From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Socket G card newbie Q From: Marcel Holtmann To: John McCorquodale Cc: BlueZ Mailing List In-Reply-To: <20040307214224.GB18481@viz.cacr.caltech.edu> References: <20040307214224.GB18481@viz.cacr.caltech.edu> Content-Type: text/plain Message-Id: <1078704901.15279.6.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 08 Mar 2004 01:15:01 +0100 Hi John, > I'm trying to get my socket CF G card to work in my pcmcia slot. Just trying > to get to the point where I can do an hci scan. From what I've been able to > glean from the list and howtos, this is my approach: > > 1. pcmcia-cs loads G card as serial_cs (minicom on ttyS0 shows a packet > coming in every half-second or so, but I don't know what baud rate > I should be using, nor what HCI packets look like, so I can only assume > that it's correct) > > 2. All bluez support built in to kernel (2.6.3-mm2, 2.4.25, 2.4.20 all > tried with same results) > > 3. hciattach ttyS0 csr 230400 > Responds: "Initialization timed out." > > Anybody care to kick me a step further in the right direction on this sunny > southern California afternoon? you should use "hciattach ttyS0 bcsp 230400", because the Socket card uses the BCSP transport protocol. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users