists.sourceforge.net>
Sent: Saturday, December 11, 2004 6:50 PM
Subject: Re: [Bluez-devel] piconet..


> Hi Marcel,
>
> > > I got the two others:
> > >
> > >  hci0: Type: USB
> > > BD Address: 00:01:53:00:14:EE ACL MTU: 192:8 SCO MTU: 64:8
> > > UP RUNNING PSCAN ISCAN
> > > RX bytes:81 acl:0 sco:0 events:10 errors:0
> > > TX bytes:39 acl:0 sco:0 commands:10 errors:0
> > > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> > > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> > > Link policy:
> > > Link mode: SLAVE ACCEPT
> > > Name: 'knoglen'
> > > Class: 0x000000
> > > Service Classes: Unspecified
> > > Device Class: Miscellaneous,
> > > HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
> > > Manufacturer: Cambridge Silicon Radio (10)
> > >
> > > hci0: Type: USB
> > > BD Address: 00:01:53:00:0D:B5 ACL MTU: 192:8 SCO MTU: 64:8
> > > UP RUNNING PSCAN ISCAN
> > > RX bytes:87 acl:0 sco:0 events:11 errors:0
> > > TX bytes:39 acl:0 sco:0 commands:10 errors:0
> > > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
> > > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> > > Link policy:
> > > Link mode: SLAVE ACCEPT
> > > Name: 'JESPER'
> > > Class: 0x000000
> > > Service Classes: Unspecified
> > > Device Class: Miscellaneous,
> > > HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
> > > Manufacturer: Cambridge Silicon Radio (10)
> >
> > these two are HCI 16.4 and so there should be no problem. See my CSR
> > page why it is good to have HCI 16.x at least.
> >
> > > > so far so good, but check with "hciconfig hci0 revision" for the
> > > > firmware version. This one is too old. It should be HCI 16.4 or
newer,
> > > > but if this is a DBT-120 Rev. B3 you might have a chance to update
it.
> > >
> > > Well. It is the B3 revision, so I would be able to do that. :-)
> >
> > I suppose you do that (at your own risk of course).
> >
> > > Hmm.. This dosn't really answer my question. I am using fork()., and
> would
> > > like to get my application to work. I tried to compare it towards the
> > > l2test, but couldn't see that much difference. And the l2test works
with
> the
> > > same dongles; connecting two clients against one server. Can you point
> > > somewhere in my code, where I should do some changes, so it could
work??
> >
> > Getting the fork stuff right is not very easy. You must carefully think
> > about what file descriptors to close at what time and in what process. I
> > am not going to check your code for such mistakes, because it will take
> > me too much time and the other reason is that it is C++ and not C.
>
> I understand. I have been spending alot of time in it my self. I will look
> deeper into the socket, and which of them that have been closed and at
which
> time... But I think I have checked this a million times.. But I will try
> again! :-)
>
> > Update the dongle or try to swap the pre HCI 16.4 one. The master option
> > can help, but you must choose the master device carefully.
>
> Yes I can try to swap the devices. You mention that the master device
should
> be carefully choosen. I what way?
> I have just assumed that my server should be the master, and thats that.
> What should I taken in to consideration?
>
> -Once again thanks for all the quick answers! :-)
>
> /Steffen Larsen
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel