* [Bluez-users] Question regarding Rfcomm-Timeout
@ 2004-03-16 14:03 Thomas Eller
0 siblings, 0 replies; 3+ messages in thread
From: Thomas Eller @ 2004-03-16 14:03 UTC (permalink / raw)
To: BlueZ Mailing List
Hello, there !
I'm using the rfcomm executable from bluez-utils to connect to a
bluetooth device. It looks like this:
rfcomm connect 0 xx:xx:xx:xx:xx:xx 1
If the remote device is not present the rfcomm-connect ends with a
timeout after ~20s with the error-message: "Can't connect..... ...Host
is down."
Where can i push this 20s-timeout down to a lower value ???
I see in the source-code that a socket-connection is made, so possibly
there may be a parameter that can be configured through the
proc-filesystem ?!?
Regards,
Tom
--
---------------------------
Thomas Eller
te@identisys.de
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Bluez-users] Question regarding rfcomm-timeout
@ 2004-03-16 14:29 Thomas Eller
2004-03-16 14:47 ` Marcel Holtmann
0 siblings, 1 reply; 3+ messages in thread
From: Thomas Eller @ 2004-03-16 14:29 UTC (permalink / raw)
To: bluez-users
Hello, there !
I'm using the rfcomm executable from bluez-utils to connect to a
bluetooth device. It looks like this:
rfcomm connect 0 xx:xx:xx:xx:xx:xx 1
If the remote device is not present the rfcomm-connect ends with a
timeout after ~20s with the error-message: "Can't connect..... ...Host
is down."
Where can i push this 20s-timeout down to a lower value ???
I see in the source-code that a socket-connection is made, so possibly
there may be a parameter that can be configured through the
proc-filesystem ?!?
Regards,
Tom
--
---------------------------
Thomas Eller
te@identisys.de
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Bluez-users] Question regarding rfcomm-timeout
2004-03-16 14:29 [Bluez-users] Question regarding rfcomm-timeout Thomas Eller
@ 2004-03-16 14:47 ` Marcel Holtmann
0 siblings, 0 replies; 3+ messages in thread
From: Marcel Holtmann @ 2004-03-16 14:47 UTC (permalink / raw)
To: Thomas Eller; +Cc: BlueZ Mailing List
Hi Thomas,
> I'm using the rfcomm executable from bluez-utils to connect to a
> bluetooth device. It looks like this:
>
> rfcomm connect 0 xx:xx:xx:xx:xx:xx 1
>
> If the remote device is not present the rfcomm-connect ends with a
> timeout after ~20s with the error-message: "Can't connect..... ...Host
> is down."
>
> Where can i push this 20s-timeout down to a lower value ???
>
> I see in the source-code that a socket-connection is made, so possibly
> there may be a parameter that can be configured through the
> proc-filesystem ?!?
the timeout you talk about is the page timeout and it is a HCI specific
parameter.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-03-16 14:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-16 14:29 [Bluez-users] Question regarding rfcomm-timeout Thomas Eller
2004-03-16 14:47 ` Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2004-03-16 14:03 [Bluez-users] Question regarding Rfcomm-Timeout Thomas Eller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).