From: Marcel Holtmann <marcel@holtmann.org>
To: Florian <Kimpenhaus@gmx.de>
Cc: BlueZ Mailing List <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Bluetooth Access Point elmeg D@VOS-44.dsl
Date: Thu, 26 Feb 2004 14:25:19 +0100 [thread overview]
Message-ID: <1077801919.2754.38.camel@pegasus> (raw)
In-Reply-To: <opr3y5uonaqdj9uv@mail.gmx.de>
Hi Florian,
> sorry my fault Link mode was master. Now I get
>
>
> bash-2.05b# dund --nodetach --connect 00:0B:CE:00:01:8E --msdun
> dund[6848]: DUN daemon ver 1.1
> dund[6848]: Searching for LAP on 00:0B:CE:00:01:8E
> dund[6848]: Connecting to 00:0B:CE:00:01:8E channel 1
> dund[6848]: Connection established
>
> bash-2.05b# hcid -n
> hcid[6838]: HCI daemon ver 2.3 started
> hcid[6838]: HCI dev 0 up
> hcid[6838]: Starting security manager 0
> hcid[6838]: link_key_request (sba=51:3D:23:C9:03:00, dba=8E:01:00:CE:0B:00)
> hcid[6838]: link_key_request (sba=51:3D:23:C9:03:00, dba=8E:01:00:CE:0B:00)
>
> bash-2.05b# hcidump
> HCIDump - HCI packet analyzer ver 1.5
> device: hci0 snap_len: 1028 filter: 0xffffffff
> < HCI Command: Read Local Supported Features(0x04|0x0003) plen 0
> > HCI Event: Command Complete(0x0e) plen 12
> < HCI Command: Read Buffer Size(0x04|0x0005) plen 0
> > HCI Event: Command Complete(0x0e) plen 11
> < HCI Command: Read BD ADDR(0x04|0x0009) plen 0
> > HCI Event: Command Complete(0x0e) plen 10
> < HCI Command: Read Voice Setting(0x03|0x0025) plen 0
> > HCI Event: Command Complete(0x0e) plen 6
> < HCI Command: Set Event Filter(0x03|0x0005) plen 2
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Page Timeout(0x03|0x0018) plen 2
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Connection Accept Timeout(0x03|0x0016) plen 2
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Scan Enable(0x03|0x001a) plen 1
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Authentication Enable(0x03|0x0020) plen 1
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Encryption Mode(0x03|0x0022) plen 1
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Write Class of Device(0x03|0x0024) plen 3
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Change Local Name(0x03|0x0013) plen 248
> > HCI Event: Command Complete(0x0e) plen 4
> < HCI Command: Create Connection(0x01|0x0005) plen 13
> > HCI Event: Command Status(0x0f) plen 4
> > HCI Event: Role Change(0x12) plen 8
> > HCI Event: Link Key Request(0x17) plen 6
> < HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
> > HCI Event: Command Complete(0x0e) plen 10
> > HCI Event: Connect Complete(0x03) plen 11
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 1 scid 0x0040
> < HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
> > HCI Event: Command Complete(0x0e) plen 6
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > HCI Event: Max Slots Change(0x1b) plen 3
> > HCI Event: Link Key Request(0x17) plen 6
> < HCI Command: Link Key Request Reply(0x01|0x000b) plen 22
> > HCI Event: Command Complete(0x0e) plen 10
> > ACL data: handle 0x0006 flags 0x02 dlen 16
> L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 0
> > ACL data: handle 0x0006 flags 0x02 dlen 16
> L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
> MTU 2016
> < ACL data: handle 0x0006 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> < ACL data: handle 0x0006 flags 0x02 dlen 22
> L2CAP(d): cid 0x40 len 18 [psm 1]
> SDP SSA Req: tid 0x0 len 0xd
> pat uuid-16 0x1102 (LAN)
> max 0xffff
> aid(s) 0x0004 (ProtocolDescList)
> cont 00
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 1
> L2CAP(d): cid 0x40 len 31 [psm 1]
> SDP SSA Rsp: tid 0x0 len 0x1a
> cnt 0x17
> len 0x17 frm->len 0x15 n 0x14
> srv rec #0
> aid 0x0004 (ProtocolDescList)
> uuid-16 0x0100 (L2CAP)
> uuid-16 0x0003 (RFCOMM) uint 0x1
> cont 00
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(s): Connect req: psm 3 scid 0x0041
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> > ACL data: handle 0x0006 flags 0x02 dlen 16
> L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0
> < ACL data: handle 0x0006 flags 0x02 dlen 16
> L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4
> MTU 1024
> > ACL data: handle 0x0006 flags 0x02 dlen 16
> L2CAP(s): Config req: dcid 0x0041 flags 0x0000 clen 4
> MTU 2016
> < ACL data: handle 0x0006 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 14
> L2CAP(s): Config rsp: scid 0x0041 flags 0x0000 result 0 clen 0
> < ACL data: handle 0x0006 flags 0x02 dlen 8
> L2CAP(d): cid 0x40 len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 8
> L2CAP(d): cid 0x41 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> < ACL data: handle 0x0006 flags 0x02 dlen 18
> L2CAP(d): cid 0x40 len 14 [psm 3]
> RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
> dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size 1019
> max_r
> etrans 0 credits 7
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 18
> L2CAP(d): cid 0x41 len 14 [psm 3]
> RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
> dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0 frame_size 1019
> max_r
> etrans 0 credits 0
> < ACL data: handle 0x0006 flags 0x02 dlen 8
> L2CAP(d): cid 0x40 len 4 [psm 3]
> RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> > ACL data: handle 0x0006 flags 0x02 dlen 8
> L2CAP(d): cid 0x41 len 4 [psm 3]
> RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(d): cid 0x40 len 8 [psm 3]
> RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
> dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> > ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(d): cid 0x41 len 8 [psm 3]
> RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
> dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> < ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(d): cid 0x40 len 8 [psm 3]
> RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
> dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> > ACL data: handle 0x0006 flags 0x02 dlen 9
> L2CAP(d): cid 0x41 len 5 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c
> > ACL data: handle 0x0006 flags 0x02 dlen 12
> L2CAP(d): cid 0x41 len 8 [psm 3]
> RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
> dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
> < ACL data: handle 0x0006 flags 0x02 dlen 9
> L2CAP(d): cid 0x40 len 5 [psm 3]
> RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86
> < ACL data: handle 0x0006 flags 0x02 dlen 14
> L2CAP(d): cid 0x40 len 10 [psm 3]
> RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 6 fcs 0x9a
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > HCI Event: Number of Completed Packets(0x13) plen 5
> > ACL data: handle 0x0006 flags 0x02 dlen 48
> L2CAP(d): cid 0x41 len 44 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 39 fcs 0x5c
> > ACL data: handle 0x0006 flags 0x02 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 13
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 13
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 17
> > ACL data: handle 0x0006 flags 0x01 dlen 13
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
> > ACL data: handle 0x0006 flags 0x02 dlen 47
> L2CAP(d): cid 0x41 len 43 [psm 3]
> RFCOMM(d): UIH: cr 0 dlci 2 pf 0 ilen 39 fcs 0x40
>
>
>
>
> looks like we are on stepp away from getting this working.
> So could you tell me what comes next or is there a nice howto
> for the next step(s)(I am getting a bad conscience writing so
> many begging mails and keep you off your work) If no howto exist
> I promise to write one if I get it running.
you should have a working PPP over RFCOMM connection. There are many
howto's at http://www.holtmann.org/linux/bluetooth/ and now it is only a
problem of using the right PPP settings.
Regards
Marcel
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2004-02-26 13:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-25 15:23 [Bluez-users] Bluetooth Access Point elmeg D@VOS-44.dsl Florian
2004-02-25 16:18 ` Marcel Holtmann
2004-02-25 18:11 ` Florian
[not found] ` <opr3xs5louqdj9uv@mail.gmx.de>
2004-02-25 18:42 ` Marcel Holtmann
[not found] ` <opr3xydd1hqdj9uv@mail.gmx.de>
2004-02-25 20:28 ` Marcel Holtmann
[not found] ` <opr3x23lc1qdj9uv@mail.gmx.de>
2004-02-25 22:12 ` Marcel Holtmann
[not found] ` <opr3x77rphqdj9uv@mail.gmx.de>
2004-02-25 23:51 ` Marcel Holtmann
[not found] ` <opr3x8uqadqdj9uv@mail.gmx.de>
2004-02-26 0:58 ` Marcel Holtmann
[not found] ` <opr3yb4dsoqdj9uv@mail.gmx.de>
2004-02-26 1:18 ` Marcel Holtmann
[not found] ` <opr3y5uonaqdj9uv@mail.gmx.de>
2004-02-26 13:25 ` Marcel Holtmann [this message]
[not found] ` <opr31ccpcoqdj9uv@mail.gmx.de>
2004-02-27 15:30 ` Marcel Holtmann
[not found] ` <opr4anrqloqdj9uv@mail.gmx.de>
2004-03-03 17:24 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1077801919.2754.38.camel@pegasus \
--to=marcel@holtmann.org \
--cc=Kimpenhaus@gmx.de \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox