Re: [Bluez-users] i-Tec Bluetooth USB dongle

Marcel Holtmann
2004-02-10T09:34:41Z

Hi Rudolf,

> I don't see any of these devices when dongle is unplugged. All these
> devices are definitely integrated in the dongle.
>
> I guess that the chip may be Broadcom 2035 (see serial no.).
>
> This is the output of the hciconfig:
>
> hci0: Type: USB
> BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
> DOWN
> RX bytes:0 acl:0 sco:0 events:0 errors:0
> TX bytes:3 acl:0 sco:0 commands:1 errors:0
>
> # hciconfig hci0 up
> Can't init device hci0. Connection timed out(110)
>
> # dmesg after dongle insertion
> hub.c: new USB device 00:07.2-2.4, assigned address 15
> hub.c: USB hub found
> hub.c: 3 ports detected
> hub.c: new USB device 00:07.2-2.4.1, assigned address 16
> hub.c: new USB device 00:07.2-2.4.2, assigned address 17
> input: USB HID v1.11 Keyboard [0a5c:0099] on usb1:17.0
> hub.c: new USB device 00:07.2-2.4.3, assigned address 18
> input: USB HID v1.11 Mouse [0a5c:0097] on usb1:18.0
>
> # /var/log/daemon.log removal and insertion
>
> Feb 10 09:54:22 Cipisek hcid[739]: HCI dev 0 unregistered
> Feb 10 09:54:36 Cipisek hcid[739]: HCI dev 0 registered
> Feb 10 09:54:46 Cipisek hcid[10193]: Can't init device hci0. Connection
> timed out(110)
>
> If you wish, I can create an account on my machine and you can try to
> dig in by yourself. Maybe you will be much more sucessful.

thanks for the offer, but I can't do anything without proper information
about these dongle. You must log the USB traffic on a Windows machine
with USB SnoopyPro (http://sourceforge.net/projects/usbsnoop/). There
must be some kind of firmware loading or switching stuff to make these
dongle working.