From: Hon Weng Chong <honwchong@gmail.com>
To: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Marcel Holtmann <marcel@holtmann.org>,
"Gustavo F. Padovan" <gustavo@padovan.org>,
Johan Hedberg <johan.hedberg@gmail.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH] bluetooth: btusb: Add device ID for RTL8822BE
Date: Wed, 15 Nov 2017 10:40:35 +1100 [thread overview]
Message-ID: <0FED073A-DD17-4075-A7FD-15BD4615987E@gmail.com> (raw)
In-Reply-To: <a2c8efa7-6acb-fc97-8401-87bbc9e3d618@lwfinger.net>
Hi Larry,
Apologies for the delayed reply. Here's the data for the Realtek =
Bluetooth Device:
T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D13 Cnt=3D07 Dev#=3D 14 Spd=3D12 =
MxCh=3D 0
D: Ver=3D 1.10 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D0b05 ProdID=3D185c Rev=3D 1.10
S: Manufacturer=3DRealtek=20
S: Product=3DBluetooth Radio=20
S: SerialNumber=3D00e04c000001
C:* #Ifs=3D 2 Cfg#=3D 1 Atr=3De0 MxPwr=3D500mA
I:* If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 =
Driver=3Dbtusb
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 16 Ivl=3D1ms
E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
I:* If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 =
Driver=3Dbtusb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
I: If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 =
Driver=3Dbtusb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
I: If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 =
Driver=3Dbtusb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
I: If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 =
Driver=3Dbtusb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 25 Ivl=3D1ms
I: If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 =
Driver=3Dbtusb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 33 Ivl=3D1ms
I: If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(wlcon) Sub=3D01 Prot=3D01 =
Driver=3Dbtusb
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 49 Ivl=3D1ms
> On 12 Nov 2017, at 6:10 am, Larry Finger <Larry.Finger@lwfinger.net> =
wrote:
>=20
> On 11/11/2017 12:51 PM, Marcel Holtmann wrote:
>> Hi Larry,
>>> The Asus Z370-I contains a Realtek RTL8822BE device with an =
associated
>>> BT chip using a USB ID of 0b05:185c. This device is added to the =
driver.
>>>=20
>>> Signed-off-by: Hon Weng Chong <honwchong@gmail.com>
>>> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
>>> ---
>>> drivers/bluetooth/btusb.c | 3 +++
>>> 1 file changed, 3 insertions(+)
>>>=20
>>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>>> index 7a5c06aaa181..c265ef63cab7 100644
>>> --- a/drivers/bluetooth/btusb.c
>>> +++ b/drivers/bluetooth/btusb.c
>>> @@ -373,6 +373,9 @@ static const struct usb_device_id =
blacklist_table[] =3D {
>>> { USB_DEVICE(0x13d3, 0x3461), .driver_info =3D BTUSB_REALTEK },
>>> { USB_DEVICE(0x13d3, 0x3462), .driver_info =3D BTUSB_REALTEK },
>>>=20
>>> + /* Additional Realtek 8822BE Bluetooth devices */
>>> + { USB_DEVICE(0x0b05, 0x1185c), .driver_info =3D BTUSB_REALTEK },
>>> +
>> I prefer to have /sys/kernel/debug/usb/devices for the device =
included in the commit message.
>> Regards
>> Marcel
> Hon,
>=20
> Please provide the data.
>=20
> Larry
>=20
next prev parent reply other threads:[~2017-11-14 23:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-11 17:43 [PATCH] bluetooth: btusb: Add device ID for RTL8822BE Larry Finger
2017-11-11 18:51 ` Marcel Holtmann
2017-11-11 19:10 ` Larry Finger
2017-11-14 23:03 ` Hon Weng Chong
2017-11-14 23:40 ` Hon Weng Chong [this message]
2017-11-12 13:45 ` Bjørn Mork
2017-11-14 9:22 ` kbuild test robot
2017-11-14 9:30 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0FED073A-DD17-4075-A7FD-15BD4615987E@gmail.com \
--to=honwchong@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gustavo@padovan.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox