Re: [Bluez-devel] rfcomm connection send data

[Marcel Holtmann <marcel@holtmann.org>]

Hi Franz,

> i=B4m trying to develop an application using the bluezstack (usb dongle=
)  and
> the sonyericsson p900.
> i=B4m able to connect the two devices via rfcomm.
>=20
> rfcomm connect 0 00:00:00:00:00:00  5
> Connected /dev/rfcomm0 to 00:00:00:00:00:00  on channel 5
> Press CTRL-C for hangup
>=20
> now i want to send data(string) from one device to the other.
> on the p900 i use MIDlets and the java bluetooth api.=20
>=20
> if i start listening and dump with ./rctest -d and trying to connect th=
e
> p900 the following message returns:
> ./rctest -d
> rctest: Waiting for connection on channel 10 ...
> rctest: Connect from 00:00:00:00:00:00 (p900 adress)
> rctest: Receiving ...
>=20
> an nothing happens...
> i use in the MIDlet the command: connector client =3D (StreamConnection=
)
> Connector.open(btspp://dongle adress and channel));
>=20
> so the connection seems to work alright.
>=20
> the data i want to send is a string saved in content:
> output =3D client.openOutputStream();
> byte[] data =3D content.getBytes();
> output.write(data);
>=20
> the p900 confirms it sended the data and rctest gives no error message =
or
> anything.

run "hcidump -x" (as root) and see what happens on the Linux side.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel