From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <06e001c8d01a$d21b9810$0132a8c0@Raymondpc> From: "skyflame" To: "hong zhang" , "Sanja Kolundzija" , "BlueZ development" , References: <348167.64795.qm@web57908.mail.re3.yahoo.com> Date: Tue, 17 Jun 2008 09:38:17 +0800 MIME-Version: 1.0 Subject: Re: [Bluez-devel] How to run up CSR chip without eeprom with BLUEZ ? Reply-To: BlueZ development List-Id: BlueZ development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-devel-bounces@lists.sourceforge.net Errors-To: bluez-devel-bounces@lists.sourceforge.net Hi Henry > Raymond, > > 1. Is your board designed by your company or purchased > from a vendor? > Designed by ourself, And I have run csr's bchs stack up and can play music, So I think the bluetooth hardware is ok. > 2. How do you know you use a correct psr file for > initialization? > I write the psr file according to the pskey I set in the csr's bchs stack, They should work unless, I don't know : Bluez need more pskey setting to run up the chip ? I prefer to believe that the might setting process might have some wrong in there. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel