From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Socket G card newbie Q From: Marcel Holtmann To: John McCorquodale Cc: BlueZ Mailing List In-Reply-To: <20040308004811.GA19145@viz.cacr.caltech.edu> References: <20040307214224.GB18481@viz.cacr.caltech.edu> <1078704901.15279.6.camel@pegasus> <20040308002100.GA19049@viz.cacr.caltech.edu> <1078705579.15279.18.camel@pegasus> <20040308004811.GA19145@viz.cacr.caltech.edu> Content-Type: text/plain Message-Id: <1078707603.15279.27.camel@pegasus> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Date: Mon, 08 Mar 2004 02:00:03 +0100 Hi John, > Progress. 2.4.25 produces different behavior: > > First time loading it says: > bcsp_recv: Out-of-order packet arrived, expected 1 got 0 this is ok. You can ignore this message. > Second time loading it says: > Unknown device type or id This looks like that your command parameters are wrong. > In 2.4.20, it always says "Unknown device type or id". You need to have BCSP enabled for the hci_uart module. > 1) Is there maybe a new G card device id out there, or should I be using > some other bluez than that which ships with 2.4.25? The 2.4.25 should be fine. > 2) Is there a patch for the 2.6 serial problem? Not that I know of. Some cards are working and some are not. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users