From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <01C5D0BE.7F71DF60.emonturus@teltronic.es> From: Esteban Monturus To: "'bluez-users@lists.sourceforge.net'" Subject: [Bluez-users] Re: bluetooth 1.2 and 2.0 dongles support Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 14 Oct 2005 12:55:03 +0200 >Hi Esteban, Hi Marcel, >> I have some other questions about BlueZ I had forgotten to ask you, so >> here they go: >> 1. I would like to buy a 2.0+EDR dongle to use with BlueZ. I have visited >> your "Bluetooth device features and revision information" page, but I >> haven't found any one. Does BlueZ support Bluetooth 2.0+EDR?. >yes. EDR is fully supported. I have purchased Cellink BTA-6030 Class 1 Bluetooth 2.0 + EDR dongles >> 2. I have a Cellink BTA-3120 dongle. Although Cellink says that it is >> Bluetooth 1.2 compliant, when I use it with BlueZ, the HCI version I get >> with hciconfig is 1.1. Is that wright? >Send in the "hciconfig hci0 features" output. EWS4:/ # hciconfig hci0 features hci0: Type: USB BD Address: 00:0A:94:11:77:F5 ACL MTU: 120:20 SCO MTU: 64:0 Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00 <3-slot packets> <5-slot packets> >> 3. I also have an old Belkin F8T001 dongle. When I plugged it BlueZ loaded >> always some firmware stuff and it worked properly. My old version of BlueZ >> had a bluez-bluefw-1.0-202 rpm packet. I think this is equivalent to the >> new tarball bluez-firmware that I have downloaded from BlueZ's homepage and >> installed, but the reality is that this dongle doesn't work anymore. >Use bluez-firmware and the bcm203x kernel driver for the 2.6 kernels. How do I use this driver? I have tried to load it with insmod and I get the following: EWS4:~/paquetes_rpm # insmod /lib/modules/2.6.4-52-smp/kernel/drivers/bluetooth/bcm203x.ko insmod: error inserting '/lib/modules/2.6.4-52-smp/kernel/drivers/bluetooth/bcm203x.ko': -1 Unknown symbol in module At the same time the following lines appear in the /var/log/messages file: Oct 14 12:38:07 EWS4 kernel: bcm203x: Unknown symbol release_firmware Oct 14 12:38:07 EWS4 kernel: bcm203x: Unknown symbol request_firmware >Regards >Marcel Esteban. ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users