Hi Elimar,

> > 	T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> > 	D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > 	P:  Vendor=05ac ProdID=1000 Rev= 9.01
> > 	C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA
> > 	I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=hid
> > 	E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> > 	I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
> > 	E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> > 
> > this looks like a Bluetooth HID proxy device from CSR. You can use the
> > hid2hci program to switch it into HCI mode. However it seems that Apple
> > is using its own vendor id, so you must change this in the source code.
> 
> Where in the source code? This should be a useful info for Benjamin
> Herrenschmidt as well.
> 
> I found hid2hci In the CVS sourcecode from bluez-utils2.
> hid2hci -(0|1) gives me 
> No devices in H(CI|DI) mode found ;-(

you have to change the vendor id. The hid2hci.c source is not very
complex and I thought it is easy to see where to change the vendor id.
However the attached patch changes it for you. If it works I will write
a version of hid2hci that will also find the Apple dongle.

Regards

Marcel