Re: [Bluez-users] apple wireless mouse on apple ibook (g4, builtin usb)

[Marcel Holtmann <marcel@holtmann.org>]

Hi Sunnan,

> I don't know how to show how it was before. Now it shows:
> 
> slowstorm/home/sunnan% sudo hciconfig -a
> hci0:   Type: USB
>           BD Address: 00:0D:93:04:19:15  ACL MTU: 192:8  SCO MTU: 64:8
>           UP RUNNING PSCAN ISCAN
>           RX bytes:6963 acl:399 sco:0 events:198 errors:0
>           TX bytes:2109 acl:66 sco:0 commands:62 errors:0
>           Features: 0xff 0xff 0x0f 0x00 0x18 0x18 0x00 0x00
>           Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
>           Link policy: RSWITCH HOLD SNIFF PARK
>           Link mode: SLAVE ACCEPT
>           Name: 'slowstorm-0'
>           Class: 0x000100
>           HCI Ver: 1.1 (0x1) HCI Rev: 0x8503  LMP Ver: 1.1 (0x1) LMP
> Subver: 0x8503
>           Manufacturer: not assigned (2560)

I don't know what kind of module this is. Please run "hcidump -w <file>"
before running "hciconfig -a" and send us the dump. Maybe we have a big
endian problem here. What bluez-utils version do you have installed?

> One of the more interesting(?) entries in my /var/log/daemon.log after
> doing this was:
> 
> Feb 13 19:38:29 slowstorm sdpd[25047]: init_server: binding L2CAP
> socket: Address already in use

You can't rund sdpd twice, but for HID support this is irrelevant.

> hcidump -w dump.data
> 
> printed:
> HCIDump - HCI packet analyzer ver 1.5
> device: hci0 snap_len: 1028 filter: 0xffffffff
> 
> but never quit. I checked dump.data with wc from time to time but it
> never appeared to get any largers.
> 
> I got childishly impatient after a couple of minutes and hit C-c. I
> attached the file anyway. Is it supposed to take very long time? If so,
> I could give it another go. Thanks for your patience.

This is correct, because you have to terminate it with CTRL-C.

> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
> D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=05ac ProdID=8203 Rev= 9.01
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> I:  If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

Reboot your machine and show me this file before you run hid2hci.

Regards

Marcel




-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users